Instruction/ maintenance manual of the product 1238 Sioux Tools
Go to page of 2
1 Form A203B Date 2004August13/A Page 1 of 1 Printed in U.S.A. INSTRUCTIONS FOR SIOUX AIR SANDER & POLISHER NO. 1287NO. 1238 AIR SUPPLY The tool is designed to operate at approximately 90 pounds per square inch air pressure at the inlet to the 3/8 inch hose suppl ied with the tool.
This pdf incorporates the f ollowing model numbers: 1238L.
An important point after buying a device Sioux Tools 1238 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sioux Tools 1238 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sioux Tools 1238 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sioux Tools 1238 you will learn all the available features of the product, as well as information on its operation. The information that you get Sioux Tools 1238 will certainly help you make a decision on the purchase.
If you already are a holder of Sioux Tools 1238, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sioux Tools 1238.
However, one of the most important roles played by the user manual is to help in solving problems with Sioux Tools 1238. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sioux Tools 1238 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
