Instruction/ maintenance manual of the product 04-0322C SIIG
Go to page of 16
1 Serial ATA 4-Channel PCI Quick Installation Guide 04-0322C Introducing the Serial ATA 4-Channel PCI The Serial ATA 4-Channel PCI is an ultra high-speed four channel Serial ATA controller for use in Pentium-class computers. It achieves burst data transfer rates up to 150MB/s (1.
2 Package Contents • Serial ATA 4-Channel PCI board • Serial ATA cable (x2) • Dual connector Serial ATA power cable • Driver CD • This quick installation guide Board Layout Serial ATA Connectors CN4 CN3 CN2 CN1 Hard Disk LED Pins Figure 1.
3 1. Turn OFF the power to your computer. 2. Unplug the power cord and remove your computer cover. 3. Remove the slot bracket from an available PCI slot. 4. Carefully align the card to the selected PCI slot push the board down firmly, but gently, until it is well seated.
4 Note : If you like to monitor disk activity of the Serial ATA hard drives, you may at this time connect the hard disk LED of the system case to the Hard Disk LED Pins on the Serial ATA controller, see Figure 1 , on page 2 for the location of the pins.
5 For Existing Installation 1. Install the board and boot up Windows 2000. 2. At the Found New Hardware Wizard , click Next . 3. Select Search for a suitable driver for my device (recommended) and click Next . 4. Insert the driver CD, check CD-ROM drives , uncheck the other boxes, and click Next .
6 2. At the Found New Hardware Wizard : XP (w/SP1 or earlier)/Server 2003 : continue to step #3. XP (w/SP2 or later)/Server 2003 (w/ SP1 or later) : select No, not at this time , then click Next . 3. Insert the driver CD, select Install the software automatically (Recommended) , and click Next .
7 3. Insert the driver CD, select Install the software automatically (Recommended) , and click Next . 4. Click Finish and restart Windows to complete the installation. To Verify Windows 2000/XP/Server 2003 Installation 1. Right click My Computer and click Manage .
8 Windows Vista (64-bit) For New Installation 1. Install the board and follow Microsoft procedures to install Windows accordingly. 2. At Where do yo want to install Windows? screen, click Load Drivers . 3. Insert the driver CD, click Browse . 4. Double click CD Drive.
9 Windows Server 2008 (32-bit) For New Installation 1. Install the board and follow Microsoft procedures to install Windows Vista accordingly. 2. At the Where do you want to install Windows? , click Load Driver . 3. Insert the driver CD, then click Browse .
10 5. Select Silicon Image SiI... SATALink Controller , then click Next . 6. Follow the on-screen instructions to complete the installation. For Existing Installation 1. Install the board and boot up Windows. 2. At the Found New Hardware Wizard , click Locate and install driver software (recommended) .
11 8. Click Yes , then click Finish to complete. For Existing Installation 1. Install the board and boot up Windows. 2. At the Add New Hardware Wizard , click Next . 3. Select Search for the best driver for your device and click Next . 4. Insert the driver CD, check Specify a location , uncheck the other boxes, type D:9x-Me , then click Next .
12 For Existing Installation 1. Install the board and boot up Windows. 2. At the Add New Hardware Wizard , insert the driver CD. 3. Select Specify the location of the driver (Advanced) , then click Next . 4. Check Specify a location , uncheck the other box, type D:9x-Me , click Next .
13 5. Select Silicon Image... Controller for Windows NT 4.0 and 2000 , and press Enter . 6 . Press Enter to continue and follow on-screen instructions to complete Windows NT4.0 installation. For Existing Installation 1. Install the board and boot up Windows.
14 Bios Configuration The Serial ATA 4-Channel PCI BIOS will appear everytime your system starts up. If the bios doesn't show, please try your controller in another PCI slot. During this (Post) process, the bios will show up and indicate the devices attached to it.
15 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
Serial ATA 4-Channel PCI is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
An important point after buying a device SIIG 04-0322C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 04-0322C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 04-0322C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 04-0322C you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 04-0322C will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 04-0322C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 04-0322C.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 04-0322C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 04-0322C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
