Instruction/ maintenance manual of the product M1025 Axis Communications
Go to page of 20
INSTALLATION GUIDE AXIS M1025 Network Camera.
About this Document This manual is intended for administrators and users of the AXIS M1025 Fi xed Dome Networ k Camera, and is applicable to firmware 5.4 and later. It includes instructions for using and managing the product on your network. Prev ious experience of networking will be of use when using this product.
Electromagnetic Compatibility (EMC), on page 3. • Low Voltage (LVD) Directive 2006/ 95/EC. See Safety, on page 4. • Restrictions of Hazardous Substances (RoHS) Direc tive 2011/65/ EU. See Disposal and Recycling, on page 4. A copy of the original de claration of conformity may be obtained from Axis Communications AB.
Safety This product complie s with IEC/EN/UL 60950-1, Safety of Information Tech nology Equipment. The power supply used with this product shall fulfill the requirements for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS) according to IEC/E N/UL 60950-1.
about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses s hould contact the product supplier for information about how to dispose of this product correctly.
could cause damage to the product. • Only use applicable tools when installing the Axis product; exces sive force could cause damage to the product. • Do not use chem icals, caus tic agents , or aerosol cleaners. Use a damp cloth for cleani ng. • Use only accessories that comply with technical specification of the product.
selbst zu reparieren. Wenden Sie sich bei Service- Angelegenhe iten an Axis oder an Ihre n Axis-Händl er. Verwenden Sie dieses Axis-Produkt unter Beachtun g der vor Ort geltenden rechtlichen Bestimmunge n. • Conservare il prodotto Axis in un ambiente asciutto e ben ventilato.
Dispose of used batteries accor ding to the manufactur er's instructions. Jetez les piles usagées conformément aux consignes du fabricant. Verbrauchte Batte rien sind gemä ß den Herstelleranweisun gen zu entsorgen. Smaltire le batterie usate secondo le istruzioni del produttore.
AXIS M1025 Page 9 1x 1x 4x 1x 4x 1x 1x 2x 1x 1x 1x 1x Camera owner authentication key The authentication key on this label is used to authenticate the owner/administrator of this Axis camera. The key is associated with the camera’s uniqu e serial number (S/N), as shown at the top of the label.
Page 10 AXIS M1025 www.axis.com/techsup.
AXIS M1025 Page 11 1 PoE IEEE 802.3af/802.3at T ype 1 Class1 Max 3.5 W.
Page 12 AXIS M1025 2 720p (HDMI) @ 30/25 fps.
AXIS M1025 Page 13 3 4 17.
Page 14 AXIS M1025 5 6.
AXIS M1025 Page 15 7.
Page 16 AXIS M1025 8.
AXIS M1025 Page 17 9 9 9 9.
.
.
Installation Guide Ver.1.3 AXIS M1025 Network Camera Printed: May 2014 © Axis Communications AB, 2014 Part No. 57737.
An important point after buying a device Axis Communications M1025 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Communications M1025 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Communications M1025 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Communications M1025 you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Communications M1025 will certainly help you make a decision on the purchase.
If you already are a holder of Axis Communications M1025, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Communications M1025.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Communications M1025. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Communications M1025 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
