Instruction/ maintenance manual of the product FP24 Shure
Go to page of 6
General Description Th e Shure FP24 is a studio-quality two-channel, portable, stereo microphone mixer . With assignable L-C-R inputs, built-in slate mi- crophone, 1 kHz tone oscillator , and headphone monitor , the FP24 is extremely flexible.
2 Specifications Gain: Mic Input to Output, per channel, continuously variable Output Gain Range LINE – ∞ – 66 dB T APE – ∞ – 56 dB Frequency Response: 20 Hz – 30 kHz, +0.
3 Front Panel Controls, Connectors, and Indicators 1 2 L C R L C R T APE RTN SLA TE 1kHz METER L R –30 –15 0 +4 +8 +12 +16 INT EXT PHONES POWER MIC FP24 3 4 5 6 78 91 0 1 1 12 13 12 Figure 1. Front Panel 1. Input Gain Controls Sealed, conductive plastic rotary potentiometers.
4 Output Panel Connectors 1(L) 2(R) LINE OUTPUTS 5–14 VDC + – T APE RTN 1 2 3 4 5 Figure 3. Side Output Panel 1. Strap Slot Attachment point for camera straps. 2. T ape Return Input Connector 3.5 mm ( 1 / 8 in.) TRS stereo (unbalanced) input for head- phone monitoring of external audio sources.
5 Limiters Th e FP24 has two built-in peak-responding limiters, one for each input channel. Each limiter has a two-stage circuit: the first stage keeps the input gain stage from clipping; the second stage limits the variable gain stage according to the Limiter Threshold control set- ting.
6 NOTE: When interconnecting the FP24 and FP33, inputs from the FP24 appear at the FP33 mixbus with their polarity reversed. (This is unavoidable due to the nature of the interconnection.
An important point after buying a device Shure FP24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shure FP24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shure FP24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shure FP24 you will learn all the available features of the product, as well as information on its operation. The information that you get Shure FP24 will certainly help you make a decision on the purchase.
If you already are a holder of Shure FP24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shure FP24.
However, one of the most important roles played by the user manual is to help in solving problems with Shure FP24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shure FP24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
