Instruction/ maintenance manual of the product 04-0205F SIIG
Go to page of 8
1 Low Profile USB 2.0 Quick Installation Guide 04-0205F Features and Benefits • Compliant with USB specifications revision 2.0 • Conforms to PCI specifications revision 2.2 • Supports simultaneous operation of multiple high-speed USB 2.0 and USB 1.
2 Package Contents • Low Profile USB 2.0 • Quick Installation Guide Layout Figure 1: Layout Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.
3 3. Remove the slot bracket from an available PCI slot. 4. Carefully align the card to the selected PCI slot, push the board down firmly, but gently, until it is well seated. 5. Replace the slot bracket holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord.
4 2. The drivers show up differently under different versions of Windows. Please refer to the correct Windows version to verify. For Windows 7 / Vista : Under Universal Serial Bus controllers, NEC to PCI Universal Host Controller will be displayed two times and Standard Enhanced PCI to USB Host Controller will be displayed one time.
5 Blank Page.
6 Blank Page.
7 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
Low Profile USB 2.0 is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
An important point after buying a device SIIG 04-0205F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 04-0205F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 04-0205F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 04-0205F you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 04-0205F will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 04-0205F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 04-0205F.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 04-0205F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 04-0205F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
