Instruction/ maintenance manual of the product WH30 Shure
Go to page of 12
© 2006, Shure Incor porated 27G3121 (Rev. 9) Printed in U.S.A. Models WH30 TQG and W H 30XLR User Guide WH30XLR ONL Y MODEL WH30 CONDENSER HEADSET MICROPHONE MICROFONO A CONDENSA TORE CON SUPPORTO A .
2 INTRODUCTION The Shure Model WH30 is a light y et rugged head set microphone. Designed for vocalists and instrument-playing vocalists, the W H30 utilizes a high qua lity electret-con denser car- tridge suitable for all applications where mob ility, comfort, low m icrophone-visibility, and high sound quality are required.
3 MICROPHONE PARTS The WH30 consist s of the following pa rts (see Figure 1). WH30 HEADSET MICROPHONE PARTS FIGURE 1 COLLAPSIBLE MICROPHONE BOOM The WH30 head set features a collapsib le boom for shipment and storage. Before wearing th e headset, unfold the boom by rot ating it awa y from the wireframe u ntil it snaps into plac e.
WEARING THE HEADSET Place the headset wirefr ame around your head so that the e l astic headband ba nd lay hor- izontally acr oss the back of your head and the ends of the wirefram e fit over your ears. You may position the e lastic headba nd either abo ve or below t he wireframe f or the great- est comfort and st ability.
5 ADJUSTING THE HEADSET • If the he adset fee ls loose o r uncomfor table, carefull y bend the sides of t he wire- frame to ma ke it tighter or l ooser (see Figure 4 A). The angle of t he wireframe ear- pieces may also need adjustmen t (see Figu re 4B).
6 CONNECTING THE WH30 TO A SOUND SYSTEM Wireless Ap plic ations (WH30TQG) 1. Connect the mini TA4F conne ctor from the WH30 to a wireless microphone trans- mitter su ch as the Shur e T1 body pack trans mitter. 2. See the user guide for your wirele ss transmitter and receiver system fo r adjusting gain and other parameters.
7 4. Rinse the windscre en in clean wa ter and dry it with a clea n cloth or paper t owel. Allow it to air -dry thoroughly. 5. When the windscreen is dry, slide it over the WH30 micr ophone until the retain - ing ring sn aps into pl ace.
8 SPECIFICATIONS WH30T QG WH30XLR Type Condenser, electret bias Condenser, electret bia s with integrated preamplifier Frequenc y Re spon se 40 to 20,000 Hz (See Figure 6) Polar Pattern Unidirectional.
9 TYPICAL WH30 FREQUENCY RESPONSE FIGURE 6 TYPICAL WH30 POLAR P ATTERNS FIGURE 7 Hz dB 1 cm. (0.4 in.) 61 cm. (24 in.).
10 WIRING DIAGRAMS WH30 WIRING DIAGRAMS FIGURE 8.
47.
48 SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-460 8, U.S.A. Phone: 847-600-2000 U.
An important point after buying a device Shure WH30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shure WH30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shure WH30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shure WH30 you will learn all the available features of the product, as well as information on its operation. The information that you get Shure WH30 will certainly help you make a decision on the purchase.
If you already are a holder of Shure WH30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shure WH30.
However, one of the most important roles played by the user manual is to help in solving problems with Shure WH30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shure WH30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
