Instruction/ maintenance manual of the product PS-24 Axis Communications
Go to page of 16
ENGLISH DEUTSCH PS-24 Mains Adaptor Installation Guide.
.
PS-24 Mains Adaptor ENGLISH Mount the PS-24 box usin g the supplied holders Package contents: a) 4 holders b) 4 wood screws c) 4 screws for holders d) 4 concrete plugs (5mm drill) e) 4 concrete screws Using the supplied scre ws (c), attach the plastic holders (a) to the PS-24 box.
PS-24 Mains Adaptor Alternative installation - PSU box The vandal-proof PSU box is an optional acce ssory which can be mounted either on a pole or on a flat surface. 1. Remove the top lid of the PSU box by removing the 4 screws. 2. Place the PS-24 with the 4 cable glands in the opening at the bottom of the PSU box.
PS-24 Mains Adaptor ENGLISH PS-24 Mains Power Adaptor Important! • Warning - high voltage. Read through the instructions be fore starting the installation. The electrical connection should be made by an authorized el ectrician. Please observe relevant na tional and local regulations for the installation.
PS-24 Mains Adaptor Connect power to the PS-24 1. Remove the lid of the power su pply by removing the 4 screws. 2. Make sure the power switch is set to ‘0’ (off) . Important! The power switch does not break on both poles at the AC input. The power switch shall only be used to turn the camera on/off.
PS-24 Mains Adaptor ENGLISH Connect the AXIS 231D/232D po wer and alarm inputs/outputs This document describes how to install the AX IS 231D/232D and the PS-24.
PS-24 Mains Adaptor Connect the AXIS 225FD po wer and alarm input/output This document describes how to install the AXIS 225FD and the PS-24. Please refer to the AXIS 225FD Installation Guide for further instructions. Connect the camera to the power supply and al arm input/output* (cab les not supplied).
PS-24-Versorgungsnetzteil DEUTSCH Verwenden Sie zur Montage des PS-2 4-Gehäuses die mitgelieferten Halterungen Lieferumfang: a) 4 Halterungen b) 4 Holzschrauben c) 4 Schrauben für Halterungen d) 4 Betondübel (5-mm-Bohrer) e) 4 Betonschraub en Befestigen Sie die Halterungen (a) mit den vorgesehenen Schrauben (c) am PS-24-Gehäuse.
PS-24-Versorgungsnetzteil Alternative Installation – PSU-Gehäuse Das zerstörungssichere PSU-Gehäuse (optionales Zubehör) kann auf glatten Oberflächen und an Masten montie rt werden. 1. Lösen Sie zum Öff nen des PSU-Gehäuses die 4 Befestigungsschrauben.
PS-24-Versorgungsnetzteil DEUTSCH PS-24-Versorgungsnetzteil Wichtig! • Achtung! Hochspannung! Lesen Sie die Bedienungsanleitung, bevor Sie mit der Montage beginnen. Elekt roarbeiten müssen von einem ausgebildeten Elektriker ausgeführt werden. Be achten Sie bei der Montage die geltenden regionalen und nationalen Gesetze und Richtlinien.
PS-24-Versorgungsnetzteil PS-24 an das Stromnetz anschließen 1. Lösen Sie zum Öffnen der Gehäusek lappe die 4 Befest igungssc hrauben. 2. Schalten Sie den Netzscha lte r auf ‚0‘ (Aus) . Wichtig! Der Netzschalter unterbricht nicht beide Pole de s Wechselstromeingangs.
PS-24-Versorgungsnetzteil DEUTSCH Versorgungs- und Signalleitungen für AXIS 231D/232D anschließen In diesem Dokument wird die Montag e der Modelle AXIS 231D/232D und PS-24 beschrieben. Weitere Hinweise finden Sie in der Installationsanleitung zu AXIS 231D/232D.
PS-24-Versorgungsnetzteil Versorgungs- und Signalleitungen für AXIS 225FD anschließen In diesem Dokument wird die Montage der Modelle AXIS 225FD und PS-24 beschrieben.
.
AXIS COMMUNICATIONS <Product Name> Quick U ser’s Guide PS-24 Power Supply Installation Guide Rev. 2.10 Part No. 26537.
An important point after buying a device Axis Communications PS-24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Communications PS-24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Communications PS-24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Communications PS-24 you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Communications PS-24 will certainly help you make a decision on the purchase.
If you already are a holder of Axis Communications PS-24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Communications PS-24.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Communications PS-24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Communications PS-24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center