Instruction/ maintenance manual of the product 30ISDN Siemens
Go to page of 62
Profiset 30isdn engl.: A30853-X300-B107-1-7619 Profiset 30isdn bk_front.fm5 27.11.98 ACHTUNG! Schnittkante ggf. auf Titelseite U1 nach außen versetzen wg.
Profiset 30isdn II kap00.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Profiset 30isdn Y our guide to this manual Putting the telephone into operation ( ➔ page 1). Conducting a call ( ➔ page 9). Defining telephone settings ( ➔ page 27).
Profiset 30isdn III kap00.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Overview: Profiset 30isdn 1 2 3 4 5 6 7 8 9 10 Keypad Loudspeaker key Minus key Plus key Mute key Number redial ke.
Profiset 30isdn IV kap00.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Overview: Keys S Programming key T o start or exit a programming procedure. s Locking key T o activate/deactivate the total lock. T o change the display for call numbers exceeding 12 digits.
Profiset 30isdn V kap00.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Safety precautions and approval Safety precautions The Profiset 30isdn complies with the European standard E N 60 950, which deals with the safety of information technology equipment including electrical business equipment.
Profiset 30isdn VI kap00.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Approval and conformity Y our Profiset 30isdn has a TYPE-EXAMIN ATION CERTIFICATE. It has been certified in accordance with EU Guideline 91/263/EWG Telecommunication T erminals.
Contents VII profi30.IVZ 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Profiset 30isdn .............................................................................................................................. II Your guide to this manual .
Contents VIII profi30.IVZ 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Quick reference for available telephone settings ................................................................... 27 Programming the telephone settings ..............
Putting the telephone into operation 1 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Putting the telephone into operation Symbols used in these operating instructions In some cases display messages are provided. Example: For information on display-driven operation of the Profiset 30isdn, see page 7.
Putting the telephone into operation 2 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Step 1: Check the contents of the package The default package contains: ● 1 Profiset 30isdn, .
Putting the telephone into operation 3 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Step 2: Connect the telephone Handset cord (coiled) Both ends of the handset cord have the same connecto r.
Putting the telephone into operation 4 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Note that the NTBA must be connected to the power grid.
Putting the telephone into operation 5 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Step 5: Setting the national variants This setting takes account of specific national features .
Putting the telephone into operation 6 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Step 7: T ry out the telephone Y ou can now try out your Profiset 30isdn. Calling another party: c Li f t the handset. T Enter the call numbe r . The number is dialled.
Display-driven telephone operation 7 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Display-driven telephone operation Y our Profiset 30isdn has a one-line display that contains several symbols.
Display-driven telephone operation 8 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Connected mode In the course of a call, the call number of the called party (if it is transmitted or display is not suppressed) is shown.
Outgoing and incoming calls 9 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Outgoing and incoming calls Calling users On-hook dialling Y ou can enter (or change) the call number and then set up the connection when the handset is on-hook.
Outgoing and incoming calls 10 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Number redial (automatic dialling) The last five numbers dialled are stored automaticall y.
Outgoing and incoming calls 11 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Dialling call numbers using the Speed dialling keys (automatic dialling) 10 frequently used call numbers can be dialled quickly and easily using Speed dialling keys.
Outgoing and incoming calls 12 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Accepting a call The Profiset 30isdn rings with a particular call signal.
Outgoing and incoming calls 13 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Call waiting Y ou must apply to your local network operator for the “Call waiting“ feature. While you are conducting a call, a second incoming call is signalled acoustically and visuall y.
Outgoing and incoming calls 14 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Call list If a caller does not reach you or if a caller or a queued caller is rejected, the relevant call number (if it is known) is stored in the call list.
Outgoing and incoming calls 15 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Deleting the call list Deleting the call list is possible via the “Clearing memo- ry“ function ( ➔ page 39). Callback Y ou must apply to your local network operator for this fea- ture.
Outgoing and incoming calls 16 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Accepting a callback Y ou have activated a callback with a busy part y . Clearing a callback Ending a call – disconnecting When you actively close the connection, the telephone re- turns to the idle mode and displays date and time.
Convenient and secure telephone communication 17 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Convenient and secure telephone communication Activating/deactivating open listening If those present in your room wish to listen to your con- versation, you can switch on the loudspeake r.
Convenient and secure telephone communication 18 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Parking a call Y ou can temporarily park a call in order to ● reactivate it at a la.
Convenient and secure telephone communication 19 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Locking your telephone Y ou can lock your Profiset 30isdn against possible unau- thorized use: ● T otal lock , only allows you to dial a preset direct station selection number (Programming direct station selection: ➔ page 26).
Convenient and secure telephone communication 20 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 DTMF signalling When a connection is set up, you can use the keypad to transmit DTMF signals (tones in d ual- t one m ulti f requency), e.
Convenient and secure telephone communication 21 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Overview: DTMF / keypad signalling The following table illustrates which signalling m.
Calls involving two or more parties 22 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Calls involving two or more parties Calling the second party (consultation) Y ou can consult with another party in the course of a call. The first call is put on hold during the consultation call.
Calls involving two or more parties 23 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Disconnecting one party Y ou can disconnect one party in the course of a consulta- tion call. A f terwards,you are automatically connected to the remaining part y .
Calls involving two or more parties 24 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Ending a conference Y ou can disconnect one party or toggle between the two parties. To terminate the conference completel y , replace the handset.
Programming keys on the telephone 25 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Programming keys on the telephone Programming the destination dialling keys Each Destination dial.
Programming keys on the telephone 26 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 If you press the Number redial key, you can also program another Speed dialling key without having to exit the pro- gramming procedure.
Quick reference for available telephone settings 27 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Quick reference for available telephone settings Description Procedure T elephone settings page Call number for call forwarding uncondit.
Programming the telephone settings 28 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Programming the telephone settings Nearly all settings of your telephone (except parking a call, input of the connection code and checking the settings of the telephone) can only be programmed with the handset on-hook (idle mode).
Programming the telephone settings 29 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Ringer volume Y ou can set the volume of the call signal to four levels ( 1 ...4: 1=very lo w, 4=very loud). The volume is preset to level 2. If the volume is set to level 0, the call signal is de- activated (do not disturb).
Programming the telephone settings 30 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Handset and loudspeaker volume Y ou can set the volume of the handset and loudspeaker to four levels ( 1 ...4: 1=minimum volume, 4=maximum vol- ume).
Programming the telephone settings 31 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 T runk code for operation at a PBX A trunk code must be defined if the Profiset 30isdn is op- erated at a private branch exchange (PBX).
Programming the telephone settings 32 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 National variants This setting is used to define country-specific features such as the signalling method to control the ISDN servic- es. To set the national variant, a two-digit or three-digit country code must be entered.
Programming the telephone settings 33 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Signalling method to control the ISDN services In most of the countries local network operators .
Programming the telephone settings 34 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Connection code for parking/resuming a call The connection code is a number under which a call can be parked and later resumed ( ➔ page 18: ” Parking a call “).
Programming the telephone settings 35 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 T ariff unit factor Before you switch on the charge mete r , you should enter the tariff unit facto r , i.e. the costs calculated by your net- work operator for each call charge unit.
Programming the telephone settings 36 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Activating/deactivating the display of charge/call time of the last outgoing call The charge and call time for the last outgoing call (if it is activated) are displayed for approx.
Programming the telephone settings 37 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Activating/deactivating the summation meter for charges The sum of all charges accrued, since the most recent clearing of the summation mete r , can be displayed.
Programming the telephone settings 38 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Activating/deactivating the display of your own call number Y ou must apply to your local network operator for this fea- ture. Inquire about the respective charges.
Programming the telephone settings 39 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Clearing memory Y ou can clear any of the following memories via input of certain codes: ● “.
Programming the telephone settings 40 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Restoring the as-supplied condition The Profiset 30isdn can be reset to the default settings. To restore the as-supplied condition, it is absolutely nec- essary to enter the password, also if it is still programmed to 0000.
Important information for installation and operation 41 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Important information for installation and operation Maintenance To clean the telephone, use a damp or antistatic cloth. Never use any abrasive cleaning agents.
Important information for installation and operation 42 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 ISDN supplementary services Y our Profiset 30isdn supports a lot of ISDN services, e.
Important information for installation and operation 43 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Overview: Signal tones The switching signals (ringing tone, busy tone, dial tone) come directly from the network operato r . Only the follow- ing signal tones are specific to this telephone.
Important information for installation and operation 44 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Warranty Siemens AG offers a six months warranty for this device from the date of purchase from the deale r . Always retain receipts as proof of date of purchase.
Important information for installation and operation 45 kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Procedure in the case of malfunctions The cause of an operating error need not necessarily lie with the device. Y ou may save time and money by rectify- ing simple faults yourself.
ISDN glossary 46 glossar.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 ISDN glossary The ISDN glossary should help you understand the many new terms and abbreviations relating to ISDN. AOC-D ISDN service. Abbreviation for A dvice o f C harge D uring Call and means that the charge of the call is displayed during the call.
ISDN glossary 47 glossar.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Dual tone multi- frequency (DTMF) A signalling method whereby the information is transmitted to the switching centre in the form of tones with various frequencies. Euro ISDN Uniform European ISDN standard introduced at the end of 1993.
ISDN glossary 48 glossar.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Service indicator A feature of ISDN. The service indicato r , which is sent with every ISDN connection, indicates the type of connection required.
Quick reference guide 49 kurzba.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Quick reference guide Number redial: c è W oder W ... W è d Programming the Destination dialling keys: S .
Quick reference for available telephone settings 50 kurzba.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Quick reference for available telephone settings Description Procedure T elephone settings page Call number for call forwarding uncondit.
Index 51 profi30.SIX 27.11.1998 Profiset 30isdn engl.: A30853-X300-B107-1-7619 A Accepting a call ............................................. 12 Accepting a callback ...................................... 16 Accepting call waiting ..................
Index 52 profi30.SIX 27.11.1998 Profiset 30isdn engl.: A30853-X300-B107-1-7619 S Safety .............................................................. V Setting the national variants ............................ 5 Siemens Service .....................
back.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619.
back.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619 Issued by Information and Communication Products Hofmannstrasse 51 D 81359 München Siemens Aktiengesellschaft http://www.siemens.de © Siemens AG 1998. All rights reserved. Subject to availability.
An important point after buying a device Siemens 30ISDN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens 30ISDN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens 30ISDN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens 30ISDN you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens 30ISDN will certainly help you make a decision on the purchase.
If you already are a holder of Siemens 30ISDN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens 30ISDN.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens 30ISDN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens 30ISDN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center