Instruction/ maintenance manual of the product Turbo Vacuum Collection System Simplicity
Go to page of 12
A TT A CHMENT OPERA T OR’S MANU AL Mfg. No. Description 1694497 Turbo Vacuum Collection System (for use with Legacy XL / 2000 / 2900 Series) 1726316-01 Rev 02/2004 TP 100-3923-01-AT-SMA T urbo V acu.
1 Attaching & Remo ving the T urbo V acuum Collector Attaching the T urbo..........................................8 Removing the T urbo ........................................8 Adjustments .....................................................9 Storage .
2 Read and obey all operation and warning decals. ROT A TING BLADES SHUT OFF MOWER AND TRACTOR BEFORE SERVICING OR CLEANING BLOWER AND MOWER. D ANGER 1700259 Safety Rules & Information Read these safety rules and follow them closely.
3 BEFORE OPERA TION Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, as the grass catcher is likely to become plugged.
4 Initial Setup & Assembly Figure 1. Deflector, Stone Guard, and Cover A. Deflector C. Belt Cover B. Spring D. Rod A B C D Figure 3. Install New Pulley A. Capscrew, 3/8 x 3-1/4 D. Spacer B. Thick Washer E. Lockwasher C. Pulley Assembly F. Hex Nut A B C D E F Figure 2.
5 Initial Setup & Assembly Assemble & Install Ne w Belt Cover 1. Assemble the pulley cover (G, Figure 4) to the new belt cover. Using 10-32 x 3/8 machine screws and #10-32 nut-washer assemblies. The screws must be inserted from inside the belt cover so that nuts (D) are outside.
6 Initial Setup & Assembly Assemble & Install Deflector 1. The two holes for mounting the deflector must be drilled out. Turn the deflector over, and notice that these two holes are started. Finishing drilling the two 11/32 inch holes (See Figure 5).
7 Initial Setup & Assembly Assemble T urbo 1. Assemble the turbo. Install the bracket (A, Figure 6) and upstop (B) as follows: NOTE: Upstop (B. Figure 6) has a short and a long leg. The difference is the thickness of bracket (A). Place long leg on housing and short leg on top of bracket.
8 Attaching & Removing the T urbo V acuum Collector W ARNING To operate without the collection system, the blower assembly MUST be removed and the deflector MUST be in the down position.
ADJUSTMENTS Pulley Adjustments If the mower deck belt has stretched over time, the stacked idler pulley (B, Figure 11) may need to be moved to the outer hole in the mower deck to take up the belt slack.
10.
MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 2004 Simplicity Manufacturing, Inc.
An important point after buying a device Simplicity Turbo Vacuum Collection System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity Turbo Vacuum Collection System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity Turbo Vacuum Collection System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity Turbo Vacuum Collection System you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity Turbo Vacuum Collection System will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity Turbo Vacuum Collection System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity Turbo Vacuum Collection System.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity Turbo Vacuum Collection System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity Turbo Vacuum Collection System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
