Instruction/ maintenance manual of the product Snapper LBC6151BV Simplicity
Go to page of 16
ASSEMBLY INSTRUCTIONS OPERATOR’S MANUAL PARTS LIST Manual No. 7078079 (I.R. - 09/21/ 04) Classic Series Walk-Behind Leaf Blower Series 1 Actual product may differ slightl y from product pictured abo.
1 preliminaries Congratulations! You have just purchased one of the finest pieces of out door power equipment on the market today. If properly cared for, your new blower will provide years of dependable service. Please read and follow this instruction manual carefully in order to get the most out of your new equipment.
2 safety rules regarding outdoor power equipment IMPORTANT! READ CAREFULLY THE FO LLOWING SAFETY RULES BEFORE ASSEMBLING OR OPERATING UNIT. TRAINING • Read, understand, and follow all instructions in the manual and on the unit before starting.
2 safety rules regarding outdoor power equipment (cont.) • Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles. • Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.
3 unit assembly Note: Please refer to Parts List for corr ect part identification and placement. FRONT WHEEL ASSEMBLY • Attach left and right caster brackets to caster wheel using 3/8-18 x 2-1/4 bolt and lock nut. Insert bolt through hole in bracket.
4 unit operation STARTING THE ENGINE IMPORTANT NOTE: The procedures outlined within this section are general guidelines, and are in no way meant to replace or supercede engine manufacturer’ s oper ating instructions. In order to obtain optimum performance from your engine, refer to your engine manual.
4 unit operation (cont.) STARTING THE ENGINE (cont.) • Bracing unit with one hand on the upper handle and a foot on the right rear tire, firmly grasp recoil handle and pull briskly.
4 unit operation (cont.) GENERAL RULES TO OBSERVE BEFORE AND DURING OPERATION: • Inspect your unit before each and every use. Check for wo rn, bent or broken components, loose fasteners, low or flat tires, etc., and repair or replace prior to operation.
5 maintenance BEFORE MAKING ANY ADJUSTMENTS, STOP ENGINE AND DISCONNECT SPARK PLUG WIRE TO PREVENT INADVERTENT STARTING OF UNIT. GENERAL: • Follow implicitly the engine manufacturer’s recommendations for maintenance. • Always keep your machine clean – especially the engine.
5 maintenance (cont.) BEFORE MAKING ANY ADJUSTMENTS, STOP ENGINE AND DISCONNECT SPARK PLUG WIRE TO PREVENT INADVERTENT STARTING OF UNIT. TROUBLESHOOTING: • UNIT WILL NOT START: • Check fuel and oil levels. • Check to make sure choke is se t when engine is cold, off when hot.
6 decal identification 75893 – EAR/NOSE/BREATHING PROTECTION REQUIRED – LOCATED ON SIDE OF BLOWER HOUSING 33874 – DANGER – FLYING MATERIAL – LOCATED ON SIDE OF BLOWER HOUSING 13010 – DANGE.
7 illustrated parts list 33 LBC6151BV.
7 illustrated parts list (cont’d) Item Part No. Qty Description 1 3010003 1 WELDMENT, Base & Housing 52 Classic 2 3021506 1 WELDMENT, Impeller Steel 4 Blade 15.
7 illustrated parts list (cont’d) Item Part No. Qty Description 42 90391 4 WASHER, 5/16" Internal Tooth Lock 43 3071776 4 KNOB, Folding Handle 44 46465 1 GUIDE, Rope 45 90372 1 NUT, 1/4-20 Hex .
NOTES __________________________________________________________________________ __________________________________________________________________________ ____________________________________________.
Manual No. 7078079 (I.R. - 09/21/ 04) McDonough, GA 30253 USA Classic Series Walk-Behind Leaf Blower Series 1.
An important point after buying a device Simplicity Snapper LBC6151BV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity Snapper LBC6151BV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity Snapper LBC6151BV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity Snapper LBC6151BV you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity Snapper LBC6151BV will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity Snapper LBC6151BV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity Snapper LBC6151BV.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity Snapper LBC6151BV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity Snapper LBC6151BV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
