Instruction/ maintenance manual of the product 5000AL Sioux Tools
Go to page of 20
Page No 1 Safety rules when using 5000A/5000AL/5000AP Imp act Wrenches – Use only impact sockets and extensions, universal joint s, etc. rated as being suitable for use with impact wrenches. – Prolonged exposure to vibration may cause injury . – Read all instructions before using this tool.
Page No 2 – T ake care against entanglement of the moving parts of the tool with clothing, hair , ties, cleaning rags, rings, jewelry , watches, bracelets, etc. This could cause the body or part s of the body to be drawn towards and in contact with the moving parts of the tool and could be very dangerous.
Page No 3 Printed in T aiwan Dismantling & Assembly Instructions Disconnect tool from air supply . Unscrew hammer case cap screws (38) and take of f hammer case (36). T ake out hammer case pilot (35) and anvil (39, 39B or 39C) from hammer case (36).
Page No 4 Règles de sécurité pour l’emploi des clés à chocs 5000A/5000AL/5000AP • Employez seulement des douilles, rallonges, cardans, etc. pour clé à choc qui réspondent aux conditions nominales de fonctionnement de la clé à chocs. • Une exposition prolongée aux vibrations peut causer des blessures.
Page No 5 St ations de travail Cet outil est destiné à un usage manuel seulement. On recommande d’employer l’outil en position debout et sur un sol ferme.
Page No 6 Impremé au T aiwan Instructions de démontage et de mont age Déconnectez l’outil de l’arrivée d’air . Dévissez les vis de fixation du carter de marteau (38) et retirez le carter de marteau (36). Retirez le pilote de carter de marteau (35) et l’enclume (39, 39B ou 39C) du carter de marteau (36).
Page No 7 Vibrationspegel: 13 m/Sek. Testverfahren: Getestet nach der ISO-Norm 8662 Teile 1 & 7 Lärmpegel: Lärmdruckpegel 97,0 dB (A) Lärmleistungspegel 108,0 dB (A) Testverfahren: Getestet nach dem Pneurop- Testcode PN8NTC1 und der ISO-Norm Nr.
Page No 8 V orgesehener Einsatzbereich des Werkzeugs – 5000A/5000AL/5000AP Der Schlagschrauber ist zum Festziehen und Lösen von V erbindungselementen mit Gewinden innerhalb des vom Hersteller genannten Einsatzbereichs gedacht. Er darf nur mit geeigneten12,7 mm Innenvierkantaufsätzen für Einschlagmuttern verwendet werden.
Page No 9 Gedruckt in T aiwan Anleitungen zum Auseinander- und Zusammenbau Das Werkzeug von der Luftzufuhr abtrennen. Die Kopfschrauben (38) des Hammergehäuses abschrauben, und das Hammergehäuse (36) abnehmen. Den Führungsring (35) und den Amboss (39, 39B oder 39C) des Hammergehäuses vom Hammergehäuse (36) abnehmen.
Page No 10 Nivel de vibración: 13 metros/seg 2 Método de prueba: Prueba efectuada de acuerdo con las normas ISO 8662, partes 1 & 7 Nivel de ruido: Nivel de presión de sonido 97,0 dB (A) Nivel de potencia de sonido 108,0 dB (A) Método de prueba: Prueba efectuada de acuerdo con el código de pruebas Pneurop PN8NTC1 y la norma ISO 3744.
Page No 11 Uso anticip ado de la herramient a – 5000A/5000AL/5000AP La llave de impacto ha sido diseñada para apretar y aflojar los fijadores de rosca dentro de la gama especificada por el fabricante. La herramienta se debe usar solamente con casquillos hembra apropiados de 12,7 mm, de tipo de impacto, para enroscar tuercas.
Page No 12 Impreso en T aiwan Instrucciones para mont ar y desmont ar la herramient a Desconecte la herramienta del suministro de aire. Destornille los tornillos de cabeza (38) de la caja del martillo y saque la caja del martillo (36) hacia fuera.
Page No 13 Trillingsnivo: 13 m/s Test methode: getest in overeenstemming met ISO 8662, gedeelte 1 & 7 Geluidsnivo: Geluidsdruk niveau 97,0 dB (A) Geluidskracht niveau 108,0 dB (A) Test methode: Getest in overeenstemming met de Pneurop test code PN8NTC1 en ISO standaard 3744.
Page No 14 T e verwachten gebruik van het gereedschap – 5000A/5000AL/5000AP De slagmoersleutel is alleen ontworpen voor het aandraaien en losdraaien van met schroefdraad voorziene bevestigingsmiddelen, binnen het door de fabrikant gespecificeerde bereik.
Page No 15 Gedrukt in T aiwan Demont age en Mont age Instructies Maak het gereedschap los van de luchttoevoer . Schroef de moerbouten (38) van de hamerbehuizing los en haal de hamerbehuizing (36) eraf. Haal de geleiding (35) en het aambeeld (39, 39B of 39C) uit de hamerbehuizing (36).
Page No 16 Livello di vibrazioni 13 m/sec 2 Metodo di collaudo: Collaudato secondo gli standard ISO 8662, parti 1 e 7 Rumorosità: Pressione acustica 97,0 dB (A) Potenza acustica 108,0 dB (A) Metodo di collaudo: Collaudato secondo la normativa di collaudo Pneurop PN8NTC1 e Standard ISO 3744.
Page No 17 Post azioni di lavoro L ’utensile deve essere usato solo come strumento a mano. Si raccomanda di usare l’utensile stando in piedi su un piano solido.
Page No 18 S tampato in T aiwan Istruzioni per mont aggio e smont aggio Scollegare l’utensile dal sistema di alimentazione dell’aria. Svitare le viti (38) sulla calotta dell’alloggiamento del meccanismo di percussione (36).
Page No 19 5000A 1/2" Pistol Grip T win Hammer Impact W rench 5000AL Model 5000A with 2" Extended Anvil 5000AP Model 5000A with Pin Anvil Ref. No. Part No. Description Ref. No. Description Part No. 25 505822A Cylinder Dowel 26 505823A Hammer Case Bushing 27 505824A Rotor Blade (6 pc.
Page No 20.
An important point after buying a device Sioux Tools 5000AL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sioux Tools 5000AL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sioux Tools 5000AL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sioux Tools 5000AL you will learn all the available features of the product, as well as information on its operation. The information that you get Sioux Tools 5000AL will certainly help you make a decision on the purchase.
If you already are a holder of Sioux Tools 5000AL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sioux Tools 5000AL.
However, one of the most important roles played by the user manual is to help in solving problems with Sioux Tools 5000AL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sioux Tools 5000AL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
