Instruction/ maintenance manual of the product P5522 Axis Communications
Go to page of 66
AXIS P5522 PTZ Dome Network Camera User Manual.
About this document This manual is intended for administrators and users of the AXIS P5522 PTZ Dome Network Camera, and is applicable to rmware 5.50 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product.
The power supply used with this product shall fulll the requirements for Safety Extra Low V oltage (SEL V) and Limited P ower Source (LPS) according to IEC/EN/UL 60950-1. Battery The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RT C).
AXIS P5522 PTZ Dome Network Camera T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS P5522 PTZ Dome Network Camera T able of Contents Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS P5522 PTZ Dome Network Camera Safety Infor mation Safety Infor mation Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury .
AXIS P5522 PTZ Dome Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 6 7 1 P art number (P/N) & Serial number (S/N) 2 Network connector (High P oE) 3 Multi-connector 4 Control button 5.
AXIS P5522 PTZ Dome Network Camera Hardware Overview 2 3 4 5 1 1 Screws 2 Dome ring 3 Dome cover 4 T op cover 5 Sealing ring Connectors and Buttons For technical specications, see page 63 . Network Connector RJ45 with High P ower over Ethernet (High P oE).
AXIS P5522 PTZ Dome Network Camera Hardware Overview When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s NEMA/IP rating. For more information, see Multi-Connector Cable (sold separately) on page 57 .
AXIS P5522 PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product.
AXIS P5522 PTZ Dome Network Camera Access the Product Set the Root P assword To access the Axis product, you must set the password for the default administrator user root . This is done in the Congure Root P assword dialog, which opens when the product is accessed for the rst time.
AXIS P5522 PTZ Dome Network Camera Access the Product The Manual T rigger button is used to trigger an action rule from the Live View page. For information about how to congure and enable the button, see Manual Trigger on page 12 . Click Snapshot to save a snapshot of the video image.
AXIS P5522 PTZ Dome Network Camera Access the Product Click the View Full Screen button and the video image will ll the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view . The Record button is used to record the current video stream on your computer .
AXIS P5522 PTZ Dome Network Camera Access the Product P an and Tilt bars – Use the arrows to pan and tilt the camera view , or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.
AXIS P5522 PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.
AXIS P5522 PTZ Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured.
AXIS P5522 PTZ Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this.
AXIS P5522 PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.
AXIS P5522 PTZ Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 19 . • Stream proles. See page 20 .
AXIS P5522 PTZ Dome Network Camera Video and Audio • Maximum frame rate . T o avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a xed amount. Alternatively , the frame rate can be set as Unlimited , which means the Axis product always delivers the highest frame rate possible under the current conditions.
AXIS P5522 PTZ Dome Network Camera Video and Audio For quick setup, use one of the predened stream proles. Each predened prole has a descriptive name, indicating its purpose. If required, the predened stream proles can be modied and new customized stream proles can be created.
AXIS P5522 PTZ Dome Network Camera Video and Audio Iris - A larger F-value means less light sensitivity , but a larger depth of eld. Gain - Measured in decibels (dB), gain describes the amount of amplication applied to a signal, in this case the visual information in the image.
AXIS P5522 PTZ Dome Network Camera Video and Audio Overlay Image An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is used to provide extra information or to mask a part of the image.
AXIS P5522 PTZ Dome Network Camera Video and Audio 1. Go to Video & Audio > Video Stream and select the Image tab . 2. Under Overlay Settings , select Include text . 3. Enter the modier #D and, optionally , additional text which will be displayed also when the action rule is not active.
AXIS P5522 PTZ Dome Network Camera Video and Audio Full duplex - Simultaneous two-way audio allowing the Axis product to transmit and receive audio at the same time. There is no echo cancellation; if feedback loops appear , try moving the microphone or the speaker .
AXIS P5522 PTZ Dome Network Camera Video and Audio • G726 is an unlicensed speech codec that is most commonly used within the security industry . Note If recording audio to edge storage, such as an SD card or network share, use AAC encoding. The Sample rate denes the number of times per second the sound is sampled.
AXIS P5522 PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole.
AXIS P5522 PTZ Dome Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page.
AXIS P5522 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position.
AXIS P5522 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) It is also possible to, for example, record video or save images (take a snapshot) while the Gatekeeper is active.
AXIS P5522 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) x Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed. When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.
AXIS P5522 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement. Control Queue Note • The administrator can enable and disable PTZ controls for selected users.
AXIS P5522 PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement starts or stops in the camera view .
AXIS P5522 PTZ Dome Network Camera Detectors Medium level (50%) A large difference in luminance is required to trigger motion detection. Low level (0%) Even very small objects trigger motion detection. An object that appears in the window triggers motion detection only for a very short time before it is considered as non-moving.
AXIS P5522 PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting.
AXIS P5522 PTZ Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed.
AXIS P5522 PTZ Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected.
AXIS P5522 PTZ Dome Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 35 . • Detectors - Audio Detection – T rigger the rule when audio is detected.
AXIS P5522 PTZ Dome Network Camera Events • Play Audio Clip – See Audio Clips on page 26 . • PTZ Control - Preset P osition – Go to a preset position. - Guard T our – Start a guard tour . See Guard T our on page 30 . • Record Video – Record video and audio to a selected storage.
AXIS P5522 PTZ Dome Network Camera Events HTTPS Send Images Send Notication Send Video Clip Encrypted le transfer using HyperText Transfer Protocol Secure (HTTPS). Specify login information for the HTTPS server and validate the server’s certicate.
AXIS P5522 PTZ Dome Network Camera Events Set Up Recurrences Recurrences are used to trigger action rules repeatedly , for example every 5 minutes or every hour . To set up a recurrence: 1. Go to Events > Recurrences and click Add . 2. Enter a descriptive name and recurrence pattern.
AXIS P5522 PTZ Dome Network Camera Recordings Recordings • To access recordings, see Recording List on page 42 . • To congure camera controlled storage, see Storage on page 52 . Recording List Recorded videos are listed on the Recordings > List page.
AXIS P5522 PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le.
AXIS P5522 PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords.
AXIS P5522 PTZ Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups.
AXIS P5522 PTZ Dome Network Camera System Options A Server/Client certicate can be self-signed or issued by a Certicate Authority (CA). A self-signed certicate offers limited protection and can be used before a CA-issued certicate has been obtained.
AXIS P5522 PTZ Dome Network Camera System Options Network Basic T CP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled.
AXIS P5522 PTZ Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.
AXIS P5522 PTZ Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the rst part of a fully qualied domain name, for example, myserver is the host name in the fully qualied domain name myserver.
AXIS P5522 PTZ Dome Network Camera System Options Note • For NAT traversal to work, this must be supported by the router . The router must also support UPnP TM .
AXIS P5522 PTZ Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP . Community names are used to identify groups.
AXIS P5522 PTZ Dome Network Camera System Options Storage SD Card NO NO NO TICE TICE TICE To prevent data corruption, the SD card should always be unmounted before it is ejected. Note For SD card recommendations see www .axis.com The Axis product supports SD cards with up to 64 GB of storage.
AXIS P5522 PTZ Dome Network Camera System Options 1. Insert the SD card in the SD card slot. 2. Open the Axis product’s webpages and go to Setup > System Options > Storage . 3. Click SD Card . 4. Click Format and select the desired le system.
AXIS P5522 PTZ Dome Network Camera System Options Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. Note A restart clears all entries in the Server Report. Click Restore to reset most settings to the factory default values.
AXIS P5522 PTZ Dome Network Camera System Options Crash Report - Generates an archive with debugging information. The report takes several minutes to generate. The log levels for the System Log and the Access Log are set under System Options > Support > Logs & Reports > Conguration .
AXIS P5522 PTZ Dome Network Camera System Options 4. Using the installation and management software tools, assign an IP address, set the password and access the video stream It is also possible to reset parameters to factory default via the web interface.
AXIS P5522 PTZ Dome Network Camera Multi-Connector Cable (sold separately) Multi-Connector Cable (sold separately) When connecting external equipment to the Axis product, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP rating.
AXIS P5522 PTZ Dome Network Camera Multi-Connector Cable (sold separately) B I/O congured as output I/O connector 1 2 3 4 5 6 DC power input AC power input 58.
AXIS P5522 PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version.
AXIS P5522 PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .
AXIS P5522 PTZ Dome Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer .
AXIS P5522 PTZ Dome Network Camera Troubleshooting No audio Incorrect setup Check the sound card in the computer . Ensure that mute is not selected and that the volume settings are correct. Check that Enable audio support is selected under Setup > System Options > Security > Audio Support .
AXIS P5522 PTZ Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P5522 50 Hz AXIS P5522 60 Hz Image sensor 1/4'‘ ExView HAD progressive scan CCD Lens Varifocal f=4.1 – 73.
AXIS P5522 PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Security P assword protection, IP address ltering, HTTPS encryption*, IEEE 802.
AXIS P5522 PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Approvals EN 55022 Class A, EN 6 1 000–3–2, EN 6 1 000–3–3, EN 6 1 000–6–1, EN 6 1 000–6.
User Manual V er . M5.2 AXIS P5522 PTZ Dome Network Camera Date: January 20 15 © Axis Communications AB, 20 15 P art No. 619 14.
An important point after buying a device Axis Communications P5522 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Communications P5522 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Communications P5522 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Communications P5522 you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Communications P5522 will certainly help you make a decision on the purchase.
If you already are a holder of Axis Communications P5522, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Communications P5522.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Communications P5522. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Communications P5522 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
