Instruction/ maintenance manual of the product Q87-E Axis Communications
Go to page of 12
INSTALLATION GUIDE ENGLISH AXIS Q87-E Power Supply 230 V AC AXIS Q87-E Power Supply 120 V AC.
Electromagnetic Compatibility (E MC) This equipment has b een designed and tested to fulfill applicable standards f or: • Radio frequ ency emission when installe d accor ding to the instructions and used in its intended envir onment.
ENGLISH Safeguards Please read through this Installation Guide ca refully before installing the product. Keep the Installation Guide for further reference.
.
AXIS Q87-E 230/120 V AC Installation Guide Page 5 ENGLISH AXIS Q87-E Power Supply 230 V AC & AXIS Q87-E Power Supply 120 V AC Installation Guide This Installation Guide provides instructions for connecting AXIS Q87-E Power Supply 230/120 V AC with AXIS Q87-E Dual PT Z Network Camera Series .
Page 6 AXIS Q87- E 230/120 V AC Installation Guide Hardware Overview 1 2 4 5 3 6 7 8 1 Power supply lid 5 Cable gland (illuminator cable) 2 Power supply lid screw (4x) 6 Power supply box 3 Cable gland.
AXIS Q87-E 230/120 V AC Installation Guide Page 7 ENGLISH Install the Power Supply The mains supply shall be disconnected during installation. The supplied power supply shall be used. Using any other power supply will void the warranty and could leave the unit at a risk.
Page 8 AXIS Q87- E 230/120 V AC Installation Guide 4. Connect the pan/tilt power supply to the pan/tilt connector (6) in the power supply. 5. If using the day/night sensor, connect the illumin ator cable to the illuminator connector (J5) in the power supply.
AXIS Q87-E 230/120 V AC Installation Guide Page 9 ENGLISH Connection Diagram Cable Specification Notes: • To maintain the products IP rating, the exter nal diameter of the cables must be 5 - 10 mm. • The Pan/tilt power supply cable can not be longer than 3 m (9 ft).
Day/Night Sensor The day/night sensor is configured in the factor y for optimal performance in a range of conditions. However, settings can be adjusted to suit specific conditions on site. To adjust the sensitivity of the day/night sensor, turn the potentiometer until it reaches the desired threshold.
.
Installation Guide Ver.2 .0 AXIS Q87-E 230/120 V AC Printed: April 2014 © Axis Communicat ions AB, 2013-20 14 Part No. 57182.
An important point after buying a device Axis Communications Q87-E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Communications Q87-E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Communications Q87-E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Communications Q87-E you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Communications Q87-E will certainly help you make a decision on the purchase.
If you already are a holder of Axis Communications Q87-E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Communications Q87-E.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Communications Q87-E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Communications Q87-E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
