Instruction/ maintenance manual of the product HT305 Sim2
Go to page of 37
User and Installation Manual The home theater pr ojector H T 3 0 5 cod.46.0495.000.
2 LIGHT F1 ZOOM FOCUS F2 MENU - Activates the On Screen Display menus. Navigates menu pages. FREEZE Freezes a moving picture. ST AND-BY Switches off to stand-by . 0-9 Keys Switch on from stand-by and allow direct source selection. ESCAPE Deactivates the On Screen Display .
3 1 INTRODUCTION Congratulations and thank you for choosing a HT305 projector , a SIM2 Multimedia SpA product (Fig. 1) . DIGITAL INPUT AUDIO OUT ZOOM CONTROL (RS 232) GRAPHICS RGB R/Cr G/Y B/Cb HV 1 2.
4 A s ophis ticat ed prop rieta r y optica l syste m, coupled with a hight perform ance zoom lens ens ures hight contr ast image s , superi or uniformity and edge-to-edge definition .
5 1 Projection lens 2 L ens shift knob 3 Cooling air inlet vents 4 Remote control IR sensor 5 Cooling air outlet vents 6 Adjustable carr y-handle 7 Adjustable levelling feet 8 Ceiling/wall bracket fix.
6 Prior to switching on the projector please read each chapter of this manual carefully as this manual provides basic instructions for using the projector . The installation of the lamp assembly , preliminar y adjustments and procedures that necessitate the removal of the top cover , must be carried out by authorised, trained technicians.
7 Please follow carefully the warnings listed below , to ensure safe and long term per formance of your projector . • Connect the projector to a power supply with a nominal voltage within the following values: 100-240 V ac, 50/60 Hz , earthed (Fig. 3).
8 refully follow the installation and safety instructions provided with the bracket ’s literature . • Please remove batteries from the remote control if not in use for a long period of time .
9 P osition the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling or wall installation . CAUTION: In the case of ceiling or wall mounting using a suspension bracket, follow the instr uctions carefully and comply with the safety standards you will find in the box together with the bracket.
10 KEYSTONE 20% C-SYNC Fig. 9 The Orientation adjustment in the Set up menu will allow the projec tor to be used for desktop front , ceiling front , desktop rear and ceiling rear installations (Fig.
11 A void light shining directly on the screen during projection as this will reduce contrast and black level detail on the projected image . For the true cinema experience best results are achie- ved with little or no ambient light .
12 6 CONNECTIONS T o obtain the best per fo rmance from your projecto r , we recom- mend the use of good quality “ video cables ” to the various signal sources (75 ohm Impedance).
13 Frequency of between 32-80 kHz and a V ertical frequency of between 48-100 Hz. Computer Resolutions of VGA, SVGA, XGA, SXGA and UXGA can be displayed.
14 care to obser ve the correspondence with the outputs on the source . The video signals that can be connected to this input can have horizontal scanning frequencies of 15 kHz (standard video resolution), 32 kHz , or higher (progressive scanning video , high definition video).
15 7 KEYBOARD P AD Freccia Su/Giù/Sinistra/Destra Navigate through and make adjustments to the On Screen menus . Arrow Up/Down switch on from stand-by and recall Source Selection menu.. Switches off to stand-by . Menu Activates the On Screen Display menus.
16 8 REMOTE CONTROL Insert the batteries , taking care to match the polarity , as indi- cated in the batter y recess of the remote (Fig. 24) . + - + - + - + - Fig. 24 Change the batteries in the remote control if experiencing difficulty in sending commands to the projector .
17 Inputs 1 VIDEO 2 S-VIDEO 3 COMPONENT/RGBS 4 GRAPHICS RGB 5 HDMI 1 2 3 4 5 15kHz RGBS Inputs 1 VIDEO 2 S-VIDEO 4 GRAPHICS RGB 5 HDMI 1 2 3 4 5 15kHz RGBS 3 COMPONENT/RGBS YCrCb AutoSync YCrCb 15KHz YCrCb RGB AutoSync RGB 15KHz RGB Fig.
18 Fig. 28b Fig. 28a whi ch appe ar as a supe rim pos ed wind ow in whic h the sele cti on is made with the È / Í keys (F ig. 28) . These submenus are accessed by pressing the Ë key , while black objects alongside other dark coloured objects . CONTRA ST Use this control to adjust the image’s black level without affec- ting white areas .
19 BRIGHTNESS CONTRAST Video S-Video RGBS YCrCb RGB Grafico HDMI™ RGBS 15kHz YCrCb 15kHz ADJUSTEMENTS INPUTS COLOR - - - - - - - - - - - - - - - - - - - - - - TINT (NTSC) SHARPNESS SHARPNESS MODE FI.
20 IMAGE This menu features adjustments relating to picture position, aspect ratio , etc . A SPECT This adjustment allows you to change the dimensions and aspect ratio (relationship between width and height) of the displayed image . There are five preset aspects available and three personalise d aspects (with user-s ettabl e parameter s).
21 Along vertical lines the color temperature is constant but is different from black body cur ve , which mean if you select point from the high part of the diagram you increa se the green componet , while low part of diagram cause an increase of purple component .
22 SETUP The setup menu contains less frequently used adjustments that may be required during installation (e .g. On Screen Display language selection or the display of T est Patterns). ORIENT ATION Selec t the option that best descri bes the insta llatio n i.
23 n the initial phase of installation the configurable k eys (F1, F2) ser ve as optical zoom and optical focus (F ig.34). POWER ON If active (AUT O) allows to power up the system directly from the power feeder , once the initializing phase is completed.
24 Once one letter has been inserted, to insert the following one it is necessar y to move with the cursor in the next right position with the Ë key of the remote control, repeat this procedure to insert other letters . Use the È key to switch from small case to capital letters and viceversa.
25 MEMORIES The main parameters of the image may be saved in distinct groups of values (known as ‘ Memories’); these parameters can subsequently be applied all together by way of a single command.
26 On ent erin g the ‘ M emor ies’ men u, a copy of the curr ent settin gs is saved in a temporar y menu (labelled with 0 - AUTO ). Once one or more memories have been recalled, you can restore the settings that were effective at the moment the Memories menu was accessed by selecting 0 - AUTO .
27 11 TROUBLESHOOTING GUIDE No power (Green and red LED are OFF) - Check the power switch at the rear: it must be in position I . - Check if the power cable has been connected correctly to a working socket . - Check the power sock et fuse , at the rear of the projector .
28 Y ou can purchase the following optional accessories at your Dealer: - W all/Ceiling Bracket Kit . 12 OPTIONAL ACCESSORIES Use only original, or SIM2 Multimedia approved , accessories .
29 A TECHNICAL SPECIFICA TIONS OPTICAL HT 305 Projection system: optic al engi ne base d o n 1 DM D™ DarkChip3™ chip , sealed housing, dusty proof DMD™ panel: resolution 1280x720 pixel Brightnes.
30 ELECTRICAL Input Signals: CVBS on RCA/Phono type connector S- VHS on Mini-DIN connector RGBHV on DB15HD connector RGBS / YCrCb on RCA/Phono type connector HDMI™ Horizontal frequency: fro m 15 to .
31 H H L L B DIMENSIONS 74 352 174 102 318 (Fig.40b) (Fig.40a) unit: mm (inches) C PROJECTION DIST ANCES F ollow the table below to deter mine the optima l projec tion distanc e “L ” betwe en the scre en (Fig. 40a) and the center of the lens . This will help you to obtain the desired screen size .
32 Projection distance table HT305 Projection distance table HT305 Screen Screen size width (diagonal) min. L H max max. L H max Min projection distance 4/3 3,4 11’ 0” 4,0 13’ 2” 4,7 15’ 7.
33 D ON SCREEN MENU L A YOUT Brightness Contrast Color T int Sharpness Filter Cinema Mode Video T ype Video • S-V ideo [NTSC] YCrCb15kHz RGBS 15kHz RGBS RGB Grafico HDMI™ Orientation Keystone Lens.
34 Brightness Contrast Color T int Sharpness Filter Cinema Mode Video T ype Video • S-V ideo [NTSC] YCrCb15kHz RGBS 15kHz RGBS RGB Grafico HDMI™ Orientation Keystone Lens Power ON T est patterns I.
35 Brightness Contrast Color T int Sharpness Filter Cinema Mode Video T ype Video • S-V ideo [NTSC] YCrCb15kHz RGBS 15kHz RGBS RGB Grafico HDMI™ Orientation Keystone Lens Power ON T est patterns I.
36 1 INTRODUCTION 3 2 IMPORT ANT S AFETY INSTRUCTIONS 6 3 P ACKA GING AND CONTENTS 8 4 INST ALL A TION 9 5 SWITCHING ON AND OFF THE PROJECTOR 11 Switch on from stand-by 11 Switching off and returning .
• Due to the constant product development , specifications and design might be subject to change without notice. SIM2 Multimedia S.p .a. • Viale Lino Zanussi, 11 • 33170 P ordenone - ITAL Y Phone +39.434.383.253-256 • Fax +39.434.383260-261 www .
An important point after buying a device Sim2 HT305 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sim2 HT305 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sim2 HT305 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sim2 HT305 you will learn all the available features of the product, as well as information on its operation. The information that you get Sim2 HT305 will certainly help you make a decision on the purchase.
If you already are a holder of Sim2 HT305, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sim2 HT305.
However, one of the most important roles played by the user manual is to help in solving problems with Sim2 HT305. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sim2 HT305 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
