Instruction/ maintenance manual of the product MX4180 Shure
Go to page of 20
MX412D MX418D Printed in U.S.A. www.shure.com © 2009 Shure Incorporated 27A14051 (Rev. 2) MX400D.
MX400D /C (R185) /S (R184) 2 Shure Microflex ® MX400D Series microphones are miniature electret condenser gooseneck mi- crophones with a desktop base and a 3 m (10 ft.) cable. Desktop base allows microphones to be used in multi-purpose rooms where quick setup is required, or where permanent installation is impractical.
3 Connecting to an Automatic Mixer Use these settings if connecting the microphone to an automatic mixer or other device that mutes audio and controls the LED. 1. Connect logic leads to the automatic mixer. Connect the LED IN to the gate output to illumi- nate the LED when that channel is gated on.
102.1 mm (4 9/16 in.) 50.8 mm (2 1/32 in.) 161.9 mm (6 3/8 in.) MX412D: 355.4 mm (14 in.) MX418D: 501.7 mm (19 3 / 4 in.) approximately 3 m (10 ft) MIC ELEMENT 220 pF 220 pF FET 86E8958 + MX400D 4 Spe.
MX400D /C (R185) /S (R184) 5 Les Microflex ® série MX400D sont des micro- phones électrostatiques à électret miniatures à col de cygne avec pied pour table et câble de 3 m (10 pi).
6 Raccordement à un mélangeur automatique Utiliser ces réglages pour raccorder le micro- phone à un mélangeur automatique ou un autre appareil qui coupe le son et contrôle le témoin DEL. 1. Connecter les bornes logiques au mélangeur automatique.
102.1 mm (4 9/16 in.) 50.8 mm (2 1/32 in.) 161.9 mm (6 3/8 in.) MX412D: 355.4 mm (14 in.) MX418D: 501.7 mm (19 3 / 4 in.) approximately 3 m (10 ft) MIC ELEMENT 220 pF 220 pF FET 86E8958 + MX400D 7 Car.
MX400D /C (R185) /S (R184) 8 Shure Microflex ® Mikrofone der Reihe MX400D sind Mini-Elektretkondensatormikrofone in Schwanenhalsausführung mit einem Tischsockel und einem 3 m langen Kabel.
9 Anschluss an eine automatische Mischstufe Diese Einstellungen verwenden, wenn das Mikrofon an eine automatische Mischstufe oder ein anderes Gerät angeschlossen wird, die bzw. das den Ton stummschaltet und die LED steuert. 1. Die Logikterminals an die automatische Mischstufe anschließen.
102.1 mm (4 9/16 in.) 50.8 mm (2 1/32 in.) 161.9 mm (6 3/8 in.) MX412D: 355.4 mm (14 in.) MX418D: 501.7 mm (19 3 / 4 in.) approximately 3 m (10 ft) MIC ELEMENT 220 pF 220 pF FET 86E8958 + MX400D 10 Te.
MX400D /C (R185) /S (R184) 1 1 Los micrófonos Microflex ® serie MX400D de Shure son micrófonos de condensador de elec- treto miniatura con cuello de cisne que tienen una base para escritorio y un cable de 3 m (10 pies) de largo.
12 Conexión a consola mezcladora automática Utilice esta configuración si se va a conectar el micrófono a una consola mezcladora automática o a otro dispositivo que controla el silenciamiento y el LED. 1. Conecte los bornes de la entrada lógica a la consola mezcladora automática.
102.1 mm (4 9/16 in.) 50.8 mm (2 1/32 in.) 161.9 mm (6 3/8 in.) MX412D: 355.4 mm (14 in.) MX418D: 501.7 mm (19 3 / 4 in.) approximately 3 m (10 ft) MIC ELEMENT 220 pF 220 pF FET 86E8958 + MX400D 13 Es.
MX400D /C (R185) /S (R184) 14 I microfoni Shure Microflex ® Serie MX400D sono microfoni a collo d’oca a condensatore a elettrete tipo miniatura dotati di base da tavolo e cavo da 3 m (10 piedi).
15 Collegamento al mixer automatico Utilizzate queste impostazioni in caso di collega- mento del microfono ad un mixer automatico o altro dispositivo di silenziamento dell’audio e di comando del LED. 1. Collegate i terminali logici al mixer automatico.
102.1 mm (4 9/16 in.) 50.8 mm (2 1/32 in.) 161.9 mm (6 3/8 in.) MX412D: 355.4 mm (14 in.) MX418D: 501.7 mm (19 3 / 4 in.) approximately 3 m (10 ft) MIC ELEMENT 220 pF 220 pF FET 86E8958 + MX400D 16 Da.
MX400D /C (R185) /S (R184) 17 Shure Microflex ® MX400Dシリーズマイクロホン は、ミニエレクトレットコンデンサグースネック 型マイクロホンで、デスクトッ.
18 自動ミキサーへの接続 これらの設定は、自動ミキサー、または音声をミ ュートしLEDを制御する他の装置にマイクロホン を接続する場合に使用してください。 1.
102.1 mm (4 9/16 in.) 50.8 mm (2 1/32 in.) 161.9 mm (6 3/8 in.) MX412D: 355.4 mm (14 in.) MX418D: 501.7 mm (19 3 / 4 in.) approximately 3 m (10 ft) MIC ELEMENT 220 pF 220 pF FET 86E8958 + MX400D 19 .
SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A. Phone: 847-600-2000 U.
An important point after buying a device Shure MX4180 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shure MX4180 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shure MX4180 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shure MX4180 you will learn all the available features of the product, as well as information on its operation. The information that you get Shure MX4180 will certainly help you make a decision on the purchase.
If you already are a holder of Shure MX4180, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shure MX4180.
However, one of the most important roles played by the user manual is to help in solving problems with Shure MX4180. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shure MX4180 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
