Instruction/ maintenance manual of the product II-150 SIIG
Go to page of 12
1 SATA II-150 PCI Quick Installation Guide Introducing the SATA II-150 PCI The SATA II-150 PCI is an ultra high-speed dual channel Serial ATA Generation 2 controller for use in PCI enabled systems.
2 System Requirements • Pentium ® or equivalent PC with an available PCI slot • Windows ® 2000 / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Vista (32-/64-bit) Package Contents • SATA II-150 PCI • SATA data cable and power cable • Spare low profile bracket • Driver CD and this quick installation guide Layout Figure 1.
3 Hardware Installation Note : For low profile systems, replace the currently mounted bracket with the included low profile bracket. General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer ’ s reference manual for further information, if needed.
4 Driver Installation This section provides information on how to install the SATA II-150 PCI drivers for the following operating systems. Windows 2000 New Windows 2000 Installation A new installation of Windows 2000 requires a floppy disk for the driver installation.
5 5. Click Yes , then click Finish. 6. Restart Windows to complete the driver installation. Windows XP/Server 2003 New Windows XP/Server 2003 Installation A new installation of Windows XP/Server 2003 requires a floppy disk for the driver installation.
6 3. Insert the driver CD, select Install the software automatically (Recommended) , then click Next , Next . 4. Click Continue Anyway , then click Finish . 5. Restart Windows to complete the driver installation. To Verify Windows 2000/XP/2003 Installation 1.
7 Existing Windows Vista Installation 1. Install the board and boot up Windows. 2. At the Found New Hardware Wizard , insert the driver CD, select Locate and install driver software (Recommended) , then click Continue . 3. Click Next , select Install this driver anyway , then click Close .
8 4. Remove the driver CD and restart Windows to complete the installation. To Verify Windows Vista Installation 1. Right click Computer, click Manage , click Continue . 2. Select Device Manager . 3. Double click SCSI and RAID Controllers , then double click Initio inic1620 S-ATA Adapter .
9 4. Click Browse my computer for driver software (Advanced) . 5 . Type in D:Vista32, (change D: to match your CD-ROM drive letter), then click Next . 6. Click Install this driver software anyway , then click Close . 7. Remove the driver CD and restart Windows to complete the installation.
10 Existing Windows 2008 Installation 1. Install the board and boot up Windows. 2. At the Found New Hardware Wizard , insert the driver CD, select Locate and install driver software (Recommended) , then click Don't search online. 3. Click I don't have the disc.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
SATA II-150 PCI is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
An important point after buying a device SIIG II-150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG II-150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG II-150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG II-150 you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG II-150 will certainly help you make a decision on the purchase.
If you already are a holder of SIIG II-150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG II-150.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG II-150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG II-150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
