Instruction/ maintenance manual of the product Turbo Turbo Wide Body Cart & Hitch Simplicity
Go to page of 18
A TT ACHMENT OPERA T OR’S MANUAL Mfg. No. Description 1691526 Turbo Wide Body Cart & Hitch (for SunStar / 1900 / 2900 Series & Sovereign / 900 / 2800 Series) 1692526 Turbo Wide Body Cart &am.
MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 1997 Simplicity Manufacturing, Inc.
T ABLE OF CONTENTS SPECIFICATIONS ........................................................1 ILLUSTRATIONS & PART LISTS ................................2 Wide Body Dump Cart .......................................................2 Tube Assembly (SunStar & Sovereign) .
Figure 1. Wide Body Dump Cart 2 Illustrations & Part Lists No. Qty. Description 1 1 COVER 2 1 ROD, Straight 3 2 CLIP, Safety, Hairpin 4 1 SLEEVE, Plastic, Connecting 5 1 CLAMP, Sleeve 6 1 TUBE, Su.
3 Illustrations & Part Lists Figure 3. Sunstar Hitch No. Qty. Description 1 4 Capscrew, Hex Hd., 7/16-14 x 1-1/2 2 4 Lockwasher, 7/16 3 4 Nut, Hex, Full, 7/16 4 2 Nut, Hex, Full, 1/2-13 5 2 Lockwasher, 1/2 6 1 Bracket, Hitch (Frame) 7 2 Nut, Hex, Full, 5/8 8 2 Lockwasher, 5/8 9 2 Bracket, Hitch (Cart) 10 2 Capscrew, Hex Hd.
Figure 6. Hitch Assembly - Landlord A. Hitch Bracket B. Hitch Support C. Capscrew, 3/8-16 x 1 D. Locknut, 3/8-16 E. Backside Drawbar F. Flat washer, 1/2 G. Capscrew, 1/2-13 x 1-1/4 H. Locknut, 1/2-13 4 Illustrations & Part Lists Figure 5. Tube Assembly - Landlord & Broadmoor No.
5 Safety Rules SAFETY RULES 1. Know the tractor controls and how to stop quickly. READ THE TRACTOR'S OWNER'S MANUAL. 2. Shut the engine off before attaching, adjusting, or dis- connecting the Collection System. 3. Check the cart to make sure it is attached tightly to tractor.
6 Cart Assembly CART ASSEMBL Y 1. Install the wheel assemblies (A, Figure 8) to the frame (B). Place the head of the swivel wheel on the end of the frame. Align the holes and place four 3/8- 16 x 1 hex bolts up through the frame and head of the swivel.
7 Cover Assembly 5. Install support tube (A, Figure 12) inside the box. Align each end of the support tube with the two holes at the front corner side of the box. Place one 5/16-18 x 1-1/2 hex bolt with a 5/16 flat washer and plastic spacer through the top, outside hole of the box and the support tube.
8 Cover Assembly 6. Install the sleeve clamp (C, Figure 17) to the connect- ing sleeve (A) with 1/4-20 x 1/2 slotted truss head screw (D) and nyloc nut (E). Install the connecting sleeve inside the collar of the cover and position sleeve clamp (C) over the support tube (B).
9 Hitch Installation Figure 22. Sunstar Hitch Installation A. U-Bracket D. Bracket B. Capscrew, 1/2-13 x 1-1/4 E. Large Hole C. Capscrew, 7/16-14 x 1/2 F. Capscrew, 7/16-14 x 1/2 Figure 23. Sovereign Hitch Installation A. Locknut, 1/2-13 F. Support Bracket B.
10 Hitch Installation Figure 26. Discharge Tube Installation A. Upper Tube B. Middle Tube C. Lower Tube D. Spring Clip E. Truss Head Screw, 10/32 x 1/2 F. Washer G. Locknut, 10/32 H. Carriage Bolt, 1/4-20, 5/8 I. Flange Locknut, 1/4-20 Broadmoor/1600 Series (Mfg.
11 Discharge T ube Installation DISCHARGE TUBE INST ALLA TION Landlord/1700 Series (Mfg. No. 1692526) Broadmoor/1600 Series (Mfg. No. 1692526) 1. Install the spring clip (D, Figure 26) with two 10/32 x 1/2 truss head screws (E), four flat washers (F), and two locknuts (G).
12 Connecting Cart / Maintenance Figure 28. Connecting Cart To Tractor A. Cart Frame C. Spring Clip B. Clevis Pin CONNECTING CART T O TRACT OR Place the cart frame (A, Figure 28) onto tractor brackets and install the clevis pins (B) and springs clips (C).
13 Operation Figure 30. Emptying the Cart CAUTION The maximum weight capacity of the cart is 400 lbs. Do not exceed. OPERA TION Before Operation Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades.
14 Operation Operating Without Collection System 1. Unhook the cart from the tractor by removing two cle- vis pins and spring clips (Figure 28). 2. To remove the blower, remove the belt from the pul- ley (A, Figure 31). 3. Close cover (D) and tighten knob.
T orque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.
16 Notes.
An important point after buying a device Simplicity Turbo Turbo Wide Body Cart & Hitch (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity Turbo Turbo Wide Body Cart & Hitch yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity Turbo Turbo Wide Body Cart & Hitch - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity Turbo Turbo Wide Body Cart & Hitch you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity Turbo Turbo Wide Body Cart & Hitch will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity Turbo Turbo Wide Body Cart & Hitch, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity Turbo Turbo Wide Body Cart & Hitch.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity Turbo Turbo Wide Body Cart & Hitch. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity Turbo Turbo Wide Body Cart & Hitch along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
