Instruction/ maintenance manual of the product 55M Sim2 Multimedia
Go to page of 12
DOMINO 55M RS-232C CONTROL SPECIFICATIONS Document Revision 1.0 (18 February 2005).
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS Table of Contents 1. INTRODUCTION 3 2. CONNECTION 3 3. COMMUNICATION PROTOCOL 4 H EADER 4 P AYLOAD 4 4. COMMANDS 5 R EMOTE C ONTROL K EY C ODES 5 O PERATION C ODES 7 G ET C ODES 10 5. EXAMPLES 11 6. WARNINGS 12 Revision History: Revision Date Software Version Description of Change 1.
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS 1. Introduction This document describes the communication and data formats used to control SIM2 DOMINO 55M via RS- 232C port. 2. Connection Switch off your Personal Computer and DOMI NO 55M before connecting RS 232C cable.
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS 3. Communication Protocol The communication protocol is packet orient ed. Packets consists of Header and Payload.
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS 4. Commands Remote Control Key Codes The following commands send simulated Remo te Control input to SIM2 DOMINO 55M.
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS Direct access codes Goto Brightness BE EF 02 06 00 C7 E1 7E 01 00 00 00 00 Goto Contrast BE EF 02 06 00 16 E0 7F 01 00 00 00 00 Goto Color BE EF 02 06 0.
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS Operation Codes The following codes provide direct access to SIM2 DOMINO 55M User Interface operations not accessible via a single Remote Control command.
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS LOW BE EF 03 19 00 AC 6E 01 C2 09 00 00 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 COLOR TEMPERATURE USER BE EF 03 19 00 3C AF 01 C2 09.
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS SET YCrCb AutoSync BE EF 03 19 00 92 04 01 82 08 00 00 00 00 00 00 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SET YCrCb 15kHz BE EF 03 19 00 5B 0C .
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS 8 9 10 11 12 13 14 15 16 17 18 19 20 Op Type Op ID 01 00 Op Target 00 00 Value 00 00 21 22 23 24 25 26 27 28 29 30 31 32 00 00 00 00 00 00 00 00 00 00 00 00 Get Codes Get Commands may be used to get the current value of DOMINO 55M parameters.
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS (1) Returned value is indeterminate when the unit is in No Signal state. Returned value may be different from the value displa yed on the OSD, as in the latter, the values have been normalized to the 0-100 range.
SIM2 DOMINO 55 M RS-232C CONTROL SPECIFICATIONS Command that simulate key 0 switches on the unit: the last source memorised prior to switch off is automatically selected. 2. Send the simulated "MENU RIGHT" Remote Control keycode. Send the packet: BEEF02060023E75A0100000000.
An important point after buying a device Sim2 Multimedia 55M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sim2 Multimedia 55M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sim2 Multimedia 55M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sim2 Multimedia 55M you will learn all the available features of the product, as well as information on its operation. The information that you get Sim2 Multimedia 55M will certainly help you make a decision on the purchase.
If you already are a holder of Sim2 Multimedia 55M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sim2 Multimedia 55M.
However, one of the most important roles played by the user manual is to help in solving problems with Sim2 Multimedia 55M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sim2 Multimedia 55M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
