Instruction/ maintenance manual of the product Grand Cinema Line RTX55 Sim2
Go to page of 21
USER AND INSTALLATION MANUAL ENGLISH RTX 45-55.
IMPORT ANT SAFETY INSTRUCTIONS ! CAUTION ELECTRIC SHOCK HAZARD DO NOT OPEN For the DigiOptical Image Processor use exclusively the power supply unit provided or an alternative power supply unit expressly approved by SIM2. • Beware of power supply cables.
T ABLE OF CONTENTS INTRODUCTION ....................................................................................................................... 4 1 INST ALLA TION ................................................................................
4 INTRODUCTION Congratulations on your choice of the SIM2 Grand Cinema RTX system! The RTX system combines the signal processing capabilities of the DigiOptical Image Processor with the high fidelity reproduction of the DLP™ technology Display by linking the two units via a fibre optic cable.
5 DLP and DMD are registered trademarks of T exas Instruments. DCDi is a registered trademark of Faroudja, a division of Genesis Microchip, Inc. The DigiOptical Image Processor , which should be ideal.
6 CONNECTING THE TWO UNITS The RTX system consists of two separate units (the DigiOptical Image Processor and the Display), each of which is equipped with a power cable; the two units are interconnected by a 20 m fibre optic cable.
7 CONNECTING THE VIDEO SOURCES Connect the cables from the video sources, the serial cable from the external control unit and the optical fibre cables for connection to the Display , to the rear panel of the DigiOptical Image Processor .
8 Source Signal DigiOptical Image Processor Connector Input Te levision receiver from Antenna, Satellite or Cable (Analogue or Digital) Composite video S-Video Components RGB Vid eo S-Video Component/.
9 The video signals that can be connected to this input can have horizontal scanning frequencies of 15 kHz (standard video resolution), 32 kHz, or higher (progressive scanning video, high definition video). Some sources provide the facility to choose between a progressive signal or an interlaced signal.
10 SWITCHING ON AND OFF 2 OPERA TION will operate but it may be unable to read certain input signals correctly . Switching on the system: • from the remote control (keys 0-9) • from the Display keypad (keys and ). Ty pically , the picture will appear after 15-20 seconds.
11 E SC MEN U AU T O Navigate through and make adjustments to the on screen menus. switches on from stand-by and calls the Input Selection menu. (if pressed in the absence of the On Screen Display) calls the INFO information window MENU Activates the On Screen Display menus.
12 Not active in this model. Not active in this model. MENU Activates the On Screen Display menus and allows navigation though the various pages. FREEZE Freezes a moving picture. Not active in this model. STAND-BY Switches system to stand-by. KEYS 0-9 Switch system on from stand-by and allow direct source selection.
13 by pressing the ESC key , or when the time allowed for displaying the on-screen menu has lapsed (set in the Set-up Menu). Inputs 5, 6, 7 and 8 can receive RGB and YCrCb signals, at 15 kHz, 32 kHz or higher .
14 SHARPNESS MODE This allows you to select the type of processing associated with sharpness adjustment. In the case of a progressive or interlaced video signal VIDEO mode is advisable; with PC graphic signals use GRAPHIC MODE. FIL TER This allows you to select the mode in which the input signal is processed.
15 HIGH (corresponding to approx. 9300 degrees Kelvin), MEDIUM (approx. 6500 degrees Kelvin), LOW (approx. 5000 degrees Kelvin) and one PERSONAL setting controlled by the user with separate adjustments for RED, GREEN and BLUE. Generally , the HIGH value is more suitable for displaying graphic images, MEDIUM and LOW for video images.
16 MAINTENANCE AND TROUBLESHOOTING MAINTENANCE AND CLEANING The units in the system do not require internal adjustments and do not contain any user-serviceable parts. For replacement of the lamp or any other service requirements seek qualified technical assistance from your nearest Dealer .
17 Vi deo image showing colour misalignment on vertical details • Check compatibility of the video or graphic signals with the technical specifications of the system, and specifically , with the specifications of the selected input. • Adjust Y/C DELA Y settings in the IMAGE menu to reduce colour misalignment.
18 TECHNICAL SPECIFICA TIONS 3 ADDITIONAL INFORMA TION DISPLA Y OPTICAL Optical system: optical engine based on 1 DMD™ chip; sealed dust-proof housing DMD™ panel: TI HD2 0.8" 12 ° Dark Metal - 1280x720 pixels (aspect ratio 16:9) Projection lens: UltraWide angle F/2.
19 Colour temperature: from 5000 to 9300 ° K (three presets and one user settable) Control: infrared remote control, RS232 serial (DB9 connector , female) Out puts: 2 12-V jack connector outputs (1 a.
20 1227.8 mm - 48.34" 996.2 mm - 39.22" 1494.2 mm - 58.82" 1217.6 mm - 47.93" 956.3 mm - 37.65" 11 88 mm - 46.78" 235 mm 9.25" 368.6 mm 14.51" 11 08 mm - 43.62" 11 08 mm - 43.62" 245 mm 9.64" 420.
21 Brightness Contrast Colour Ti nt Sharpness Filter Cinema Mode Vid eo T ype Vid eo • S-Video [NTSC] YCrCb15kHz RGBS 15kHz RGBS 32kHz RGB Graphic DVI-D Language OSD Background OSD Position OSD T im.
An important point after buying a device Sim2 Grand Cinema Line RTX55 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sim2 Grand Cinema Line RTX55 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sim2 Grand Cinema Line RTX55 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sim2 Grand Cinema Line RTX55 you will learn all the available features of the product, as well as information on its operation. The information that you get Sim2 Grand Cinema Line RTX55 will certainly help you make a decision on the purchase.
If you already are a holder of Sim2 Grand Cinema Line RTX55, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sim2 Grand Cinema Line RTX55.
However, one of the most important roles played by the user manual is to help in solving problems with Sim2 Grand Cinema Line RTX55. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sim2 Grand Cinema Line RTX55 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
