Instruction/ maintenance manual of the product ad-103 SkyLink
Go to page of 10
Emergency Dialer DIAL-ALERT MODEL: AD-103 101Z852 www .skylinkhome.com TM NOV , 2010 CUSTOMER SERVICE 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 T el : (800) 304-1 187 Fax : (800) 286-1320 Email : support@skylinkhome.
– 2 – SKYLINK TECHNOLOGIES INC. Y our Guide to the Emergency Dialer DIAL-ALERT MODEL: AD-103 TM The AD-103 Emergency Dialer cont ains all the above items.
– 3 – T ABLE OF CONTENTS P ACKAGE CONTENTS............................................................................................4 OVERVIEW .....................................................................................................5 INST ALLA TION.
All materials required for installation are included with this package 1 Dial-Alert (AD-103) 1 T elephone Line 1 antenna (installed) 1 AC adapter 1 9 volt alkaline battery 1 Pack of screws and anchors (for Dial-Alert ) One template Double sided tape User's instructions Warranty Card Quick Guide – 4 – P ACKAGE CONTENTS – 17 – 2.
– 5 – OVERVIEW The AD-103 Dial-Alert can call multiple telephone numbers and sends a personalized pre-recorded message. The person receives the emergency message can confirm receipt of that message by pressing the "#" key on their telephone.
– 6 – INST ALLA TION The Dial-Alert i s i nstalled using the screws provided. We have also included do uble sided tape, to use for temporary installation while you are positioning the dialer . Once the dialer is positioned correctly , install it permanently with screws.
– 7 – INST ALLA TION 3 . Thread the AC adapter cord through the top hole in the back of the unit and plug it into the AC connector on the circuit board as shown. The adapter cord must be inserted through the back of the unit before it is attached to the wall.
– 8 – INST ALLA TION S peaker On/Off Switch The speaker must be on during pro- gramming and recording the voice message in order to use the playback feature. For security purposes, the speaker may be turned off after pro- gramming to allow for silent dialing when the dialer is activated.
– 9 – LIGHTS AND SOUNDS Below is an explanation of the lights and sounds of the Dial-Alert LIGHTS ACPWR light on dialer is being powered by AC adapter . ACPWR light off dialer is not receiving any AC power . LOBA TT . light off backup battery is connected and working.
– 10 – ST ANDARD PROGRAMMING There are a few programming steps you must perform before the dialer can operate. Please follow the instructions below to program these fields, including: - Record voi.
An important point after buying a device SkyLink ad-103 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink ad-103 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink ad-103 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink ad-103 you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink ad-103 will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink ad-103, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink ad-103.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink ad-103. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink ad-103 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
