Instruction/ maintenance manual of the product SDRB 1000 A16 Silvercrest
Go to page of 10
K OMPERNASS GMBH BURGSTRASSE 21 · D-44867 BOCHUM www .k omper nass.com ID-Nr .: SDRB1000A1-07/10-V2 S team B rush SDRB 1000 A1 6 Steam Brush Operating instructions CV_56986_SDRB1000A1_LB6.
SDRB 1000 A1 1 q 9 w e r 7 6 5 4 3 2 8 t 0 CV_56986_SDRB1000A1_LB6.qxd 05.08.2010 11:24 Uhr Seite 4.
- 1 - CONTENT P A GE Safety instructions 2 Intended Use 3 T echnical data 3 Items supplied 3 Description of the appliance 3 Before the First Usage 3 Operation 4 Filling with water .......................................................................
- 2 - STEAM BRUSH Safety ins tructions Risk of personal injury! • When the appliance is hot, grasp it only by the handle. • This appliance is not intended for use by individuals (including childre.
- 3 - • NEVER use the appliance adjacent to water con- tained in a bath, shower , wash basin or other vessels. The pr oximity of moisture pr esents a danger , ev en when the appliance is switched of f. • Y ou may not open t he appliance housing. P ermit only authorised technicians to repair a defective appliance.
- 4 - • Fill the water tank 1 with water (See chapter "Fil- ling with water"). • Inser t the power plug 7 into a correctly installed and earthed mains power sock et. • Hold the steam brush horizontally. • Place t he temperature r egulator 3 at the position "MAX".
- 5 - • Close the water fill opening 2 to the water tank 1 . Ensure that the lug on the water fill opening 2 sits in the indentation on the lid. Only in this way is the water tank 1 properly closed. • Replace the water tank 1 back onto the appliance.
- 6 - Note: Should you pr ess the steam blast button 8 whilst the heating-up control lamp 5 is glowing the result will be condensed water instead of steam, and w ater will drip fr om the sole of t he iron 0 . • Leave the garment on the clothes hanger to cool down befor e putting it on.
- 7 - • If you w ant to put the appliance down during use, fold out the stands 9 to the front and place the appliance on them. When you are ready to re u- se the appliance, simply fold the stands 9 back to the rear . Af ter using the steam brush • Place the temperature regulator 3 at the position "MIN".
- 8 - Disposal Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. Dispose of the appliance through an appro ved dis- posal centre or at y our community waste facility . Obser ve the currently applicable regulations.
An important point after buying a device Silvercrest SDRB 1000 A16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Silvercrest SDRB 1000 A16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Silvercrest SDRB 1000 A16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Silvercrest SDRB 1000 A16 you will learn all the available features of the product, as well as information on its operation. The information that you get Silvercrest SDRB 1000 A16 will certainly help you make a decision on the purchase.
If you already are a holder of Silvercrest SDRB 1000 A16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Silvercrest SDRB 1000 A16.
However, one of the most important roles played by the user manual is to help in solving problems with Silvercrest SDRB 1000 A16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Silvercrest SDRB 1000 A16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center