Instruction/ maintenance manual of the product 140-00197-100 Silex technology
Go to page of 14
SX-SDCAG 802.11a/b/g SDIO Module User Manual 140-00197-100 Rev A.
140-00197-100 Revision A © 2010 Silex Technology America, Inc. All rights reserved. February 2010 Silex Technolog y America SP ECIFICALLY DISCLAIM S THE IMPLIED WARRANTIES OF MERCHANTABILIT Y AND FITNESS OF THIS PRODUCT FOR A PARTICULAR PURPOSE.
Contents Silex Page 1 140-00197-100 Revision A Contents About This Us er M anual ......................................................................................................... ................................... 2 Safety Pr ecautions ......
Page 2 Silex About This User Guide 140-00197-10 0 Revision A About This User Manual This user manual provides detailed specifications, di agr ams and additional information required to install the SX- SDCAG 802.
Introduction Silex Page 3 140-00197-100 Revision A Chapter 1: Introduction The SX-SDCAG is an 802.11a/b/g radio/baseba nd mo dule in a standard SDIO form factor.
Introduction Silex Page 4 140-00197-100 Revision A Chapter 2 Hardware Specifications/Compliance FCC Information FCC ID: N6C-SXSDCAG NOTICE In accordance with FCC Part 15, the SX-SDCAG is listed as a Modular Transmitter device.
Specifications/Compliance Silex Page 5 140-00197-100 Revision A The available scientific evidence do es not show that any health problems are associated with usin g low power wireless devices. There is no p ro of, however, that these low powe r wi reless devices are absolutely safe.
Page 6 Silex Specifications/Compliance 140-00197-100 Revision A safe. Low power wireless device s emit low levels of radio frequency energy (RF) in the microwave range while being used.
Specifications/Compliance Silex Page 7 140-00197-100 Revision A Specifications Operating environment: Temperature: -20º to +70º C (-4º to +15 8ºF) Humidity: 20% to 80% Storage environment: Temperature: -30º to +85º C (-22º to +1 85ºF) Humidity: 20% to 85% Supply voltage: 3.
Installation Silex Page 8 140-00197-100 Revision A Chapter 3 Installation Installation Requirements The SX-SDCAG must be installed in a device that contains a 9-pin SDIO slot.
Specifications/Compliance Silex Page 9 140-00197-100 Revision A 2. Connect one end of the antenna cable to the main antenna conne ctor on the SX-SDCAG (see figure 2). If you are using a diversity antenna configuration, connect one end of the second antenna cable to the secondary ante nn a on the SX-SDCAG.
Antenna Information Silex Page 10 140-00197-100 Revision A Appendix A Antenna Information Antenna Specifications Please refer to the Ethertronics we bsite @ www.ethertronics.com for more detailed inform atio n for the Prestta WLAN Embedded Antenna, Part No.
Antenna Information Silex Page 11 140-00197-100 Revision A Please refer to the Pulse website @ www.pul seeng.com/antennas for more detailed information for the Pulse Dualband WLAN Cerami c Antenna, Part No. W3006. Table 2 Electrical Specifications Parameter Value Antenna Type High-Dielectri c Mono pole Frequency Range 2.
Antenna Information Silex Page 12 140-00197-100 Revision A Appendix B Silex Contact Information Silex Technology America, Inc. www.silexameric a.com Technical Support: support@silexameri ca.
An important point after buying a device Silex technology 140-00197-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Silex technology 140-00197-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Silex technology 140-00197-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Silex technology 140-00197-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Silex technology 140-00197-100 will certainly help you make a decision on the purchase.
If you already are a holder of Silex technology 140-00197-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Silex technology 140-00197-100.
However, one of the most important roles played by the user manual is to help in solving problems with Silex technology 140-00197-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Silex technology 140-00197-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
