Instruction/ maintenance manual of the product OpenAir GND Series Siemens
Go to page of 7
Technical Instructions Document No. 155-746 EA GND-1 March 17, 2005 OpenAir™ GND Series Electronic Damper Actuator UL Listed Fire/Smoke and Smoke Control Dampers 2-Position, 15-second Run Time, 15-s.
Technical Instructions OpenAir GND Series Electronic Damper Actuator UL Listed F ire/Smoke Control Dampers Document No. 155-746 March 17, 2005 Product Numbers G Direct-coupled Electronic F ire and Smo.
OpenAir GND Series Electronic Damper Actuator UL List ed Fire/Smoke Control Damper s Technical Instructions Document No. 155-746 March 17, 2005 Specifications Power supply Operating voltage 24 Vac ±2.
Technical Instructions OpenAir GND Series Electronic Damper Actuator UL Listed F ire/Smoke Control Dampers Document No. 155-746 March 17, 2005 Accessories EA1 127R1 Figure 1. Electronic Fusible Link (EFL) ASK79.165 (165°F (74°C) operation) ASK79.212 (212°F (100°C) ope ration) ASK79.
OpenAir GND Series Electronic Damper Actuator UL List ed Fire/Smoke Control Damper s Technical Instructions Document No. 155-746 March 17, 2005 Wiring All wiring must conform to NEC and local codes and regulations.
Technical Instructions OpenAir GND Series Electronic Damper Actuator UL Listed F ire/Smoke Control Dampers Document No. 155-746 March 17, 2005 Wiring, Continued NOTE: When or dered, GN D Electronic Fusible Link models come pre-wired for coupling with EFL sensor .
OpenAir GND Series Electronic Damper Actuator UL List ed Fire/Smoke Control Damper s Technical Instructions Document No. 155-746 March 17, 2005 Information in this publication is based on current specifications. The company reserves the right to make changes in specifica tions and models as design improvements are introduced.
An important point after buying a device Siemens OpenAir GND Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens OpenAir GND Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens OpenAir GND Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens OpenAir GND Series you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens OpenAir GND Series will certainly help you make a decision on the purchase.
If you already are a holder of Siemens OpenAir GND Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens OpenAir GND Series.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens OpenAir GND Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens OpenAir GND Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
