Instruction/ maintenance manual of the product 290A Axis Communications
Go to page of 8
1 290A Installation In structions Unpacking In the box with the 290A housing you w ill find a small plastic bag containing: No. 1. One large allen key 2.
2 290A Installation Instructions 4. Attach the camera to the ca mera mounting board (7) using the screw attached to the board. Y ou will find a screw hole at the bot tom of the camera. Be fore tightening the screw , position the camera with the board inside the housing (with the lens to the front) and determine the camera’s correct position.
3 290A Installation In structions Installing the housing Recommendation: Keep the housing closed when possibl e during the installation to prevent the build-up of dust and moisture inside the housing. Important: This product should be installed by certif ied electrical technici ans in compliance with local laws and regulations.
4 290A Installation Instructions 6. Now position the widget (1 0) inside the swivel (1 1) with the cables coming through the opening. Match the F and R on the wi dget with the F and R on the swivel, assuring that F remains at the front and R at the back.
5 290A Installation In structions Connecting the camera Warning: Be sure to work inside the housing in dry co nditions. Rain water, moisture and prolonged con- densation inside the housing may caus e serious damage to the camera an d disturb the picture quality when in operation.
Network Power AXIS 211 6 290A Installation Instructions 5. AXIS 2 1 1 - plug the green power connector coming from the 12V DC power supply into the green socket on the camera.
7 290A Installation In structions Completing the installation Caution: The heater at the front of the housing unit beco mes hot when in operation. If ap plicable, position the cable connected from the DC IRIS socket to th e lens so that it does not touch the heater.
8 290A Installation Instructions Maintenance Annual maintenance is required to inspect a ll visible seals for wear and damage. Worn or damaged seals should be replaced. Recommendation: Treat all visible seals with silicone at least once a year to prevent them from drying out and to aid opening and closin g of the housing.
An important point after buying a device Axis Communications 290A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Communications 290A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Communications 290A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Communications 290A you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Communications 290A will certainly help you make a decision on the purchase.
If you already are a holder of Axis Communications 290A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Communications 290A.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Communications 290A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Communications 290A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
