Instruction/ maintenance manual of the product SX-3700WB Silex technology
Go to page of 14
2-1 Users Manual SX2 PRICOM SX-3700WB 2. PRICOM SX-3700WB This product is a wireless USB device server that will serve USB type peripheral equipment (a printer, scanner etc.). By using the bundled PRICOM Monitor SX, it is possible to view the state of the connected printer via a network.
2-2 Users Manual SX2 PRICOM SX-3700WB Environment The following are needed for this product. The followings are objects that connect to the network. - PC with wireless communication - USB Cable (A-B Type Connectors) - Printer, Scanner etc.
2-3 Users Manual SX2 PRICOM SX-3700WB Equipment explanation Part name and function <Top/Front Side> The LEDs have the following meaning: Infra LED (Green) Lights when an Infra. mode network connection is established. Link LED (Green) Lights when an OldAdHoc mode network connection is flashed.
2-4 Users Manual SX2 PRICOM SX-3700WB - Do not turn off the power to this product while it is initializing to factory default. - When this product is turned on again after factory default is completed, do not push the pushbutton switch.
2-5 Users Manual SX2 PRICOM SX-3700WB < Put into infrastructure mode > 1. Please verify that AC adapter is connected and that this product has started normally. 2. Push and hold the push switch down. Continue to hold down the push switch for about 5 seconds.
2-6 Users Manual SX2 PRICOM SX-3700WB 4. Make sure that printer is working and turned on. - Using an AC adapter other than the one provided with this product can cause damage. - Wait for 2 or more seconds after connecting/disconnecting the USB cable. - Do not disconnect the USB cable during printing, scanning or reading/writing from a memory card.
2-7 Users Manual SX2 PRICOM SX-3700WB Other Functions The following describes of the other functions of this product. Function Assign the IP address automatically using DHCP, BOOTP and RARP - DHCP/BOOTP If a DHCP/BOOTP server is working on your network, the DHCP/BOOTP protocol of this product will assign the IP address to this product.
2-8 Users Manual SX2 PRICOM SX-3700WB - Scanner server If you use a USB device, this product will allow you to share the scanner via the bundled PRICOM USB Utility. - The PRICOM USB Utility is compatible with Wndows2000/WindowsXP - This product can connect to one scanner.
2-9 Users Manual SX2 PRICOM SX-3700WB Specification Hardware Specification CPU 32bit RISC CPU Memory RAM :8MByte FlashROM :1MByte Network Interface IEEE802.
2-10 Users Manual SX2 PRICOM SX-3700WB Software Specification Supported Protocol: TCP/IP, NetBEUI/NetBIOS, AppleTalk TCP/IP: Network Layer: ARP, RARP, ICMP, IP, IPv6, ICMP6 Session Layer: TCP, UDP App.
2-11 Users Manual SX2 PRICOM SX-3700WB This product operates at 2.4GHz No radio license is required to use this product. Take note of the following points. Do not use next to the following. - Microwave, scientific instruments, pacemaker or other medical equipment.
2-12 Users Manual SX2 PRICOM SX-3700WB Wireless Equipment for 2.4GHz band This band of equipment is used by the microwave, industry, science, medical equipment and licensed in room or low power (non licensed)radio stations. - Before you use this equipment, verify that it will not interfere with other broadcasting.
2-13 Users Manual SX2 PRICOM SX-3700WB The PC connects directly to our product in AdHoc mode. <AdHoc mode> Each wireless product connects directory.
2-14 Users Manual SX2 PRICOM SX-3700WB <Infrastructure mode> In Infrastructure mode this product connects through an access point. An Access point allows communication between wired and wireless environments. Connect this product to the USB device using a USB cable.
An important point after buying a device Silex technology SX-3700WB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Silex technology SX-3700WB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Silex technology SX-3700WB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Silex technology SX-3700WB you will learn all the available features of the product, as well as information on its operation. The information that you get Silex technology SX-3700WB will certainly help you make a decision on the purchase.
If you already are a holder of Silex technology SX-3700WB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Silex technology SX-3700WB.
However, one of the most important roles played by the user manual is to help in solving problems with Silex technology SX-3700WB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Silex technology SX-3700WB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
