Instruction/ maintenance manual of the product 55SH SERIES II Shure
Go to page of 2
GENERAL The Model 55SH Series II provides the Shure classic UNlDYNE II design coupled with modern acoustic compo- nents to meet today’s performance standards. This micro- phone is excellent for vocal pickup with its characteristic Shure presence peak.
2 Impedance Microphone rating impedance is 150 ohms (270 ohm actual) for connection to microphone inputs rated at 75 to 300 ohms Output Level (at 1,000 Hz) Open Circuit V oltage –78.0 dB (0.13 mV) . . . . . . . . . . . 0 dB = 1 volt per microbar Power Level –58.
An important point after buying a device Shure 55SH SERIES II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shure 55SH SERIES II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shure 55SH SERIES II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shure 55SH SERIES II you will learn all the available features of the product, as well as information on its operation. The information that you get Shure 55SH SERIES II will certainly help you make a decision on the purchase.
If you already are a holder of Shure 55SH SERIES II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shure 55SH SERIES II.
However, one of the most important roles played by the user manual is to help in solving problems with Shure 55SH SERIES II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shure 55SH SERIES II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
