Instruction/ maintenance manual of the product OC130S Siemens
Go to page of 11
E Siemens OC130S Installation Instructions: Before you begin: Ensure you have an update copy of your Operating system inclu ding Direct X8.1 or higher. You can download this update free of charge from Microsoft at the following links. C lick here for Windows 98/ME or cli ck here for Windows 2000/XP to download the latest version.
E Step 4: Configure the Siemens OC130S software to use the IPP Phone. 1. Open the Settings Panel for the OC 130 and cli ck on the ManagerModules tab. 2. Change the Accept Audio Conne ction to use the F10 key and the Disconnect Audio Connection to use the F11 key.
E 4. Audio Setup – make sure you choo se the IPP device as shown below. 5. Set the Voice Channel of the Default Devi ce to the Eutectics dev ice id (IPP400 or any of the IPP Internet Power Phone devices). On Windows 2 000, ME or 98 this will be USB Audio rather than a specific device name.
E Page 4 06/17/2010.
E 8. OPTIONAL – if you have an IPP520 USB Speakerphone and you woul d like to access HOLD and TRANSFER functio ns u sing the Hold and Transfer Keys on the IPP520 there is a specific Dialog calle d the Personal Keypad that must be setup and active.
E Using the Phone Using the Siemens OC130 S with the Eutectics I PP phone is very simple. To place a call, just lift up the handset. You will automatically cause the OC130S to pop up and you will get a dialtone. To dial you can use either the ke ypad on the phone or the keyboard of the PC.
E In the Audio tab - choose the SOUNDCARD device as the PLAYBACK (so your normal PC sounds will come from the Speakers of the PC) Also check th e Use Only Default Dev ices box in the lower left corner.
E In the Voice tab choose the Eutectics Device (IPP200 in the abov e example ) as the Playback and Recording - also clic k on th e Volume Button and adjust the master volume to the highest level (you can make it lower later if desired). The Sound Levels adjustment is co mplete – you can close the dialog.
E Vista or Windows 7 Users Windows Vista has some additional setti ngs required for proper operation of the Eutectics Devices. The microphone device must be confi gured as default STEREO capture mode. Using the dialog below – please select the Default Format as 2 channel, 16 bit in shared mode.
E Windows 7 Microphone Properties: Page 10 06/17/2010.
E Also the Setting of the IPP device as the Default Communications device should be verified as shown below: Page 11 06/17/2010.
An important point after buying a device Siemens OC130S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens OC130S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens OC130S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens OC130S you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens OC130S will certainly help you make a decision on the purchase.
If you already are a holder of Siemens OC130S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens OC130S.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens OC130S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens OC130S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
