Instruction/ maintenance manual of the product ST50GF Silverstone
Go to page of 6
Industry-leading reliability 500+500W watts maximum output power (ST50GF) 420+420W watts maximum output power (ST42GF) High efficiency with 80Plus Silver certification (ST50GF) High efficiency with 80.
ST50GF / ST42GF SPECIFICA TION SilverStone GEMINI SST -ST50GF SST -ST42GF Mini Redundant Switching Power Supply With Active PFC 500W+500W 420W+420W 1. Input Requirements 1-1. Input V oltage The power supply shall be operated at universal input voltage defined in the following table.
ST50GF / ST42GF 2-2. DC Load Requirements SST -ST50GF Note : 1. The maximum continuous total DC output power shall not exceed 500 W atts. 2. The maximum continuous combined load on +5V and +3.3V outputs shall not exceed 170 W atts. 3. The maximum continuous combined load on +5V , +3.
ST50GF / ST42GF 05 MAX 600 ms Units MAX 100 ms Units 2-6. T otal Output Power SST -SG50GF SST -ST42GF 2-7. Remote ON/OFF Control The power supply outputs shall be enabled with an active-low TTL signal. When TTL signal is low , the DC outputs are to be enabled.
ST50GF / ST42GF 3-2. Short Circuit Pr otection A short circuit placed to ground shall cause no damage or power supply shall be shutdown. (The contact resistance is 0.05 ohm when the outputs short circuit.) 3-3. Protection Reset When the power supply latches into shutdown condition due to a fault on an +5V ,+3.
ST50GF / ST42GF 14. Redundant Output Signal: 15. Dimension 15-1. Dimension (W x H x D) : 150mm(5.90”) x 86mm(3.38”)x 193mm(7.59”) 15-2. Connectors M/B 24PIN connector 09 Orange Orange Blue Black Green Black Black Black White Red Red Red Red Black Orange Black Red Black Red Black Grey Purple Y ellow Orange 1 +3.
An important point after buying a device Silverstone ST50GF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Silverstone ST50GF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Silverstone ST50GF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Silverstone ST50GF you will learn all the available features of the product, as well as information on its operation. The information that you get Silverstone ST50GF will certainly help you make a decision on the purchase.
If you already are a holder of Silverstone ST50GF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Silverstone ST50GF.
However, one of the most important roles played by the user manual is to help in solving problems with Silverstone ST50GF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Silverstone ST50GF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
