Instruction/ maintenance manual of the product 18TR SkyLink
Go to page of 2
1. INTRODUCTION Skylink ® Garage Door Remote Control Model 18TR 2. INSTALLATION In this package , you will find a keychain transmitter with 12V al kaline battery, a garage door receiver, a red / black wire and a mounting bracket. The following instructions will show you how to install the rece iver.
If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge.
An important point after buying a device SkyLink 18TR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink 18TR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink 18TR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink 18TR you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink 18TR will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink 18TR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink 18TR.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink 18TR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink 18TR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
