Instruction/ maintenance manual of the product LC14S Silverstone
Go to page of 16
.
1.
2.
3.
4 Unscrew four case screws to remove case cover Lösen Sie die vier Schrauben an der hinteren Abdeckung und entfernen Sie diese Dévissez les quatres vis pour retirer le capot du boîtier Desatornille.
5 Power Supply Installation-Insert power supply into the case, secure with four # 6 -32 x 6 screws Motherboard Installation- Insert included motherboard standoffs into holes on the bottom of the case .
6 Place motherboard into the case and secure with M3 screws Remove 3.5” drive bracket located behind the acrylic front panel by unscrewing two screws on top of the bracket 5 6 Setzen Sie ihr Mainboard in das Gehäuse ein und sichern Sie es mit M3 Schrauben Entfernen Sie die 3.
7 Prepare your hard drive for installation Use #6-32 x 6 screws to install hard drive into the 3.5” drive bracket, up to three hard drives can be installed 7 8 Bereiten Sie ihre Festplatte für die Installation vor Benutzen Sie #6-32 x 6 Schrauben um ihre Festplatte in der 3.
8 After hard drives are installed, place the 3.5” drive bracket back into the case and secure with screws Use hex wrench to remove two hex screws located on top of the right- front panel 9 10 Setzen Sie die 3.
9 Remove right-front panel slowly and carefully as indicated in the photo Insert optical drive into the top slot of the 5.25” drive bay 11 12 Entfernen Sie die rechte Front-Abdeckung langsam und vorsichtig wie auf der Abbildung gezeigt Setzen Sie das optischen Laufwerk in den oberen Einschub der 5.
10 Insert the second optical drive or other 5.25” drive bay device intothe bottom slot Secure both 5.25” drives or devices with screws 13 14 Setzen Sie das zweite optische Laufwerk oder ein anderes 5.25” Laufwerk in den unteren Einschub ein Befestigen Sie beide 5.
11 When reinstalling right-front panel back onto the case, make sure the push-pin on the panel is aligned with the catch in the case. Secure the right-front panel with hex screws 15 16 Achten Sie beim Einsetzen der rechten Front-Abdeckung darauf das der Push-Pin richtig ausgerichtet ist.
12 A second 3.5” drive bracket is located beneath the 5.25” drive bays with room for one more hard drive. It can be taken out of the case easily with a screw removed After installing hard drive into the bracket, slide it back underneath the 5.25” drive bays 17 18 Unter der 5.
13 Secure reinstalled bracket with screw For extra EMI protection, route front panel cables through the included wire ring 19 20 21 Schrauben Sie die Halterung wieder fest Führen Sie die Kabel der Fr.
14 Insert the connector from the hotkey module into a USB pin header on your motherboard (please refer to your motherboard manual for connection information, the side with the black wire is the ground.
May , 2008.
An important point after buying a device Silverstone LC14S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Silverstone LC14S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Silverstone LC14S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Silverstone LC14S you will learn all the available features of the product, as well as information on its operation. The information that you get Silverstone LC14S will certainly help you make a decision on the purchase.
If you already are a holder of Silverstone LC14S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Silverstone LC14S.
However, one of the most important roles played by the user manual is to help in solving problems with Silverstone LC14S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Silverstone LC14S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
