Instruction/ maintenance manual of the product 04-0600A SIIG
Go to page of 16
1 Satellite Speaker Mounts - 1 Pair Quick Installation Guide 04-0600A Introducing the Satellite Speaker The Satellite Speaker Mounts - 1 Pair are fully-adjustable (Tilt, Swivel, & Pivot) speaker wall or ceiling mounts.
2 Package Contents • (2) Speaker mounts • (2) 1-hole adapters • (2) 2/4-hole adapters • (2) 2 ¼” ceiling mount extensions • Mounting hardware • Quick installation guide Mounting Hardwar.
3 Installation Please read the instructions prior to installation. This speaker mount is designed solely for the mounting of small speakers weighing less than 8lbs. We are not responsible for damage that may occur if speakers weighing more than 8lbs. are used.
4 2. Once the proper configuration is determined, secure the post to the speaker. 3. Some speakers use the smaller M4 x 8 screw, which is inserted into the off-center on the mounting post, see Figure 2 below.
5 5. When the correct size is determined, place the screw through the speaker post and attach to the rear of the speaker enclosure. If the screw does not tighten properly, use the M5 x 1/8" plastic washer to tighten it up.
6 3. Engage the key hole nut into the key hole slot. 4. Put tension on the assembly by gently pulling back on the speaker mount post while tightening the 5/8"-32 x 5/8" machine screw, see Figure 4 on page 5. 5. The key hole nut will engage on the housing in the key hole slot.
7 1/4"-20 x 1/2" Machine Screw 4-Hole Orientation 2-Hole Orientation Figure 5 Back Speaker Self-Tapped Mounting 1. Locate the optimum location for the mounting plate and use it as template to mark the drilling locations. Do not drill or screw into the speaker where you could possibly damage the internal components.
8 Back Speaker ST5.5 x 19 Self Tapping Screw Figure 6 Mounting to the Wall or Ceiling The mounting hardware for the three different surface applications is supplied. You will need to determine what style hardware will work best with your mounting surface.
9 ST5.5 c 45 Self Tapping Screw Figure 7 3. Drill holes through the drywall and into the wood stud using a 1/8" drill bit. These holes should be drilled 1-7/8" deep, see Figure 7 above. 4. After the holes are drilled, mount the wall plate using the self tapping screws.
10 4. With the anchors in place, mount the wall plates using the ST5.5 x 45 self tapping screws, see Figure 8 below. Figure 8 ST5.5 x 45 Self Tapping Screw Insert screw through wall plate and into the alligator anchor Insert Alligator Anchor Pre Drill 5/16" Holes Concrete Surface 1.
11 Figure 9 Insert Alligator Anchor ST5.5 x 45 Self Tapping Screw Using the hammer to tap anchor into place Insert screw through wall plate and into the alligator anchor 3. With the wall anchor in place, mount the wall plate using the ST5.5 x 45 self tapping screws, see Figure 9 above.
12 Low-Profile Mounting This is for wall and ceiling application. 1. Install the low-profile portion of the speaker mount to the wall plate or 2-1/2" extension. 2. Secure the setscrew to hold the extension in place with the weight of the speaker attached.
13 Blank Page.
14 Blank Page.
15 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories.
An important point after buying a device SIIG 04-0600A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 04-0600A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 04-0600A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 04-0600A you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 04-0600A will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 04-0600A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 04-0600A.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 04-0600A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 04-0600A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
