Instruction/ maintenance manual of the product RS-422 SIIG
Go to page of 8
1 Introducing the USB to RS-422/485 converter The USB to RS- 422/485 Converter enables you to choose between RS-422 and RS-485 formats for each port depending on the application you need.
2 RS422/485 Signal to Target Device USB port LED Dip switch Figure 1: Layout Package Contents • USB to RS-422/485 Converter • USB cable • Quick Installation Guide Layout.
3 Driver Installation This section provides information on how to install the USB to RS-422/485 drivers. Windows 2000/XP/Server 2003 1. Insert the driver CD after Windows boots. 2. AutoRun should start the installation. If AutoRun doesn’t start, click Start , Run , Type D:setup.
4 6. Click Install, Install , then click OK . 7. Click Finish . Restart your system to complete the installation. 8. Insert the USB ro RS-485/422 i nto a USB port. The driver will install automatically. To Verify Installation 1. Check Device Manger to verify installation.
5 Blank Page.
6 Blank Page.
7 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
USB to RS-422/485Converter is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
An important point after buying a device SIIG RS-422 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG RS-422 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG RS-422 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG RS-422 you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG RS-422 will certainly help you make a decision on the purchase.
If you already are a holder of SIIG RS-422, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG RS-422.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG RS-422. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG RS-422 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
