Instruction/ maintenance manual of the product CN-GP4111-S1 Siig
Go to page of 12
1 DP 4-Port Gigabit Ethernet PCIe Installation Guide 04-0959B Introduction The DP 4-Port Gigabit Ethernet PCIe adds four 10/100/1000 Mbps Ethernet ports to your system. Features and Benefits • Add a 4-port Gigabit Ethernet PCI Express adapter to your PC or Server • Compliant with IEEE 802.
2 System Requirements • Desktop computer with an available 4 x o r larger PCIe slot • Windows ® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / 2000 • Windows ® Server 2003 (32-/64-bit) / 2008 (32-/64-bit) / 2008 R2 / 2012 / Server 2012 R2 • MAC OS ® X 10.
3 Figure 1 Layout LED Indicators Two LEDs to monitor your network link speed: • Activity LED (upper): Blinking green light: 10 Mb/s or 100 Mb/s network connection and network activity • Activity L.
4 Hardware Installation The design of computer cases and motherboards vary, refer to your computer's reference manual for further information if needed. Discharge any static electricity build up in your body by touching your computer case for a few seconds.
5 Windows Installation Install the board and boot up Windows, then follow the instructions below to install the DP 4- Port Gigabit Ethernet PCIe drivers. NOTE : Some Windows OSes will automatically search preconfigured driver folder for the proper driver, this process may take several minutes to complete.
6 2 . Click Windows key and R . For Windows 8 : Type D:WindowsWin 8 setup.exe , click OK . (Change D: to match your CDDVD-ROM drive letter) For Windows 7 / Server 2008 R2 : Type D:WindowsWin7_2008R2setup.exe , click OK . (Change D: to match your CDDVD- ROM drive letter) 3 .
7 Or at the Start search box, type D:WindowsWin Vista_2008setup.exe , then press Enter . (Change D: to match your CDDVD- ROM drive letter) 3. At the User Account Control , click Continue . For Server 2008, skip this step. 4 . At Welcome , click Next .
8 4 . At Welcome , click Next . 5 . Click Install . Skip this step if not prompted. 6 . Click Finish to complete the installation. To Verify Windows Installation 1 .
9 Mac OS Installation 1 . Install the board and boot up the computer. 2 . Insert the driver CD, then double click the MAC OS X folder. 3 . Double click 10.5.x , 10.6.x or 10.7.x folder, then double click RTGNICv2.0.6.mpkg . 4 . At Introduction , click Continue .
10 Figure 2 Green bullet stands for successful driver installation. 3 . After the driver is succesfully installed, the card is ready for use. The bullet before PCI Ethernet.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
PRODUCT NAME DP 4-Port Gigabit Ethernet PCIe FCC RULES: TESTED TO COMPL Y WITH FCC P ART 15, CLASS B OPERA TING EN VIRONMENT : FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules.
An important point after buying a device Siig CN-GP4111-S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig CN-GP4111-S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig CN-GP4111-S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig CN-GP4111-S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig CN-GP4111-S1 will certainly help you make a decision on the purchase.
If you already are a holder of Siig CN-GP4111-S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig CN-GP4111-S1.
However, one of the most important roles played by the user manual is to help in solving problems with Siig CN-GP4111-S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig CN-GP4111-S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
