Instruction/ maintenance manual of the product G5K SkyLink
Go to page of 2
Thank you for your purchase of the Skylink garage door remote control, Model G5K. There are 3 different steps you need to setup in order to use this universal garage door remote control to operate your existing garage door opener.
If your S ears ® , Chamberlain ® or Lift-Master ® transmitter has three buttons (two small, one large) (Diagram G) then the button that operates the receiver will determine how to set the number 1 DIP switch of the Skylink transmitter.
An important point after buying a device SkyLink G5K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink G5K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink G5K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink G5K you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink G5K will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink G5K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink G5K.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink G5K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink G5K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
