Instruction/ maintenance manual of the product CD 3002 Siemens
Go to page of 8
Yo u r ey e in hel l Air Blower for CD 3002.
© Siemens L aser Anal ytics AB Jan 2001 CD 3002 Air bl ower man ual Docum ent numbe r: CID 30 02-111 0 Rev. 1A.
LDS 3000 Air blower Content I Content 1. Purging of CD 3002 using air blower 1 1.1 General 1 1.2 Installation 1 1.3 Maintanance 4.
Content LDS 3000 Air blower II.
LDS 3000 Air blower Purging of CD 3 002 using air blower 1 1. Purging of CD 3002 using air blower 1.1 General In application with high dust load and ash build-up in front of the lens in CD 3002 very high purging flows may be necessary. For these applica- tions an air blower producing flow rates in the 1000 ltr/min.
Purging of CD 3 002 using air blower LDS 3000 Air blower 2 Flow rate vs length of the tube betwe en the air blower and the sensor. Mechanical The air blower should be monted close to the sensor using bolts of the di- mension M10 on the follow ing positions Position of mounting holes.
LDS 3000 Air blower Purging of CD 3 002 using air blower 3 The position of the ai r blower should either be horizontal with the mount- ing plate facing down wards or vertical with the air exit facing upwards. The figure b elow shows a good way of setting up the sensor with an air blower.
Purging of CD 3 002 using air blower LDS 3000 Air blower 4 1.3 Maintanance The major maintanance on the air blower is to change the input filter at a regular interval. The time between changes is totally dependent on the environment in which the air blow er operates.
An important point after buying a device Siemens CD 3002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens CD 3002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens CD 3002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens CD 3002 you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens CD 3002 will certainly help you make a decision on the purchase.
If you already are a holder of Siemens CD 3002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens CD 3002.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens CD 3002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens CD 3002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
