Instruction/ maintenance manual of the product IPC427C Siemens
Go to page of 170
SIMATIC Industrial PC SIMATIC IPC427C _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ _____________ _ .
Legal information Legal information Warning notice system This manual contains notices y ou have to ob serve in order to en sur e your personal safety, as well as to prevent damage to property.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 3 Table of contents 1 Introduct ion ................................................. ............................................................... ................................ 7 1.
Table of contents SIMATIC IPC427C 4 Operating Instructions, 04/2009, A5E02414743 -01 7 Commiss ioning ................................................ ............................................................... ......................... 37 7.1 Note before commissioning.
Table of contents SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 5 11.2.2.2 Restoring the Software to Factory State Using the Rest ore DVD ............................................... 77 11.2.2.3 Setting up the operating system via the Recovery CD/DV D .
Table of contents SIMATIC IPC427C 6 Operating Instructions, 04/2009, A5E02414743 -01 16.1.4.2 Compact Flash card interface .......................... ............................................................... .......... 111 16.1.4.3 PCI-104 or PC/104-P lus interface (PCI part) .
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 7 Introduction 1 1.1 Preface Objective of this documentation These operating instructions con tain all the information you n e ed for commissioning and operation of the SIMATIC IPC427C.
Introduction 1.2 Guideline to the Operating Instru ctions SIMATIC IPC427C 8 Operating Instructions, 04/2009, A5E02414743 -01 1.2 Guideline to the Operating Instructions Contents format T able of Conte.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 9 Safety Instructions 2 2.1 General safety instructions CAUTION Please observe the safety instr uctions on the back of the cover sheet of this documentation. You should not expand your de vice unless you have read the relevant safety instructions.
Safety Instructions 2.1 General safety instructions SIMATIC IPC427C 10 Operating Instructions, 04/2009, A5E02414743-01 Battery This device is equipped with a Lithium battery. Batteri es may o nly be replaced by qualified personnel. CAUTION There is the risk of an explosio n if the battery is not replace d as directed.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 11 Description 3 3.1 Overview The SIMATIC IPC427C provides high -level industrial p erformance.
Description 3.2 Applications SIMATIC IPC427C 12 Operating Instructions, 04/2009, A5E02414743-01 3.2 Applications The device provides industrial PC systems for hig h-performance and space-saving applic.
Description 3.3 Features SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 13 3.3 Features Basic data Installation / mounting • Installation on a DIN rail • Wall mounting • Vertical mountin • Hanging assembly Processor • Intel Celeron M 1.
Description 3.3 Features SIMATIC IPC427C 14 Operating Instructions, 04/2009, A5E02414743-01 Basic data Ports Serial COM1 (RS232) COM2 (RS232); optional Graphics DVI-I: combined DVI and VGA USB 4 x USB 2.
Description 3.4 Windows Embedded Standard 20 09 SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 15 3.4 Windows Embedded Standard 2009 The supplied Windows Embedd ed St andard has the product versi on 2009.
Description 3.4 Windows Embedded Standard 20 09 SIMATIC IPC427C 16 Operating Instructions, 04/2009, A5E02414743-01 Function Hard disk / SSD version Compact Flash card vers ion CoDevice Installer Available Available Windows Movie Maker Available V 2.1 Not available Media Player Available, V11.
Description 3.5 Design SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 17 3.5 Design 3.5.1 External Design Device components Pos Description ① Cover plate for Compact Flash modu le .
Description 3.5 Design SIMATIC IPC427C 18 Operating Instructions, 04/2009, A5E02414743-01 3.5.2 Connection components Ports and power supply Location of connection elements (v ersion with PROFIBUS or .
Description 3.5 Design SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 19 3.5.3 Operator controls On/Off switch CAUTION The On/Off switch does not di sconnect the devi ce from the suppl y voltage.
Description 3.5 Design SIMATIC IPC427C 20 Operating Instructions, 04/2009, A5E02414743-01 3.5.4 Status displays Status displays LED Meaning LE D Description PWR Power supply OFF GREEN Standby mode Sup.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 21 Application planning 4 4.1 Transport Despite the device' s rugged design, its internal com ponents are sensitive to severe vibrations or shock. You must t herefore protect the device from severe mechani cal stress when transporting it.
Application planning 4.2 Unpacking and checking the deli very unit SIMATIC IPC427C 22 Operating Instructions, 04/2009, A5E02414743-01 4.2 Unpacking and checking the delivery unit Unpacking the device Note the following when unpacking the unit: ● It is advisable not to dispose of t he original pack ing material .
Application planning 4.2 Unpacking and checking the deli very unit SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 23 ● Ethernet address: The Ethernet address of the device is availab le in your BIOS Setup (F2 function key) under Main > Hardw are Options > Ethernet 1 Address or Ethernet 2 Address .
Application planning 4.3 Ambient and Environmental Condi tions SIMATIC IPC427C 24 Operating Instructions, 04/2009, A5E02414743-01 4.3 Ambient and Environmental Conditions When you plan your project, y.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 25 Installing/mounting 5 5.1 Permitted mounting positions NOTICE The device is approved for operation in closed rooms only.
Installing/mounting 5.1 Permitted mounting positions SIMATIC IPC427C 26 Operating Instructions, 04/2009, A5E02414743-01 Suspended Operation with CompactFlash card and/or SSD drive and without expansion modules: 0 to +40°C Note : Mounting brackets are required if the device is suspended.
Installing/mounting 5.2 Mounting information SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 27 5.2 Mounting information Before you install the device, r ead the following mounting inst ructions.
Installing/mounting 5.4 Mounting on DIN rails SIMATIC IPC427C 28 Operating Instructions, 04/2009, A5E02414743-01 5.4 Mounting on DIN rails Mounting the device on DIN rails Note Use of Siemens 35 mm standard mounting rail is re commended. Steps for mounti ng on DIN rails 1.
Installing/mounting 5.4 Mounting on DIN rails SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 29 NOTICE The rails are secured to a wall or cabine t similar to mounting with mounting brackets.
Installing/mounting 5.5 Mounting with mounting brackets SIMATIC IPC427C 30 Operating Instructions, 04/2009, A5E02414743-01 5.5 Mounting with mounting brackets Removing mounting clamps from the device Two mounting clamps are factory installed on the device for DIN rail mounting.
Installing/mounting 5.5 Mounting with mounting brackets SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 31 Mounting/demounting the device The dimensions of the devi ce with mounting brackets are liste d under Dimension d rawings of the device with mounting brackets (Page 99).
Installing/mounting 5.6 Upright mounting SIMATIC IPC427C 32 Operating Instructions, 04/2009, A5E02414743-01 5.6 Upright mounting With the available optional vertical mounting kit you h ave the possibility to implement a place saving installation.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 33 Connecting 6 6.1 Connecting peripheral equipment NOTICE Connect only perip heral devices approved for industri al applica tions conforming to EN 61000-6-2 / IEC 61000-6-2. Note Hot-plug peripherals (USB) may be connected whil e the PC is in operation.
Connectin g 6.2 Connecting the 24 V DC power supply SIMATIC IPC427C 34 Operating Instructions, 04/2009, A5E02414743-01 6.2 Connecting the 24 V DC power supply To be noted before you connect the device.
Connectin g 6.3 Protective ground co nnection SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 35 6.3 Protective ground connection The PE terminal (M4 thread) on t he device (large surface, large -area co ntact) must be connected to the PE conductor on the cabinet or system in which the PC is to be installed.
Connectin g 6.4 USB strain-relief SIMATIC IPC427C 36 Operating Instructions, 04/2009, A5E02414743-01 6.4 USB strain-relief The USB strain-relief provided as an accessory is u sed to preve nt accidental loosening of the USB cable from the device. A cable binder (not includ ed in the package) is neede d to use this accessory .
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 37 Commissioning 7 7.1 Note before commissioning Factory state The SIMATIC IPC427C is availabl e in the followi ng versions: ● With t.
Commissioning 7.2 Commissioning - Wind ows Embed ded Standard 2009 SIMATIC IPC427C 38 Operating Instructions, 04/2009, A5E02414743-01 7.2 Commissioning - Windows Embedded Standard 2009 7.2.1 Basic commissioning - initial startup Requirements ● The device is connected to the 24 VDC power supply.
Commissioning 7.2 Commissioning - Wind ows Embedded Standard 2009 SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 39 Switch off the device When you work with W indows Embedded Standar d , always shut down the PC with the command Start > Shut Down .
Commissioning 7.3 Commissioning - Wi nd ows XP Professional SIMATIC IPC427C 40 Operating Instructions, 04/2009, A5E02414743-01 7.3 Commissioning - Windows XP Professional 7.3.1 Basic commissioning - initial startup Requirements ● The device is connected to the 24 VDC power supply.
Commissioning 7.3 Commissioning - Wind ows XP Professional SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 41 Switch off the device When you w ork with W indows XP Pr ofessional, always shut down th e PC with the command Start > Shut Down .
Commissioning 7.4 Commissioning - ot her operating systems SIMATIC IPC427C 42 Operating Instructions, 04/2009, A5E02414743-01 7.4 Commissioning - other operating systems 7.4.1 Commissioning - guide The desired operating system c an be installed on the hard disk, CompactFlash card or SSD drive.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 43 Integration into an Automation System 8 8.1 Overview Options of integration in existing or planned system environm en ts/networks: E.
Integration into an Automation System 8.1 Overview SIMATIC IPC427C 44 Operating Instructions, 04/2009, A5E02414743-01.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 45 Functions 9 9.1 Monitoring Functions 9.1.1 Introduction Even in its basic version, the device com es with optional monit oring functions.
Functions 9.1 Monitoring Functions SIMATIC IPC427C 46 Operating Instructions, 04/2009, A5E02414743-01 9.1.2 Temperature monitoring/display Temperature monitoring The temperature is recorded by means of three thermocouples.
Functions 9.1 Monitoring Functions SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 47 9.1.3 Watchdog (WD) Function If the user program does not res pond to the watchdog within the predetermined monitoring time, the watchdog monitors the program pro cess and informs the user about various reactions.
Functions 9.2 Enhanced Write Filter (EWF) SIMATIC IPC427C 48 Operating Instructions, 04/2009, A5E02414743-01 9.2 Enhanced Write Filter (EWF) Purpose and function The EWF (Enhanced Write Filter) is a function that is only avai lable with Windows Embedded operatin g systems.
Functions 9.2 Enhanced Write Filter (EWF) SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 49 Special features for the use of Enhanced Write Filters (EWF) ● In the event of a power failure , if the EWF is enabled changes made after the boot sequence on drive C: are lost.
Functions 9.3 File Based Write Filter (FBWF) SIMATIC IPC427C 50 Operating Instructions, 04/2009, A5E02414743-01 9.3 File Based Write Filter (FBWF) Purpose and function With the Feature Pack 2007 for Windows XP Embedded, Microsoft i ntroduced a second write filter, File Based Write Filter (FBWF).
Functions 9.3 File Based Write Filter (FBWF) SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 51 Function Command Display the current FBWF status fbwfmgr /displayconfig Enable FBWF after the next startup fbwfmgr /enable Write to protected files fbwfmgr /commit c: Test.
Functions 9.4 SRAM buffer memory SIMATIC IPC427C 52 Operating Instructions, 04/2009, A5E02414743-01 9.4 SRAM buffer memory For applications to be able to s tore data following a power fai lure, the motherboard features a battery-buffered CMOS-RAM. If t he supply voltage fails longer than 5 ms, this is indicated by the DC FAIL signal.
Functions 9.5 Battery monitoring SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 53 9.5 Battery monitoring The installed buffer battery has a service life of at least 5 y ears. The status can be checked with two-tier battery monitoring .
Functions 9.6 Operation without monitor and keyboard SIMATIC IPC427C 54 Operating Instructions, 04/2009, A5E02414743-01 9.6 Operation without monitor and keyboard The device can be operated withou t a monitor and keyboard. The device startup is guaranteed without these peripherals.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 55 Expansions and Configurations 10 10.1 Open the device (front panel) CAUTION Work on the open devi ce may onl y be carried out by authori zed a nd qualified personnel. Within the warranty time, you are only allowed to install expan sions for memory and expansion card mod ules.
Expansions and Configurations 10.1 Open the device (fron t panel) SIMATIC IPC427C 56 Operating Instructions, 04/2009, A5E02414743-01 Open the device Steps in openi ng the device (front panel) 1 Remove the six screws.
Expansions and Co nfigurations 10.2 Memory expan sion SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 57 10.2 Memory expansion 10.2.1 Installing the memory module Memory expansion options The motherboard is equipped with one slot for an SO-DIMM DDR3 m emory module.
Expansions and Configurations 10.2 Memory expan sion SIMATIC IPC427C 58 Operating Instructions, 04/2009, A5E02414743-01 Installing a memory module How to install a memory module 1 Set the memory module in the mount tilting forward. 2 Carefully push the memory modu le back into the heat sink until it fully engages.
Expansions and Co nfigurations 10.3 Installing PCI-10 4 / PC/104 Plus modules SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 59 10.3 Installing PCI-104 / PC/104 Plus modules 10.
Expansions and Configurations 10.3 Installing PCI-10 4 / PC/104 Plus modules SIMATIC IPC427C 60 Operating Instructions, 04/2009, A5E02414743-01 10.3.2 Mounting PCI-104 or PC/104 Plus modules Tools Use hexagon head screws (5 mm) to mount the spacing bolts of th e PCI-104- or PC/104- Plus module.
Expansions and Co nfigurations 10.3 Installing -104 / PC/104 Plus modules SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 61 Steps for mountin g an expan sion module 3 Secure the module with four screws or spacing bolts. 4 Mount the expansion frame ② and secure it with six spacing bolts.
Expansions and Configurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C 62 Operating Instructions, 04/2009, A5E02414743-01 10.4 Installing/Removing Compact Flash Cards 10.4.1 Installation options fo r Compact Flash cards Memory expansion options The device features an accessib le slot for Compact Flash cards (types I / II).
Expansions and Co nfigurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 63 10.4.2 Installing/removing an accessible Compact Flash card Preparation Disconnect the device from the power supply.
Expansions and Configurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C 64 Operating Instructions, 04/2009, A5E02414743-01 Installing the Compact Flash card Steps for installing a Compact Flash card 1 Open the module receptacle. 2 Insert the CompactFlash card with the connector facing in until it locks into place ①.
Expansions and Co nfigurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 65 Removing the Compact Flash card Steps for removing a Com pact Flash card 1 Open the module receptacle. 2 Press the eject button ① and remove the CompactFlash card.
Expansions and Configurations 10.4 Installing/Removing Compact Flash Cards SIMATIC IPC427C 66 Operating Instructions, 04/2009, A5E02414743-01 10.4.3 Installing/removing a built-in Compact Flash card S.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 67 Maintenance and Service 11 11.1 Removing and Installing Hardware Components 11.1.1 Repairs Carrying out repairs Only authorized personnel are permitted to repair the device.
Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C 68 Operating Instructions, 04/2009, A5E02414743-01 Tools ● Torx T8 (cover and upper sheet metal cover) ● Torx T10 (hard disk mounting) ● Torx T20 (Protective earth terminal) ● Hexagon head 5mm (spa cing bolts PC/104) 11.
Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 69 11.1.3 Replacing hard di sk or SSD drive CAUTION Drives may only be replaced by a uthorized qualified personnel.
Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C 70 Operating Instructions, 04/2009, A5E02414743-01 How to remove a drive 2 Remove the four screws holding the drive to the back of the enclosure. 3 Carefully remove the drive from the enclosure.
Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 71 11.1.4 Replace the backup battery To be noted before you replace the battery Note The service life of a backup batte ry is approximately 5 - 8 ye a rs, depending on the operating conditions.
Maintenance and Service 11.1 Removing and Install ing Hardware Components SIMATIC IPC427C 72 Operating Instructions, 04/2009, A5E02414743-01 Replacing the battery Proceed as follows: Steps for replacing the battery 1 Open the battery compartment. 2 Remove the battery holder.
Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 73 11.2 Reinstalling the operating system 11.2.1 Windows Embedded Standard 2009 11.2.1.1 General installation procedure If your software becomes corrup t for any reason, you c an reinst all it from the Restore CD/ DVD.
Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C 74 Operating Instructions, 04/2009, A5E02414743-01 11.2.1.2 Restoring the software to factory state using the Restore DVD You can restore the origin al fact ory software using the Restore CD/DVD.
Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 75 4. Close the BIOS setup with the "Exit Saving Changes" entry.
Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C 76 Operating Instructions, 04/2009, A5E02414743-01 11.2.2 Windows XP Professional 11.
Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 77 11.2.2.2 Restoring the Software to Factory State Using the Restore DVD You can reinstall the original factory software (included in th e Windows XP Professional product package) using the Restor e DV D.
Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C 78 Operating Instructions, 04/2009, A5E02414743-01 Setting up the language selection for Windows XP Professional / Embed.
Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 79 11.2.2.3 Setting up the operating system via the Recovery CD/DVD Use the supplied Reco very CD/ DV D to install Windows to suit you r particular requirements.
Maintenance and Service 11.2 Reinstalling t he operating system SIMATIC IPC427C 80 Operating Instructions, 04/2009, A5E02414743-01 Installation of the operating system Follow the on-screen instructions when the "Windows XP Professi onal Setup" window appears.
Maintenance and Service 11.3 Partitioning data media SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 81 11.3 Partitioning data media 11.
Maintenance and Service 11.3 Partitioning data media SIMATIC IPC427C 82 Operating Instructions, 04/2009, A5E02414743-01 11.3.2 Setting up the partitions un der Windows XP Pr ofessional You need to set up the partitions on the CompactFlash card afte r installing a new drive, to repair corrupt partitions or to change the partitioning.
Maintenance and Service 11.4 Installing drivers and software SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 83 11.4 Installing drivers and software 11.
Maintenance and Service 11.5 Installing updates SIMATIC IPC427C 84 Operating Instructions, 04/2009, A5E02414743-01 11.5 Installing updates 11.5.1 Updating the operating system Windows The latest updates for the Window s operating system are availab le on the Internet at Microsoft Side Guide ( http://www.
Maintenance and Service 11.5 Installing updates SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 85 11.5.3 Performing a BIOS update Download from BIOS update Check regularly if updates are available for download to your d evice. You can find the downloads in the Intern et ( http://www.
Maintenance and Service 11.6 Data backup SIMATIC IPC427C 86 Operating Instructions, 04/2009, A5E02414743-01 11.6 Data backup 11.6.1 Creating an image Data backup under Windows Embedded Standard 2009 /.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 87 Alarm, error and system messages 12 12.1 Boot error messages During startup (the boot process ), the BIOS first performs a P ower O n S elf T est (POST) and checks whether certain functional units of the PC are operating error-free.
Alarm, error and system messages 12.1 Boot error messages SIMATIC IPC427C 88 Operating Instructions, 04/2009, A5E02414743-01.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 89 Troubleshooting/FAQs 13 13.1 General problems This chapter provide s you with ti ps on how to locate and troubl eshoot common probl ems. Problem Possible cause To correct or avoid error The device is not operational.
Troubleshooting/FAQs 13.2 Problems when using modules of third-party manufacturers SIMATIC IPC427C 90 Operating Instructions, 04/2009, A5E02414743-01 13.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 91 Technical specifications 14 14.1 General specifications General specifications Order numbers see the order documents Dimensions 262x142x47 ( WxHxD in mm) Weight Approximately 2 kg Supply voltage (DC) 24 VDC 1 (19.
Technical specifications 14.1 General specifications SIMATIC IPC427C 92 Operating Instructions, 04/2009, A5E02414743-01 General specifications Climatic Conditi ons Temperature Tested a ccording to IEC.
Technical specifications 14.1 General specifications SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 93 General specifications Mech. Ambient conditions Vibration Tested to DIN IEC 60068-2-6 - Operation with CompactFlash c ard 5 to 9 Hz: 3.
Technical specifications 14.1 General specifications SIMATIC IPC427C 94 Operating Instructions, 04/2009, A5E02414743-01 General specifications Ports COM1; COM2 (optional) RS232 , max. 115 Kbps., 9-pin Cannon, ma le VGA/DVI VGA integrated in the DVI-I Keyboard USB support Mouse USB support USB 4x USB 2.
Technical specifications 14.2 Power requireme nts of the components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 95 14.2 Power requirements of the components Maximum power consumption of the auxiliary components Auxiliary components Maximum permitted power consumption Max.
Technical specifications 14.3 Integrated DC power sup ply SIMATIC IPC427C 96 Operating Instructions, 04/2009, A5E02414743-01 14.3 Integrated DC power supply Technical specifications Input voltage 24 VDC (1 9.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 97 Dimension drawings 15 15.1 Overview of the dimensional drawings This section contains the following dimension dra wings: ● Dimensi.
Dimension drawings 15.2 Dimension drawings of the device SIMATIC IPC427C 98 Operating Instructions, 04/2009, A5E02414743-01 15.2 Dimension drawings of the device Figure .
Dimension drawings 15.3 Dimension drawings of the device with mounting brackets SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 99 15.
Dimension drawings 15.3 Dimension drawings of the device with mounting brackets SIMATIC IPC427C 100 Operating Instructions, 04/2009, A5E02414743-01 .
Dimension drawings 15.4 Dimensional drawings of t he device with vertical mounting angles SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 101 15.
Dimension drawings 15.5 Dimensional drawings of the device with expansion frames SIMATIC IPC427C 102 Operating Instructions, 04/2009, A5E02414743-01 15.
Dimension drawings 15.6 Dimension drawing of the blanki ng plate SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 103 15.6 Dimension drawing of the blanking plate .
Dimension drawings 15.6 Dimension drawing of the blanki ng plate SIMATIC IPC427C 104 Operating Instructions, 04/2009, A5E02414743-01.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 105 Detailed descriptions 16 16.1 Internal components 16.1.1 Overview of internal components The basic com ponents of the device are .
Detailed descriptions 16.1 Internal components SIMATIC IPC427C 106 Operating Instructions, 04/2009, A5E02414743-01 16.1.2 Technical features of the motherboard Component / port Description Param eters Chipset Intel GM45+ICH-9m BIOS Insyde H20... CPU Intel Celeron M Inter Pentium Core 2 Solo Intel Pentium Core 2 Duo 1.
Detailed descriptions 16.1 Internal components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 107 16.1.3 External ports 16.1.3.1 Overview Port Position De scription COM1; COM2 (optional) externa l 9-pin male V24 USB external Four USB channels 4 x high current USB 1.
Detailed descriptions 16.1 Internal components SIMATIC IPC427C 108 Operating Instructions, 04/2009, A5E02414743-01 16.1.3.3 DVI-I DV-I port, standard socket Pin no.
Detailed descriptions 16.1 Internal components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 109 16.1.3.4 Ethernet Ethernet RJ45 connection /(' /(' Pin no.
Detailed descriptions 16.1 Internal components SIMATIC IPC427C 110 Operating Instructions, 04/2009, A5E02414743-01 16.1.3.6 PROFIBUS PROFIBUS interface , 9-pin (socket) Pin no.
Detailed descriptions 16.1 Internal components SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 111 16.1.4 Internal ports 16.1.4.1 Overview Port Po sition Connector Description Compact Flash card (True IDE mode) Internal X3 50-pin CF socket, types I / II PCI -104 Internal PCI interface 16.
Detailed descriptions 16.1 Internal components SIMATIC IPC427C 112 Operating Instructions, 04/2009, A5E02414743-01 16.1.4.3 PCI-104 or PC/104-Plus interface (PCI part) PCI-104 or PCI part of the PC /104-Plus interface, X7 Pin no.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 113 16.2 BIOS Setup 16.2.1 Overview BIOS Setup program BIOS Setup program is stored in ROM BIOS. System configuration data are stored in battery-backed RAM of the device.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 114 Operating Instructions, 04/2009, A5E02414743-01 16.2.2 Starting BIOS Setup Starting BIOS Setup Start the setup program as follows: 1. Reset the device (warm or cold restart). In the figures shown, the default settings differ based on the device versions.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 115 16.2.3 BIOS Setup menus The various menu s and submenus a re listed on the next pages. Yo u can obtain information on the selected SETUP item from t he "Item-specific help" part o f the respective menu.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 116 Operating Instructions, 04/2009, A5E02414743-01 Menu layout The screen is divided into four s ections. In the top section ②, you can select the subm enus [Main] [Advanced] [Security] [Boot] [Version] [Exit].
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 117 16.2.4 Main menu Figure 16-3 Main menu Settings in the main menu In the main menu, you can mo.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 118 Operating Instructions, 04/2009, A5E02414743-01 System time and date System Time and System Date indi cate the current va lues. Once y ou have selected the appropriate option, you ca n use the [+] and [-] k eys to modify the time setting Hour: Minute: Second and for the date Month/Day/Year .
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 119 "Boot Options" submenu Figure 16-5 "Boo t Options" submenu Quick Boot Mode Some hardware tests are skipped to speed up the bo ot sequence.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 120 Operating Instructions, 04/2009, A5E02414743-01 "Keyboard Features" submenu Figure 16-6 "Keyboard Fea tures" submenu On Numlock Off Switches Numlock on or o ff following power on.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 121 "Hardware Options" submenu Figure 16-7 "Hardware Options" fiel d The parameters of the interfaces p resent on the motherboard are set here.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 122 Operating Instructions, 04/2009, A5E02414743-01 16.2.5 Advanced Menu Menu layout Figure 16-8 Advanced Me nu Settings in the Advanced Menu Disa.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 123 "IO Device Configuration" submenu Figure 16-9 "IO Device Co nfiguration" submenu Disabled COM 1 or COM 2 is always disable d.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 124 Operating Instructions, 04/2009, A5E02414743-01 "SATA Configuration" submenu Figure 16-10 "SATA Configuration" submen u SATA Controller [Enabled] [Disabled] Disables or enables t he SATA controller [Enhanced] Serial ATA Por ts 0/1 work in Legacy Mode.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 125 16.2.6 Security menu You can only edit the fields enc losed in square brackets. Two p asswords can be assi gned to protect your PC from unauthori z ed use.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 126 Operating Instructions, 04/2009, A5E02414743-01 16.2.7 Boot menu This menu allows you to assign a priority for the boot devices.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 127 Legacy Specifies the boot sequence for boot devices with Leg acy operat ing system s.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 128 Operating Instructions, 04/2009, A5E02414743-01 Figure 16-14 "Boot Type Order" field This screen shows all possibl e legacy boot ty pes. The boot type with highest boot priority is shown at the top.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 129 Note You can open the Boot menu and select the boot volume by pressi ng the ESC key during system st artup.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 130 Operating Instructions, 04/2009, A5E02414743-01 16.2.8 Version menu Keep this information at hand i f customer support has t echnical questions about your system.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 131 16.2.9 Exit Menu You always exit BIOS Setup in this menu. Figure 16-16 Exit menu Exit Saving Changes All cha nges a re saved and the system is res tarted with the new parameters.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 132 Operating Instructions, 04/2009, A5E02414743-01 16.2.10 Default BIOS Setup entries Documenting your device configuration If you have changed any default settings in Setup, you can ente r them in the following table.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 133 Hardware Options On-board Ethernet 2 Enabled Ethernet 2 Address 00.
Detailed descriptions 16.2 BIOS Setup SIMATIC IPC427C 134 Operating Instructions, 04/2009, A5E02414743-01 Version SIMATIC PC IPC427C PROFIBUS BIOS Version V12.01.xx BIOS Number A5E02316088-ES0xx InsideH20 Version Mont evina.03.56.37.20xx MPI / DP Firmware ID xx FPGA Revision ID xx Processor Type Intel® Core™2 Duo CPU U9300 @ 1.
Detailed descriptions 16.3 System resources SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 135 16.3 System resources 16.3.1 Currently allocated system resources All system re sources.
Detailed descriptions 16.3 System resources SIMATIC IPC427C 136 Operating Instructions, 04/2009, A5E02414743-01 16.3.2 System resources used by the BIOS/DOS The following tables and picture s describe the system resources for the factory state of the device.
Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 137 16.4 I/O Address Areas 16.4.1 Overview of the internal module registers Overview of th.
Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C 138 Operating Instructions, 04/2009, A5E02414743-01 16.4.2 Watchdog enable regis ter / 066h select register (read/write, ad dress 062h) Mea.
Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 139 16.4.4 CAN base address register ( write only, address 066h) A 512 byte window is created in the I/O area for the CAN controller (Philips SJA1000).
Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C 140 Operating Instructions, 04/2009, A5E02414743-01 16.4.5 Output register LED 1 / 2 (read/write, address 404Eh) Meaning of the bits Output.
Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 141 16.4.6 Battery status tab (r ead-only, address 50Fh) The status of the CMOS battery i s monitored; the status (two-tier) can be read from the battery status register.
Detailed descriptions 16.4 I/O Address Areas SIMATIC IPC427C 142 Operating Instructions, 04/2009, A5E02414743-01 16.4.7 SRAM address register The battery-buffered SRAM uses a 2 MB memory ad dress area, whic h can be read via the PCI register.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 143 Appendix A A.1 Guidelines and declarations Notes on the CE Label The following applies to the SI MATIC product described in this do.
Appendix A.2 Certificates and appro vals SIMATIC IPC427C 144 Operating Instructions, 04/2009, A5E02414743-01 A.2 Certificates and approvals DIN ISO 9001 certificate The Siemens quality management system for all prod uction proces ses (development, production and sales) meet s DIN ISO 9001:2000 requireme nts.
Appendix A.2 Certificates and appro vals SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 145 CANADA Canadian Notice T his Class A digi tal apparatus complies with Ca nadian ICES-003. Avis Canadian Cet appareil numérique de la classe B est conform e à la n orme NMB-003 du Canada.
Appendix A.3 Service and support SIMATIC IPC427C 146 Operating Instructions, 04/2009, A5E02414743-01 A.3 Service and support Local information Contain your S iemens representative ( http://www.siemens. com/automation/partner ) if you have questions about the product s described here.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 147 ESD guidelines B B.1 ESD Guidelines Definition of ESD All electronic modules are equipped with large-scale integrated ICs or components. Due to their design, these electronic elements are highly sensitive to overvoltage, and thus to any electrostatic discharge.
ESD guidelines B.1 ESD Guidelines SIMATIC IPC427C 148 Operating Instructions, 04/2009, A5E02414743-01 Electrostatic charging Anyone who is not connected to t he electrical potential of thei r surroundings can be electrostatically charg ed.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 149 List of abbreviations C C.1 Abbreviations Abbreviation Term M eaning AC Alternating current Alternating current ACPI Advanced Con f.
List of abbreviations C.1 Abbreviations SIMATIC IPC427C 150 Operating Instructions, 04/2009, A5E02414743-01 Abbreviation Term M eaning CPU Central Proces sing Unit CPU CRT Cathode Ray Tube CSA Canadia.
List of abbreviations C.1 Abbreviations SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 151 Abbreviation Term M eaning HD Hard disk Hard disk HDA High Defin ition Audio HDD Hard Disk .
List of abbreviations C.1 Abbreviations SIMATIC IPC427C 152 Operating Instructions, 04/2009, A5E02414743-01 Abbreviation Term M eaning NC Not Connected Not connected NCQ Native Command Queuing Automa .
List of abbreviations C.1 Abbreviations SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 153 Abbreviation Term M eaning SO-DIMM Small Outline Dual Inline Memory Modu le SOM SafeCard on.
List of abbreviations C.1 Abbreviations SIMATIC IPC427C 154 Operating Instructions, 04/2009, A5E02414743-01.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 155 Glossary AHCI mode AHCI is a standardized method to address the SATA controller. A HCI describes a struc ture in the RAM, which contains a general area for control and statu s, as well as a command list.
Glossary SIMATIC IPC427C 156 Operating Instructions, 04/2009, A5E02414743-01 CE marking C ommunauté E uropéene The CE mark c onfirms compliance of the product with corresponding EC Directives, for example, with the EMC Directiv e.
Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 157 Device configuration The configuration of a PC or pro grammin g device contains info rm ation on hardware and device options, such as memory configuration, d rive types, moni tor, network address, etc.
Glossary SIMATIC IPC427C 158 Operating Instructions, 04/2009, A5E02414743-01 ESD directive Directive for using ele ctros tatic sensitive components. Ethernet Local network (bus structure) fo r text an d data communication w ith a transfer rate of 10/100/1000 Mbps.
Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 159 IGD Integrated Graphics Device. Graph ics interface integrated in th e chipset. Image This refers to the image, for exam ple, of hard disk partitions saved to a file in order to restore them when necessary.
Glossary SIMATIC IPC427C 160 Operating Instructions, 04/2009, A5E02414743-01 License key The license key represents the el ectronic license stamp of a li cense.
Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 161 NEC Class 2 The "NEC", National Electrical Code, is the USA colle ction of r egulations that generally correspond to German VDE 0100 st andard s.
Glossary SIMATIC IPC427C 162 Operating Instructions, 04/2009, A5E02414743-01 PCMCIA Association consisti ng of approx. 450 member companies of the c ompute r industry whose focus is set on providing worldw ide standards for mini aturizati on and flexible use of PC expansion cards in o rder to provide basic tech nologies to the m arket.
Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 163 PXE server A P reboot E x ecution E nvironment server is part of a net work environment and can provide software to connected computers ev en before they boot. This can involve operating system installations or servici ng tools, for ex ample.
Glossary SIMATIC IPC427C 164 Operating Instructions, 04/2009, A5E02414743-01 SCSI interface Small Computer System Interface Interface for connec ting SCSI d evices such as hard disk drives or optical drives. Session at once In session at once, the CD can be written to both with an audio session and a data session.
Glossary SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 165 Warm restart The restart of a computer after a program was aborted. The oper ating system i s loaded and restarted again. The CTRL + ALT+ D EL hotkey can be used to initi ate a warm restart.
Glossary SIMATIC IPC427C 166 Operating Instructions, 04/2009, A5E02414743-01.
SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 167 Index 2 24 V DC power supply Connectin g, 34 A Abbreviation s, 149, 154 Ambient and environmental conditio ns, 24 B Battery, 10, 72.
Index SIMATIC IPC427C 168 Operating Instructions, 04/2009, A5E02414743-01 Watchdog, 138 Enhanced Write Filter, 48 Equipotential bonding, 18, 35, 55, 68 Error Messag es Troubleshooting, 89 ESD directiv.
Index SIMATIC IPC427C Operating Instructions, 04/2009, A5E02414743 -01 169 Compact Flash card, 81 Hard disk, 81 SSD drive, 81, 82 Windows XP Professional, 81, 82 PCI cards, 59 PCI-104 interface, 112 P.
Index SIMATIC IPC427C 170 Operating Instructions, 04/2009, A5E02414743-01.
An important point after buying a device Siemens IPC427C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens IPC427C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens IPC427C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens IPC427C you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens IPC427C will certainly help you make a decision on the purchase.
If you already are a holder of Siemens IPC427C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens IPC427C.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens IPC427C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens IPC427C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
