Instruction/ maintenance manual of the product ST50F-ES Silverstone
Go to page of 7
High efficiency with 80Plus certification 24hour continuous power output with 40 C operating temperature Class-leading single +12V rail Multiple protection circuitry Silent running 120mm fan with 18dBA PCI-E 8pin and PCI-E 6pin connector support ATX 12V 2.
SPECIFICATION SilverStone Essential Plus ST50F-ES ST40F-ES ATX12V 2.3 Switching Power Supply With Active PFC PS/2 01 This specification defines the performance characteristics of a single phase 500 and 400 watts, 5 output power supply .
03 ST50F-ES, ST40F-ES provides an efficiency of >80% when measured at full load under 115V/60Hz and 230V/50Hz condition. Maximum continuous total DC output power should not exceed 500W. Maximum continuous combined load on +3.3VDC and +5VDC outputs shall not exceed 120W.
05 3.3 Regulation 3.4 Rise Time 3.3.1 ST50F-ES The cross regulation defined as follows, the output regulation should be within the specified range. DC output rise time is less than 20 mS at nominal line and full load. 3.5 Hold-up Time DC +5V output maintains at least 8mS after power off which hold within para 3.
07 5. START STABILITY 6. ENVIRONMENTS 5.1 No Load Start When power is applied to ST50F-ES & ST40F-ES with no load connected or under minimum load connected, neither damage to power supply nor hazards to users will occur. 5.2 Cold Start 6.1 Temperature and Humidity 6.
09 * T1 : Turn on time ( 2 sec. Max.) * T2 : Rise time ( 20mS Max.) * T3 : Power good turn on delay time ( 100 < T3 < 500 mS ) * T4 : Switch on time (0.5 sec. Max.) * T5 : Power good turn off delay time ( 1.0 mS Min.) PS-ON/OFF * T6 : Power hold-up time ( 8 mS Min.
11 4PIN peripheral connector (HDD) 4PIN floppy connector (FDD) Signal Pin Pin Signal Yellow +12V Black COM Black COM Red +5VDC 1 2 3 4 1 +5VDC 2 COM 3 COM 4 +12V Red Black Black Yellow SATA connector Signal Pin Orange +3.
An important point after buying a device Silverstone ST50F-ES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Silverstone ST50F-ES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Silverstone ST50F-ES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Silverstone ST50F-ES you will learn all the available features of the product, as well as information on its operation. The information that you get Silverstone ST50F-ES will certainly help you make a decision on the purchase.
If you already are a holder of Silverstone ST50F-ES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Silverstone ST50F-ES.
However, one of the most important roles played by the user manual is to help in solving problems with Silverstone ST50F-ES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Silverstone ST50F-ES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
