Instruction/ maintenance manual of the product 82010 Shindaiwa
Go to page of 8
O WNER’S MANU AL TM 41RS BROADCAST.
ASSEMBL Y Remove the spreader and com- 1. ponents from the carton. T urn spreader upside down. Insert (2) 1/4-20 x 1 1/2” hex bolts through the attened end of handle brace, frame and leg as shown. Install hex nuts but do not tighten. Repeat on opposite side.
Feed control knob/wire through 4. the T -handle until spring touches the round hole. CAUTION: Do Not Compress Spring At This Time. Feed wire through the square handle tube. Be sure wire passes above the bolts in the handle brace. Secure T -handle to the tube with (1) 1/4-20 x 2” hex bolt.
OPERA TION Check the product package for the rate 1. setting, and recommended swath width. T urn the spreader off by pushing the control knob in. Rotate the rate cam to the proper setting. Always ll the spreader on the driveway 2. or sidewalk-not on the lawn.
HO W T O DETERMINE SPREADER SETTINGS AND SPREAD WIDTH EFFECTIVE P A TTERN WIDTH APPLICA TION RA TE T wo major factors should be considered when determining correct spreader settings of any product: The product application rate, or the amount of material applied per 1,000 square feet.
RA TE SETTING CONVERSION The following provides approximate 41RS settings for those units listed. The following provides approximate 41RS settings when only the product weight, square foot coverage, and visual inspection of the material is available. Conversions should be used as guidelines for establishing proper rate settings.
MAINTEN ANCE WARRANTY Never store unused material in spreader . 1. Return unused product to its original container . W ash spreader thoroughly after each use 2. and dry completely in sun or heated area. Oil the axle bearings, impeller shaft bearing 3.
P ar ts List for SHIND AIWA MODEL 41RS P ART OF OUR SERVICE IS PRO- VIDING REPLACEMENT P AR TS. Parts may be obtained through your local distributor . be sure to give: SPREADER MODEL NUMBER 1. SPREADER NAME 2. P ART NUMBER 3. NAME OF P ART AS SHOWN 4.
An important point after buying a device Shindaiwa 82010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shindaiwa 82010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shindaiwa 82010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shindaiwa 82010 you will learn all the available features of the product, as well as information on its operation. The information that you get Shindaiwa 82010 will certainly help you make a decision on the purchase.
If you already are a holder of Shindaiwa 82010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shindaiwa 82010.
However, one of the most important roles played by the user manual is to help in solving problems with Shindaiwa 82010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shindaiwa 82010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
