Instruction/ maintenance manual of the product SL2-141-I Siemens
Go to page of 24
Quick Start Guide SIEMENS SL2-141-I ADSL WLAN Router • Do never open the housing! • Use only the power supply pr ovided with this device. • Use only the cables pro vided with this device and do not perform any modifications on them.
2 Before you begin V erify that the following it ems came with your SIEMENS SL2-141-I kit: System Requirements Befor e star ting the installation of the ADSL WL AN Router , make sur e your com puter is equipped with: • L AN inter face (Ethernet) with RJ45 sock et (Windows NT4, 98, ME, 2000, XP , Vista, Mac OS 9.
3 Step 1: Install the ISDN ADSL Splitter The ADSL technology uses the existing t elephone line f or the broadband entrance. With the ISDN installation a ISDN ADSL -Splitter must be installed to separat e the freq uency ranges of ADSL and ISDN and to pr event disturbances at ISDN phones or fax mac hines.
4 Connect the ADSL WLAN Router to the exchange connection 1. Remove the plug on the t elephone or the fax machine fr om the telephone sock et. 2. Insert the ADSL -Splitter into the telephone soc ke t.
5 ADSL cable (gra y) Ethernet cable (y ellow) PC or Not ebook SIEMENS SL2-141-I ADSL WL AN Router 1. 2a. 2b. 3. Step 2: Connect the ADSL WLAN Router via Ethernet interface 1. With your comput er off, plug the end of the ADSL cable (gray) int o the DSL por t of your ADSL WL AN Router .
6 Step 3: USB driver installation The USB driver is only working on the f ollowing operating syst em (OS): Windows 98, Windows 98 SE, Windows ME, Windo ws 2000 and Windows XP . If your ADSL WL AN Router is NO T equipped with an Eht ernet int erface you have t o install first the USB driver in order t o be able to configur e your ADSL WLAN Router .
7 Step 4: Configure the PC (TCP/IP settings) Introduction In step 4, y ou will learn how to configur e your comput er to communicat e with the SIEMENS ADSL WL AN Router . T o do this, you will need to configur e your PC’s netw ork settings t o obtain an IP address auto- matically .
8 1) Choose a T CP/IP entr y whose name contains Ethernet adapter . Do not choose a T CP/IP entr y whose name is PPPoE, VPN or other . 2) If there is no T CP/IP line listed, refer t o the User Manual on your Ae thra CD-ROM to install T CP/IP now . Windows 98 users need the Windows 98 Installation CD to com plet e the installa- tion.
9 3 2 Step 4b: Configure the PC (TCP/IP settings) for Windows NT4 1. Click on Start -> Settings -> Control Panel . Double-click on the Network icon. The Network scr een will appear . 2. Select the Protocol tab and highlight the TCP/IP line . Click on Properties .
10 Step 4c: Configure the PC (TCP/IP settings) for Windows 2000 1. Click on Start -> Settings -> Control Panel . Double-click on the Network and Dial-up Connections icon. The Network scr een will appear . 2. Select the Local Area Connection icon for the applicable Ethernet adap ter (usually it is the first Local Area Connection list ed).
11 Step 4d: Configure the PC (TCP/IP settings) for Windows XP The follo wing instructions assume you ar e running Windows XP’s default interface. If you are using the Classical int er face (where the icons and menus look lik e pre vious Windows ver- sions), please follo w the instructions for Windows 2000 (S tep 4c).
12 Step 4e: Configure the PC (TCP/IP settings) for Windows Vista 1. Click on start -> Control Panel . Click on the Network and Sharing Center icon. Click on Broadband Connections → Properties . 2. The “Local Area Connection S tatus” screen will appear .
13 Step 4f: Configure the PC (TCP/IP settings) for Mac OS 9.x 1. Fr om the Apple Menu, point to Control Panels and then click TCP/IP . 2. Fr om the Connect via pull-down menu select Ethernet built-in . F rom the Configure pull-down menuselect Using DHCP Ser ver .
14 Step 4g: Configure the PC (TCP/IP settings) for Mac OS X 1. Fr om the Apple Menu , select System Preferences... 2. Click on the Network icon in the Internet & Network area. 3. Fr om the Show pull-do wn select Built-in Ethernet . On the T CP/IP tab, select Using DHCP from the Configure pull-down menu.
15 Step 5: Configure the ADSL WLAN Routers (Internet Access) 1. Start your web br owser (e.g. Int ernet Explor er) and type 192.168.1.1 in the addr ess field of the brow ser . Press Enter . Enter in the field <Username> admin and in the field <Passwor d> admin as well and click Next> .
16 The Quick Setup window appears: 4. Be sure, the Auto Scan Internet Connection (PVC) option is select ed. Click Next > . The scanning proces s will be star ted and can take se veral minut es. Afterwards the det ected connection will be displa yed.
17 The Configure Internet Connection - WAN IP Settings window appears: 6. Select Optain an IP address automatically and enable NAT . T ype 1492 in the MTU: field and click Next > . The follo wing window appears: 7. For <PPP User Name> enter the username and f or <PPP Passw ord> the password .
18 8. T ake o ver the settings displa y ed in the Configure LAN side Settings window and click Next > . The L AN configuration will be star ted. 9. The window This Internet Connection - Summary shows the W AN and L AN settings you made. The values must match t o those values you ge t from y our ISP .
19 10. The installation is done and your ADSL WL AN Router will reboo t. This will take about 1-2 minutes. 11. The window Connect to Internet appears. If needed, enter the username and password and click Connect> . The connection to the Int ernet will be established.
20 Step 6: Configure the Wireless LAN (WLAN) of your ADSL WLAN Routers Using radio wav es, a wireles s network intr oduces some security risks which are no t present in a wired ne twork; an unauthorized third party can intercep t transmitted data, gain acces s to your wir eless netw ork.
21 3. Select Wireless Security: WPA-PSK. 4. Select Data Encryption: AES and enter y our ke y (passw ord) in the field Pre-Shared Key: . The choosen k ey must ha ve at least 8 digits, but no t more than 64 digits.
22 Step 7: Front panel system messages The follo wing illustration shows the front panel of the ADSL WLAN Routers: LED Indicators The ADSL WL AN Router is equipped with LEDs on the front panel as desc.
23 s We her eby declar e that the product: SIEMENS ADSL SL2-141 (ADSL2+ Router for PO TS), S1621-Z121- A SIEMENS ADSL SL2-141-I (ADSL2+ Router for ISDN), S1621-Z120-A (Name of product, type or model, batch or serial number) is in conformity with the f ollowing standards: ETSI EN 300 328 V1.
24.
An important point after buying a device Siemens SL2-141-I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens SL2-141-I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens SL2-141-I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens SL2-141-I you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens SL2-141-I will certainly help you make a decision on the purchase.
If you already are a holder of Siemens SL2-141-I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens SL2-141-I.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens SL2-141-I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens SL2-141-I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
