Instruction/ maintenance manual of the product SC9000 Siemens
Go to page of 4
DU-DR-0016-SC9000 Rev A 6/4/02 GCX Corp. Page 1 of 4 GCX Mounting Assembly Operation/Installation Manual Dräger Model Cato ® with Siemens SC9 000 Patient Monitor Patient Monitor – Left Side on Pivot Arm / Po wer Supply on Right Side The purpose of these instructions is to: 1.
DU-DR-0016-SC9000 Rev A 6/4/02 GCX Corp. Page 2 of 4 Install M Series Arm 1. The Slide has (2) ¼-20 x ¾” SHSS set screws that, when tightened, secu re the Arm at the desired location within the Channel. 2. While supporting the bottom of the Arm with one h and, gui de the Slide (at the rear of the arm) into the top of the Channel.
DU-DR-0016-SC9000 Rev A 6/4/02 GCX Corp. Page 3 of 4 INSTRUCTIONS FOR USE – M Series Pivot Arm Pivot 1. To pivot the Arm (near the wall), simply push on the side of the Arm or mount ed device. 2. To adjust the pivot tension at the Slide, use a ½” (or 13mm) socket driver to tighten or loosen the Pivot Tension Bolt to obtain the desired tension.
DU-DR-0016-SC9000 Rev A 6/4/02 GCX Corp. Page 4 of 4 Cleaning 1. The mounting assembly may be cleaned with most mild, non-ab rasive solutions commonly used in the hospital environment (e.
An important point after buying a device Siemens SC9000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens SC9000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens SC9000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens SC9000 you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens SC9000 will certainly help you make a decision on the purchase.
If you already are a holder of Siemens SC9000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens SC9000.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens SC9000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens SC9000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
