Instruction/ maintenance manual of the product SPA-1001 Sipura Technology
Go to page of 16
Sipura SPA-1001 Simplified Users Guide Version 1.1a A Step by Step Introduction Written by Jason from JMG Technology http://www.jmgtechnology.com.au.
Section 1 – Getting Started When you receive your SPA-1001 it should contains the following items: 1. SPA-1001 2. Power supply 3. Phone cable 4. Network cable 5.
Section 2 – Configuring the SPA-1001 via the Web Interface Once you have the IP address of your SPA-1001 you can access the web interfac e by opening a web browser and typing the following in the Address : http:// <IP Address of SPA-1001> For example: http://192.
Section 3 – Regional Settings Click on the “ Regional ” tab. The following changes are optional, however they will make your SPA -3000 sound more Australian. Under the Call Progress Tones a nd Distinctive Ring Patterns headings change: Dial tone : 400@-19,425@-19,450@-19;10(*/0/1+2+3) Busy Tone : 425@-19;10(.
The following changes are required under the Miscellaneous he ading : FXS Port Impedance : 220+820||115nF If you would like to configure the Time and Daylight savings, see A ppendix D .
Section 4 – Line 1 or Line 2 Settings Click on the “ Line 1 ” or “ L ine 2 ” tab. The settings for Line 1 and Line 2 are identical, so for e ach provider you want to register follow the instructions below: The first thing that needs to be changed is under the Proxy and Registra tion heading.
The next thing that needs to be altered is under the A udio Configuration heading. The following change is required. Preferred Codec : G729a The final item that requires changing is under the Dial Pla n heading. The dial plan will vary from provider to provider.
Section 5 – Phone Settings Click on the “ Phone ” tab. Under the Line Section heading, you can set which line (or provide r) you wish to use as your default outbound provider. Default Line : Line 1 or Line 2 (which ever you choose) Alt Dial Tone Multiplier : Used to convert the dial tone, so you know you have switched lines.
Appendix A – Dial Plans Dial plans can be very confusing at first glance. However they a re invaluable feature of the SPA-1001 so you should at least learn the basics of how the y work. The following dial plans are to show how to use the various features of dial plans.
Appendix B - Factory Reset To perform a factory reset on your SPA-1001 dial **** on the phone. You should hear a Sipura message asking you to enter your selection. . Then di al 73738#. WARNING : This will restore your unit back to factory defaults, a ll your information will be lost.
Appendix C – Upgrading Firmware The latest firmware for the Sipura SPA-1001 can be locate d on the Sipura support site. http://www.sipura.com/support/index.htm To upgrade the firmware in your SPA-1001 download the latest firmware, unz ip it and run the exe file provided.
Click on the Upgrade button to begin the upgrade procedure. The upgrade it self should only take a minute or so. Whatever you do don't turn the power of duri ng this operation. Once the procedure has finished, you should be presented with the following scre en and your upgrade has been completed.
Appendix D – Setting up a Time Server and Daylight Saving Ru les You can configure the SPA-3000 to automatically retrieve t he current date and time. (Including daylight savings). To do this you will need t o enter in a NTP server. Some providers will provide you with one.
Appendix E – Sipura IVR (Phone Menu) The Interactive Voice Response (IVR) capabilities of the SPA are designed to give the administrator and/or user basic read/write capabilities such that the unit can attain basic IP network connectivity and the more advanced browser-base d configuration menu may be accessed.
IVR Action IVR Menu Choice Parameters Notes Check Firmware Version 150 None IVR will announce the version of the firmware running on the SPA. Check Primary DNS Server Setting 160 None IVR will announce the current setting in the Primary DNS field. Set Primary DNS Server Setting 161 Enter IP address using numbers on the telephone key pad.
Appendix F – Sipbroker Sipbroker is a free service that allows you to dial betwe en certain VoIP providers. To use sipbroker you will need to add the following entry to your dial pl an. <**,:>[x*][x*].<:@sipbroker.com> Please see http://www.
An important point after buying a device Sipura Technology SPA-1001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sipura Technology SPA-1001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sipura Technology SPA-1001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sipura Technology SPA-1001 you will learn all the available features of the product, as well as information on its operation. The information that you get Sipura Technology SPA-1001 will certainly help you make a decision on the purchase.
If you already are a holder of Sipura Technology SPA-1001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sipura Technology SPA-1001.
However, one of the most important roles played by the user manual is to help in solving problems with Sipura Technology SPA-1001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sipura Technology SPA-1001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
