Instruction/ maintenance manual of the product G6KR SkyLink
Go to page of 2
1. INTRODUCTION Model G6KR Garage Door Remote Control 2. INSTALLATION Unplug the power cord of your garage door opener before installation to ensure power is not connected. WARNING GTR Smart Button TM The GTR Smart Button TM replaces most garage door “push buttons” or “wall consoles”.
Erase remote controls To erase unwanted remote control(s), first erase all remote controls, then learn the ones you would like to keep. To erase remote control(s) 1. Press and hold the learn button for approx 10 seconds. 2. The LED will flash rapidly after 10 seconds to indicate all the pro- grammed remote controls have been erased.
An important point after buying a device SkyLink G6KR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink G6KR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink G6KR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink G6KR you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink G6KR will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink G6KR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink G6KR.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink G6KR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink G6KR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
