Instruction/ maintenance manual of the product 207W Axis
Go to page of 5
AXIS 207W Network Camera Technical Information Version 1.0 page 1 of 5 A few things that should help you get the AXIS 207W connected to your network. It’s not always easy to install new products on your network and this document describes some of the things you may need to configure to get your AXIS 207W connected to your Wireless network.
AXIS 207W Network Camera Technical Information Version 1.0 page 2 of 5 Signal strength It’s important to have good signal strength. In the AXIS 207W web interface you can find info about the signal strength between the Axis 207W and the Access Point/Router: http://IP-address/admin/wlan.
AXIS 207W Network Camera Technical Information Version 1.0 page 3 of 5 Managed mode/Ad-Hoc mode The AXIS 207Ws station mode is default configured to Auto, which means that it will connect to both Access Points/Router in managed mode and othe r devices in Ad-Hoc mode.
AXIS 207W Network Camera Technical Information Version 1.0 page 4 of 5 Encryption It’s of course extremely important to set up th e same configuration in the AXIS 207W as in the Access Point/Router. If they are not using the sa me encryption type and key there will be no communication.
AXIS 207W Network Camera Technical Information Version 1.0 page 5 of 5 UPnP In some cases UPnP affects the Wireless connectio n and in these cases it’s recommended to switch this feature off. This is done from this page: http://IP-address/admin/UPnP.
An important point after buying a device Axis 207W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis 207W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis 207W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis 207W you will learn all the available features of the product, as well as information on its operation. The information that you get Axis 207W will certainly help you make a decision on the purchase.
If you already are a holder of Axis 207W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis 207W.
However, one of the most important roles played by the user manual is to help in solving problems with Axis 207W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis 207W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
