Instruction/ maintenance manual of the product (888B-3) Shoprider
Go to page of 20
Mid-Size Scooters User Manual Sunrunner™ 3 ( 888B-3) Sunrunner™ 4 Deluxe (888-4L) Sunrunner™ 3 Deluxe (888-3L) Sunrunne r ™4 (888B-4).
5/11/2004 2 Contents INTRODUCTION ......................................................................................................................... 3 FEATURE GUIDE (FIG. 1-4) ....................................................................
5/11/2004 3 INTRODUCTION Congratulations on your purchase of the Shoprider® scooter. This sc ooter incorporates the latest innovative designs patented and only available on a Shoprider® sc ooter. This scooter can be used in confined spaces both indoors and out.
5/11/2004 4 Sunrunner™ 3 Deluxe (Figure 3) 1. Tiller control head 2. Head light 3. Rear lights & indicators 4. Turn signal indicators 5. Adjustable width armrests 6. Swivel seat 7. Seat height adjustment 8. Black leatherette pillow top reclining captain’s seat 9.
5/11/2004 5 SAFETY ADVICE • Do not carry passengers. • Do not exceed inclines ov er 8 degrees (14% grade). • Do not turn on steep inclines. • Do not turn suddenly at high speeds. • Do not get on or off the scooter unless the brake is on and the scooter is switched off.
5/11/2004 6 EMI Warning Shoprider® scooters may be susceptible to electr omagnetic interference (EMI), which is a kind of interfering electrom agnetic energy (EM) em itted from sources such as radio stations, TV stations, amateur radio (HAM) transm itters, two-way radio, and cellular phones.
5/11/2004 7 ADJUSTMENTS Tiller Angle Adjustment (Fig. 5A&B) On the left hand side at the base of the tiller is a red lever/black knob. Push/pull the lever to release the pin and selec t the required tiller angle. Refit the pin into one of the five location holes.
5/11/2004 8 Armrest Angle Adjustment (Fig. 9) Flip up the armrests to allow access to the adjustment screw and lock nut, unscrew the lock nut and screw the bolt in or out to increase or decrease the angle. Re-tighten the lock-nut. Your scooter is dispatched from the factory with the armrests set parallel to the f loor.
5/11/2004 9 SCOOTER TILLER CONTROLS (FIG. 11A&B) Speed Controls The speed control allows you to set a speed between 1 (minim um) and 10 (m aximum). Battery Level Indicator The number of LED bars lit, shows th e amount of charge left in your batteries.
5/11/2004 10 Electromagnetic Brake The brake is automatically operated when the contro l leve rs are released. There is a s light delay when the scooter decelerates; this allows the scooter to come to a smooth stop. FREE WHEEL OPERATION (FIG. 12) The free wheel release lever (red handle) is locat ed inside the right rear wheel (Fig.
5/11/2004 11 • Your speed setting should be on 1 or 2. • Pull your right hand finger lever, the scooter will move forward slowly. The harder you pull the faster the scooter goes but will only re ach the speed level that has been selected. • Release the lever and the scooter will slowly come to a stop and the m agnetic brake will be applied.
5/11/2004 12 TRANSPORT / STORAGE The scooters are designed to be dismantled into sepa rate sections for trans portation and storage. Your scooter can be dismantled into the following sections: Sunrunner™ 3 (Fig. 13) 1) Basket 2) Deluxe Captain Seat 3) Seat Post & Fasteners 4) Driving Unit Sunrunner™ 4 (Fig.
5/11/2004 13 3. Pull up on the red lever under the seat and at th e same time lift and twist the seat off. 4. Unscrew tightening bolt a nd remove seat post. BATTERIES AND BATTERY CHARGER The Shoprider® scooter is supplied with maintenance free, sealed l ead acid batteries.
5/11/2004 14 Wheels and Tires The wheels of your scooter all have split rims. Th is allows any punctures to be rep aired easily. To change the wheels remove the center bolt and s lide the wheel off its axle.
5/11/2004 15 TECHNICAL SPECIFICATIONS ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. 1. Include the Anti-Tip w heel. 2. Driver weight may exceed weight of the unit; speed must be reduced when turning.
5/11/2004 16 QUARTERLY INSPECTION For your own safety, quarterly inspection and se rvice on the product has to be performed and signed by an authorized provider.
5/11/2004 17 WARRANTY Please refer to warranty information included with unit. Serial No. DISCLAIMER Congratulations on your purchase of the Shoprider® It is not intended to be used by individuals with physical limitations that could prevent the user from operating this unit safely.
5/11/2004 18 Notes.
5/11/2004 19 Notes.
5/11/2004 20 Mid-Size Scooters User Manual Sunrunner™ 3 ( 888B-3) Sunrunner™ 4 Deluxe (888-4L) Sunrunner™ 3 Deluxe (888-3L) Sunrunner™ 4 (888B-4).
An important point after buying a device Shoprider (888B-3) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shoprider (888B-3) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shoprider (888B-3) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shoprider (888B-3) you will learn all the available features of the product, as well as information on its operation. The information that you get Shoprider (888B-3) will certainly help you make a decision on the purchase.
If you already are a holder of Shoprider (888B-3), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shoprider (888B-3).
However, one of the most important roles played by the user manual is to help in solving problems with Shoprider (888B-3). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shoprider (888B-3) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center