Instruction/ maintenance manual of the product SSW-4 Sima Products
Go to page of 8
Speaker Selectors Models SSW-4 and SSW-6 User Manual (SSW-4) (SSW-6).
Page 2 Table of Contents Important Safety Precautions ............................................................. 2 What’s Included ................................................................................... 2 Introduction.................
Introduction The Sima speaker selectors have been designed to let you add additional speakers around your home or office and turn them on and off without purchasing additional amplifiers.
Typical Hook up The diagram below shows a overview of a typical sy stem with the SSW-6 using 6 speaker pairs. Figure 3, Overview of typi cal system (SSW-6 shown) Installation Tips • It is recommended to use 18 or 16 AWG gauge stranded wire. For runs longer than 50’, 14 gauge is recommended.
• Push the tab and simultaneously insert the wire into the correct hole. • Verify that there are no wire frays. Connect the wires from the speaker output from your receiver or amplifier to the SSW-4/6 terminals m arked AMPLIFIER.
Page 6 Refer to your amplifier or receiver’s user manual or on the rear panel of the amplifier to determine the minimal speak er impedance that your amplifier can handle.
Page 7 Trouble Shooting Problem Solution No sound Make sure correct speaker is selected. Make sure no wires are touching each other or the case of the amplifier or SSW-4/ S SW-6 selector. One or both speakers turn off when music is playing Reduce volume level and unit will automatically reset.
Limited Warranty Limited Warranty Sima Products Corp. (“Com pany” ) warrants th at is the accom panying product proves to be defective to the original purch aser in material or workm anship within.
An important point after buying a device Sima Products SSW-4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sima Products SSW-4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sima Products SSW-4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sima Products SSW-4 you will learn all the available features of the product, as well as information on its operation. The information that you get Sima Products SSW-4 will certainly help you make a decision on the purchase.
If you already are a holder of Sima Products SSW-4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sima Products SSW-4.
However, one of the most important roles played by the user manual is to help in solving problems with Sima Products SSW-4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sima Products SSW-4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
