Instruction/ maintenance manual of the product Force Flow Heaters Sigma
Go to page of 4
M ANUFACTURERS OF H YDRONIC H EATING P RODUCTS Force Flow Heaters Installation and Operation Manual www.sigmaproducts.com Tel: (905) 453 - 0446 Fax: (905) 453 - 0675 Rev 3.
1 G ENERAL N OTES 1. Examine entire unit for damages in shipping upon receipt of the unit. Any shortages or damage should be noted on the carrier's delivery document. After inspection issue a purchase order for necessary parts or contact the factory for r epair or replacement.
2 G ENERAL I NSTALLATION All units are shipped fully assembled. If the unit is a fully or semi - recessed model type then a wall seal trim will be included and must be installed as per the provided instructions. Remove front panel, line up roughed in piping and position the unit in the desired wall or ceiling location.
3 U NIVERSAL F ORCE FLOW C OLLARS A standard trim which is used on any semi - recessed or fully recessed model. Mounted on sight to allow for infinite mounting depth adjustment. Simply mark the depth location of the desired reveal minus 1/2" for the trim thi ckness and fasten the side bars centered with the front edge on the line.
An important point after buying a device Sigma Force Flow Heaters (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sigma Force Flow Heaters yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sigma Force Flow Heaters - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sigma Force Flow Heaters you will learn all the available features of the product, as well as information on its operation. The information that you get Sigma Force Flow Heaters will certainly help you make a decision on the purchase.
If you already are a holder of Sigma Force Flow Heaters, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sigma Force Flow Heaters.
However, one of the most important roles played by the user manual is to help in solving problems with Sigma Force Flow Heaters. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sigma Force Flow Heaters along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
