Instruction/ maintenance manual of the product WH30XLR Shure
Go to page of 10
WH30XLR ONL Y MODEL WH30 CONDENSER HEADSET MICROPHONE Models WH30TQG and WH30XLR User Guide 2003, Shure Incorporated 27D3121 (Rev . 4) Printed in U.
1 English INTRODUCTION The Shure Model WH30 is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser cartridge suitable for all applications where mobility , comfort, low microphone-visibility , and high sound quality are required.
English 2 MICROPHONE P ARTS The WH30 consists of the following parts (see Figure 1). 1. Microphone Cartridge and Windscreen 2. Microphone Boom and Cartridge Housing 3. Isolation Shock Mount 4. Boom Hinge (rotates as shown) 5. Cable 6. Elastic Headband 7.
3 English FIGURE 2. WEARING THE HEADSET FIGURE 3. POSITIONING THE MICROPHONE ADJUSTING THE HEADSET • If the headset feels loose or uncomfortable, carefully bend the sides of the wireframe to make it tighter or looser (see Figure 4A). The angle of the wire- frame earpieces may also need adjustment (see Figure 4B).
English 4 FIGURE 5. ELASTIC HEADBAND ADJUSTMENT USING THE CABLE RET AINER AND CLOTHING CLIP Use the cable retainer on the wire frame of the headset to position the microphone cable as desired. The supplied spring-loaded clothing clip secures the microphone cable to the user ’s clothing to help avoid entanglement.
5 English 3. W ash the headband in mild, soapy water and rinse it in clean water . 4. Allow the headband to air-dry thoroughly . 5. Slide the headband around the wireframe to its original position.
English 6 SPECIFICA TIONS WH30TQG WH30XLR T ype Condenser, electret bias Condenser , electret bias with integrated preamplifier Frequency Response 40 to 20,000 Hz (See Figure 6) Polar Pattern Unidirec.
7 English FREQUENCY IN Hz RELA TIVE RESPONSE IN dB 1 cm. (0.4 in.) 61 cm. (24 in.) FIGURE 6 . WH30: TYPICAL FREQUENCY RESPONSE FIGURE 7. WH30: TYPICAL POLAR P A TTERNS.
English 8 WIRING DIAGRAMS MODEL WH30XLR MODEL WH30TQG 1 2 3 2 3 1 1 2 3 4 CARTRIDGE CARTRIDGE RED (to drain) (DC bias) BLACK (to source) (audio) SHIELD SHIELD BLACK (to source) (audio) RED (to drain) (DC bias) PREAMP XLR CONNECTOR T A4F CONNECTOR RC FIL TER RC FIL TER FET FET G G D D S S MIC ELEMENT MIC ELEMENT FIGURE 8.
T rademark Notices: The stylized Shure logo and the word “Shure” are registered trademarks of Shure Incorporated in the United States. “T eflon” is a registered trademark of E.I. duPont de Nemours and Company in the United States. “Croakies” is a registered trademark of Life-Link International, Inc.
An important point after buying a device Shure WH30XLR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shure WH30XLR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shure WH30XLR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shure WH30XLR you will learn all the available features of the product, as well as information on its operation. The information that you get Shure WH30XLR will certainly help you make a decision on the purchase.
If you already are a holder of Shure WH30XLR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shure WH30XLR.
However, one of the most important roles played by the user manual is to help in solving problems with Shure WH30XLR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shure WH30XLR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center