Instruction/ maintenance manual of the product PCI-32T SIIG
Go to page of 6
1 Introducing the FireWire 800 PCI-32T The FireWire 800 PCI-32T is designed to support Pentium or equivalent PC computers. It provides 2 independent hot-pluggable Firewire 800 (1394b) ports and 1 1394a port with data transfer rates up to 800Mbps.
2 Figure 1. Board Layout Hardware Installation Note: For Low Profile systems, replace the currently mounted bracket with with the included Low Profile bracket. General instructions for installing the card are provided below, since the design of computer cases and motherboards vary.
3 Software Installation This section provides information on how to install the FireWire 800 PCI-32T drivers. Please follow the directions below for your operating system. Windows Driver Installation For Windows 98SE 1. At the Add New Hardware Wizard , click Next .
4 6. Insert the driver CD, check CD-ROM drives , then click Next . 7. Click Next . 8. Click Finish . Restart Windows to complete the installation. For Windows XP Windows XP automatically installs it's built-in 1394a driver for the FireWire 800 PCI-32T .
5 Technical Support QUESTIONS? SIIG’s Online Support has the answers! Simply visit our web site at www.siig.com and click SUPPORT. Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away.
UK Warranty & Support Information The 5 year warranty supplied with this product is offered by SIIG, Inc. If you should happen to encounter any problems with this product, please follow the procedures below. 1. If it is within the first year of purchase, please return product to the outlet you purchased from.
An important point after buying a device SIIG PCI-32T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG PCI-32T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG PCI-32T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG PCI-32T you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG PCI-32T will certainly help you make a decision on the purchase.
If you already are a holder of SIIG PCI-32T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG PCI-32T.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG PCI-32T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG PCI-32T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
