Instruction/ maintenance manual of the product Q2901-E Axis Communications
Go to page of 67
AXIS Q290 1-E T emperature Alarm Camera User Manual.
About this Document This manual is intended for administrators and users of AXIS Q290 1-E Temperature Alarm Camera, and is applicable to rmware 5.55 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product.
있 습 니 다 . 적 절히 접 지 된 STP (shielded twisted pair) 케 이 블 을 사 용 하 여 제 품 을 연 결 하 십 시 오 . Safety This product complies with IEC/EN/UL 60950-1 and IEC/EN/UL 60950-22, Safety of Information Technology Equipment.
AXIS Q2901-E T emperature Alar m Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS Q2901-E T emperature Alar m Camera T able of Contents Check the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS Q2901-E T emperature Alar m Camera Hardware Overview Hardware Overview 4 5 6 3 2 1 7 8 1 P ower connector 2 I/O and audio terminal connector 3 Network connector 4 Status indicator LED 5 MicroSD memory card slot 6 Control button 7 Foot 8 Mounting bracket Connectors and Buttons For technical specications, see page 63 .
AXIS Q2901-E T emperature Alar m Camera Hardware Overview • Input/Output (I/O) devices When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP rating. For more information, see Multi-Connector Cable (sold separately) on page 58 .
AXIS Q2901-E T emperature Alar m Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product.
AXIS Q2901-E T emperature Alar m Camera Access the Product Set the Root P assword To access the Axis product, you must set the password for the default administrator user root . This is done in the Congure Root P assword dialog, which opens when the product is accessed for the rst time.
AXIS Q2901-E T emperature Alar m Camera Access the Product The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audio clip and click the Play button. The product’s heater is controlled by the ambient temperature and is turned on and off automatically .
AXIS Q2901-E T emperature Alar m Camera Access the Product Speaker button — Click to turn the speakers on or off. Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode , the Microphone and T alk buttons must both be active to send audio to the Axis product.
AXIS Q2901-E T emperature Alar m Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.
AXIS Q2901-E T emperature Alar m Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically installed on rst use, after which it can be congured.
AXIS Q2901-E T emperature Alar m Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.
AXIS Q2901-E T emperature Alar m Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.
AXIS Q2901-E T emperature Alar m Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 16 . • Stream proles. See page 17 .
AXIS Q2901-E T emperature Alar m Camera Video and Audio • Overlay settings . See Overlay on page 18 . Click Save to apply the new settings. H.264 H.264, also known as MPEG-4 P art 1 0/AVC, is a video compression standard that provides high quality video streams at low bit rates.
AXIS Q2901-E T emperature Alar m Camera Video and Audio For quick setup, use one of the predened stream proles. Each predened prole has a descriptive name, indicating its purpose. If required, the predened stream proles can be modied and new customized stream proles can be created.
AXIS Q2901-E T emperature Alar m Camera Video and Audio Overlay Image An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is used to provide extra information or to mask a part of the image.
AXIS Q2901-E T emperature Alar m Camera Video and Audio 2. Under Overlay Settings , select Include text . 3. Enter the modier #D and, optionally , additional text which will be displayed also when the action rule is not active. Create the action rule: 1.
AXIS Q2901-E T emperature Alar m Camera Video and Audio Simplex — Network Camera microphone only - Audio captured by the product microphone is transmitted from the Axis product to one or more clients. To set the audio mode, go to Video & Audio > Audio Settings and select the desired mode from the Audio mode drop-down list.
AXIS Q2901-E T emperature Alar m Camera Video and Audio Audio Clips An audio clip is a sound le that can be played when events occur or directly from the Live View page. The audio clip must rst be uploaded to the Axis product or recorded by a microphone connected to the product.
AXIS Q2901-E T emperature Alar m Camera Ther mal Settings Ther mal Settings The thermal settings can be used to congure isothermal settings and set the temperature scale.
AXIS Q2901-E T emperature Alar m Camera Ther mal Settings a b c d e f g 28˚C 25˚C 22˚C 28˚C 25˚C 22˚C 28˚C 25˚C 22˚C 28˚C 25˚C 22˚C 28˚C 25˚C 2 2 ˚ C 28˚C 2 5 ˚ C 2 2˚C 28˚C 25˚C 2.
AXIS Q2901-E T emperature Alar m Camera Ther mal Settings Temperature Scale Temperature data can be displayed in either Celsius or Fahrenheit. Select the temperature unit and click Save to apply the setting. The Axis product can automatically convert all temperature values that you have entered into the selected temperature scale.
AXIS Q2901-E T emperature Alar m Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole.
AXIS Q2901-E T emperature Alar m Camera Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved to the location specied in the AMC Control P anel.
AXIS Q2901-E T emperature Alar m Camera Detectors Detectors Temperature Detection Temperature detection is used to generate an alarm whenever the temperature changes according to dened conditions: .
AXIS Q2901-E T emperature Alar m Camera Detectors - Below (B) : T riggers if the temperature falls below the level (C) that you have set in the Detection T emperature eld. By default, minimum temperature in the zone is used as the base for temperature detection.
AXIS Q2901-E T emperature Alar m Camera Detectors - + - + - + E D D D D D F F D F F D F D t 0 t 1 t 2 t 3 t 4 G G G G G D: Actual temperature increase in the zone E: T emperature in the zone F: Y our .
AXIS Q2901-E T emperature Alar m Camera Detectors 6. For detection type Increase : Enter the increase rate (F) in degrees per seconds in the Increase rate elds. - The Y-axis : the degrees in Celsius or Fahrenheit - The X-axis : the increase time in seconds - + F 7.
AXIS Q2901-E T emperature Alar m Camera Detectors - + 000 000 000 000 000 000 0 0 A C B D D t 0 t 1 t 2 t 3 t 4 4. If detection type Above (A) or Below (B) is selected: Enter a Delay Time (D) in seconds. Note Alarms are triggered after the Delay time (D) has elapsed.
AXIS Q2901-E T emperature Alar m Camera Detectors Material Emissivity Asphalt 0.93 Charcoal 0.96 Cloth 0.95 Concrete 0.94 Foodstuff 0.80-0.90 Graphite 0.97 Metals (unoxidized) <0.1 0 Oil paint (value may vary depending on paint types) 0.92-0.96 P aints (value may vary depending on color) 0.
AXIS Q2901-E T emperature Alar m Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window .
AXIS Q2901-E T emperature Alar m Camera Detectors 2. Set the audio alarm level and click Save. 3. Go to Events > Action Rules and set up an action rule, see Set Up Action Rules on page 38 . Detected audio is indicated by colored peaks in the Activity indicator .
AXIS Q2901-E T emperature Alar m Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting.
AXIS Q2901-E T emperature Alar m Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . AXIS Video Motion Detection The application AXIS Video Motion Detection is included in this product.
AXIS Q2901-E T emperature Alar m Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected.
AXIS Q2901-E T emperature Alar m Camera Events - Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notications. - Motion Detection – T rigger the rule when motion is detected.
AXIS Q2901-E T emperature Alar m Camera Events • Output P ort – Activate an I/O port to control an external device. • Overlay T ext – Display an overlay text. See Use Overlay T ext in an Action Rule on page 19 . • Play Audio Clip – See Audio Clips on page 22 .
AXIS Q2901-E T emperature Alar m Camera Events address, port and authentication method. Optionally , select Use encryption to send emails over an encrypted connection. The server certicate can be validated using the certicates available in the Axis product.
AXIS Q2901-E T emperature Alar m Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 42 . • To set up action rules, see page 38 .
AXIS Q2901-E T emperature Alar m Camera Recordings 5. Click Save to save and start the recording. 43.
AXIS Q2901-E T emperature Alar m Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le.
AXIS Q2901-E T emperature Alar m Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords.
AXIS Q2901-E T emperature Alar m Camera System Options 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups.
AXIS Q2901-E T emperature Alar m Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1.
AXIS Q2901-E T emperature Alar m Camera System Options Network Basic T CP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled.
AXIS Q2901-E T emperature Alar m Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.
AXIS Q2901-E T emperature Alar m Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons.
AXIS Q2901-E T emperature Alar m Camera System Options Note • For NAT traversal to work, this must be supported by the router . The router must also support UPnP TM .
AXIS Q2901-E T emperature Alar m Camera System Options SMTP (email) To send email messages from the Axis product via SMTP (Simple Mail Transfer Protocol), an SMTP mail server must be set up. This is done under System Options > Network > SMTP (email) .
AXIS Q2901-E T emperature Alar m Camera System Options Bonjour The Axis product includes support for Bonjour . Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol. Bonjour can be disabled under System Options > Network > Bonjour .
AXIS Q2901-E T emperature Alar m Camera System Options The Axis product can be congured to automatically format SD cards that are inserted into the product. If autoformat is enabled and an SD card is inserted, the product will check if the SD card has the ext4 le system.
AXIS Q2901-E T emperature Alar m Camera System Options P orts & Devices I/O P orts P ort Status The list on the System Options > P orts & Devices > Port Status page shows the status of the product’s input and output ports. Maintenance The Axis product provides several maintenance functions.
AXIS Q2901-E T emperature Alar m Camera System Options Logs & Reports The System Options > Support > Logs & Reports page generates logs and reports useful for system analysis and troubleshooting. If contacting Axis Support, please provide a valid Server Report with your query .
AXIS Q2901-E T emperature Alar m Camera System Options Reset to Factory Default Settings Important Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values.
AXIS Q2901-E T emperature Alar m Camera Multi-Connector Cable (sold separately) Multi-Connector Cable (sold separately) When connecting external equipment to the Axis product, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP rating.
AXIS Q2901-E T emperature Alar m Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version.
AXIS Q2901-E T emperature Alar m Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .
AXIS Q2901-E T emperature Alar m Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer .
AXIS Q2901-E T emperature Alar m Camera Troubleshooting P oor audio quality Stuttering Reduce the number of listeners and viewers. Decrease image resolution and compression. Unsynchronized audio and video using H.264 Synchronize the product’s date and time settings with an NTP server .
AXIS Q2901-E T emperature Alar m Camera T echnical Specifications T echnical Specifications Function/group Item Specications Model AXIS Q290 1–E Image sensor Uncooled Micro bolometer 336x256 pixels, pixel size 17 µm Spectral range: 8-14 µm Lens 9 mm: f 1.
AXIS Q2901-E T emperature Alar m Camera T echnical Specifications Function/group Item Specications Security P assword protection, IP address ltering, IEEE 802.1X* network access control, HTTPS* encryption, digest authentication, user access log, centralized certicate management.
AXIS Q2901-E T emperature Alar m Camera T echnical Specifications Function/group Item Specications Operating conditions Temperature: -40 ºC to 60 ºC (-40 ºF to 140 ºF) Humidity: 1 0-85% RH (co.
AXIS Q2901-E T emperature Alar m Camera T echnical Specifications Connectors P ower Connector 2-pin terminal block for power input. Use a Safety Extra Low V oltage (SELV) compliant limited power source (LPS) with either a rated output power limited to ≤ 100 W or a rated output current limited to ≤ 5 A.
User Manual V er . M1.13 AXIS Q2901-E T emperature Alarm Camera Date: February 20 15 © Axis Communications AB, 20 14 P art No. 60635.
An important point after buying a device Axis Communications Q2901-E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Communications Q2901-E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Communications Q2901-E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Communications Q2901-E you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Communications Q2901-E will certainly help you make a decision on the purchase.
If you already are a holder of Axis Communications Q2901-E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Communications Q2901-E.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Communications Q2901-E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Communications Q2901-E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
