Instruction/ maintenance manual of the product P-7 Simaudio
Go to page of 14
Owner’s Manual MOON Evolution Series P-7 Dual-Mono Preamplifier.
MOON P-7 Dual-Mono Preamplifier Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block ventilation openings.
MOON P-7 Dual-Mono Preamplifier Important Safety Instructions (cont’d) The lightning flash with the arrowhead symb ol, within an equilateral triangle, is intended to alert the user to the presence o.
MOON P-7 Dual-Mono Preamplifier Table of Contents Congratulations ................................................ 5 Unpacking ........................................................ 5 Introduction ....................................................
MOON P-7 Dual-Mono Preamplifier Congratulations! Thank you for selecting the MOON P-7 Dual-Mono preamplifier as a part of your music/cinema system. This preamplifier has been designed to offer state-of-the-art high-end performance in an elegant package, while reta ining all the sonic hallmarks on which Simaudio has made its reputation.
MOON P-7 Dual-Mono Preamplifier Introduction Your MOON P-7 dual-mon o preamplifier incorporates many significant design features to achieve its “world-class” level of performance.
MOON P-7 Dual-Mono Preamplifier Front Panel Controls Figure 1: Front panel of MOON P-7 dual-mono Preamplifier The front panel will look similar to Figure 1 (above). The large display win dow no rmally indicates the current volume level and, whenever you change the input, it will briefly show the selected input label.
MOON P-7 Dual-Mono Preamplifier Front Panel Controls (continued) The rotary “volume” control determines the gain setting, which ranges from ‘0.0dB’ (no output) to ’80.
MOON P-7 Dual-Mono Preamplifier Software Setup (continued) We will begin by walking through all 5 available options for the “B1” input: 1 To enter the Setup mode, begin by pressing the “Set up” button; “SETUP” will appe ar in the display window.
MOON P-7 Dual-Mono Preamplifier Software Setup (continued) The MOON P-7 is equipped with two 12 Volt trigger outputs. When an input is assigned to a 12 Volt trigger, the device connected to the trigger will automatically start-up whenever you switch to that inpu t.
MOON P-7 Dual-Mono Preamplifier Rear Panel Connections Figure 2: Rear panel of MOON P-7 Pr eamplifier The rear panel of the MOON P-7 dual-mono preamplifier will look similar to Figu re 2 (above).
MOON P-7 Dual-Mono Preamplifier SimLink ™ The SimLink™ provides communication features between various MOON components. For example, if you were to connect the SuperNova to the P-7 Preamplifier vi.
MOON P-7 Dual-Mono Preamplifier Balanced Operation When using an unbalanced interconnect, the audio signal runs th ro ugh both the center wire and the shield/ground wire.
MOON P-7 Dual-Mono Preamplifier Specifications Configuration ......................................................... Fully balanced, dual-mono Power Supply Transforme rs ..................................... 2 x 10VA (for audio); 1 x 10VA (controller circuitry) Power Supply Capacita nce .
An important point after buying a device Simaudio P-7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simaudio P-7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simaudio P-7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simaudio P-7 you will learn all the available features of the product, as well as information on its operation. The information that you get Simaudio P-7 will certainly help you make a decision on the purchase.
If you already are a holder of Simaudio P-7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simaudio P-7.
However, one of the most important roles played by the user manual is to help in solving problems with Simaudio P-7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simaudio P-7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center